summaryrefslogtreecommitdiffstats
path: root/kernel/Documentation/scsi/dc395x.txt
diff options
context:
space:
mode:
authorYunhong Jiang <yunhong.jiang@intel.com>2015-08-04 12:17:53 -0700
committerYunhong Jiang <yunhong.jiang@intel.com>2015-08-04 15:44:42 -0700
commit9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch)
tree1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/Documentation/scsi/dc395x.txt
parent98260f3884f4a202f9ca5eabed40b1354c489b29 (diff)
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/Documentation/scsi/dc395x.txt')
-rw-r--r--kernel/Documentation/scsi/dc395x.txt102
1 files changed, 102 insertions, 0 deletions
diff --git a/kernel/Documentation/scsi/dc395x.txt b/kernel/Documentation/scsi/dc395x.txt
new file mode 100644
index 000000000..88219f966
--- /dev/null
+++ b/kernel/Documentation/scsi/dc395x.txt
@@ -0,0 +1,102 @@
+README file for the dc395x SCSI driver
+==========================================
+
+Status
+------
+The driver has been tested with CD-R and CD-R/W drives. These should
+be safe to use. Testing with hard disks has not been done to any
+great degree and caution should be exercised if you want to attempt
+to use this driver with hard disks.
+
+This is a 2.5 only driver. For a 2.4 driver please see the original
+driver (which this driver started from) at
+http://www.garloff.de/kurt/linux/dc395/
+
+Problems, questions and patches should be submitted to the mailing
+list. Details on the list, including archives, are available at
+http://lists.twibble.org/mailman/listinfo/dc395x/
+
+Parameters
+----------
+The driver uses the settings from the EEPROM set in the SCSI BIOS
+setup. If there is no EEPROM, the driver uses default values.
+Both can be overridden by command line parameters (module or kernel
+parameters).
+
+The following parameters are available:
+
+ - safe
+ Default: 0, Acceptable values: 0 or 1
+
+ If safe is set to 1 then the adapter will use conservative
+ ("safe") default settings. This sets:
+
+ shortcut for dc395x=7,4,9,15,2,10
+
+ - adapter_id
+ Default: 7, Acceptable values: 0 to 15
+
+ Sets the host adapter SCSI ID.
+
+ - max_speed
+ Default: 1, Acceptable value: 0 to 7
+ 0 = 20 Mhz
+ 1 = 12.2 Mhz
+ 2 = 10 Mhz
+ 3 = 8 Mhz
+ 4 = 6.7 Mhz
+ 5 = 5.8 Hhz
+ 6 = 5 Mhz
+ 7 = 4 Mhz
+
+ - dev_mode
+ Bitmap for device configuration
+
+ DevMode bit definition:
+ Bit Val(hex) Val(dec) Meaning
+ *0 0x01 1 Parity check
+ *1 0x02 2 Synchronous Negotiation
+ *2 0x04 4 Disconnection
+ *3 0x08 8 Send Start command on startup. (Not used)
+ *4 0x10 16 Tagged Command Queueing
+ *5 0x20 32 Wide Negotiation
+
+ - adapter_mode
+ Bitmap for adapter configuration
+
+ AdaptMode bit definition
+ Bit Val(hex) Val(dec) Meaning
+ *0 0x01 1 Support more than two drives. (Not used)
+ *1 0x02 2 Use DOS compatible mapping for HDs greater than 1GB.
+ *2 0x04 4 Reset SCSI Bus on startup.
+ *3 0x08 8 Active Negation: Improves SCSI Bus noise immunity.
+ 4 0x10 16 Immediate return on BIOS seek command. (Not used)
+ (*)5 0x20 32 Check for LUNs >= 1.
+
+ - tags
+ Default: 3, Acceptable values: 0-5
+
+ The number of tags is 1<<x, if x has been specified
+
+ - reset_delay
+ Default: 1, Acceptable values: 0-180
+
+ The seconds to not accept commands after a SCSI Reset
+
+
+For the built in driver the parameters should be prefixed with
+dc395x. (eg "dc395x.safe=1")
+
+
+Copyright
+---------
+The driver is free software. It is protected by the GNU General Public
+License (GPL). Please read it, before using this driver. It should be
+included in your kernel sources and with your distribution. It carries the
+filename COPYING. If you don't have it, please ask me to send you one by
+email.
+Note: The GNU GPL says also something about warranty and liability.
+Please be aware the following: While we do my best to provide a working and
+reliable driver, there is a chance, that it will kill your valuable data.
+We refuse to take any responsibility for that. The driver is provided as-is
+and YOU USE IT AT YOUR OWN RESPONSIBILITY.