summaryrefslogtreecommitdiffstats
path: root/kernel/Documentation/networking/pktgen.txt
diff options
context:
space:
mode:
authorJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-11 10:41:07 +0300
committerJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-13 08:17:18 +0300
commite09b41010ba33a20a87472ee821fa407a5b8da36 (patch)
treed10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/Documentation/networking/pktgen.txt
parentf93b97fd65072de626c074dbe099a1fff05ce060 (diff)
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page. During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/Documentation/networking/pktgen.txt')
-rw-r--r--kernel/Documentation/networking/pktgen.txt150
1 files changed, 109 insertions, 41 deletions
diff --git a/kernel/Documentation/networking/pktgen.txt b/kernel/Documentation/networking/pktgen.txt
index 0344f1d45..f4be85e96 100644
--- a/kernel/Documentation/networking/pktgen.txt
+++ b/kernel/Documentation/networking/pktgen.txt
@@ -1,6 +1,6 @@
- HOWTO for the linux packet generator
+ HOWTO for the linux packet generator
------------------------------------
Enable CONFIG_NET_PKTGEN to compile and build pktgen either in-kernel
@@ -50,17 +50,33 @@ For ixgbe use e.g. "30" resulting in approx 33K interrupts/sec (1/30*10^6):
# ethtool -C ethX rx-usecs 30
-Viewing threads
-===============
-/proc/net/pktgen/kpktgend_0
-Name: kpktgend_0 max_before_softirq: 10000
-Running:
-Stopped: eth1
-Result: OK: max_before_softirq=10000
+Kernel threads
+==============
+Pktgen creates a thread for each CPU with affinity to that CPU.
+Which is controlled through procfile /proc/net/pktgen/kpktgend_X.
+
+Example: /proc/net/pktgen/kpktgend_0
+
+ Running:
+ Stopped: eth4@0
+ Result: OK: add_device=eth4@0
+
+Most important are the devices assigned to the thread.
+
+The two basic thread commands are:
+ * add_device DEVICE@NAME -- adds a single device
+ * rem_device_all -- remove all associated devices
+
+When adding a device to a thread, a corrosponding procfile is created
+which is used for configuring this device. Thus, device names need to
+be unique.
-Most important are the devices assigned to the thread. Note that a
-device can only belong to one thread.
+To support adding the same device to multiple threads, which is useful
+with multi queue NICs, a the device naming scheme is extended with "@":
+ device@something
+The part after "@" can be anything, but it is custom to use the thread
+number.
Viewing devices
===============
@@ -69,29 +85,32 @@ The Params section holds configured information. The Current section
holds running statistics. The Result is printed after a run or after
interruption. Example:
-/proc/net/pktgen/eth1
+/proc/net/pktgen/eth4@0
-Params: count 10000000 min_pkt_size: 60 max_pkt_size: 60
- frags: 0 delay: 0 clone_skb: 1000000 ifname: eth1
+ Params: count 100000 min_pkt_size: 60 max_pkt_size: 60
+ frags: 0 delay: 0 clone_skb: 64 ifname: eth4@0
flows: 0 flowlen: 0
- dst_min: 10.10.11.2 dst_max:
- src_min: src_max:
- src_mac: 00:00:00:00:00:00 dst_mac: 00:04:23:AC:FD:82
- udp_src_min: 9 udp_src_max: 9 udp_dst_min: 9 udp_dst_max: 9
- src_mac_count: 0 dst_mac_count: 0
- Flags:
-Current:
- pkts-sofar: 10000000 errors: 39664
- started: 1103053986245187us stopped: 1103053999346329us idle: 880401us
- seq_num: 10000011 cur_dst_mac_offset: 0 cur_src_mac_offset: 0
- cur_saddr: 0x10a0a0a cur_daddr: 0x20b0a0a
- cur_udp_dst: 9 cur_udp_src: 9
+ queue_map_min: 0 queue_map_max: 0
+ dst_min: 192.168.81.2 dst_max:
+ src_min: src_max:
+ src_mac: 90:e2:ba:0a:56:b4 dst_mac: 00:1b:21:3c:9d:f8
+ udp_src_min: 9 udp_src_max: 109 udp_dst_min: 9 udp_dst_max: 9
+ src_mac_count: 0 dst_mac_count: 0
+ Flags: UDPSRC_RND NO_TIMESTAMP QUEUE_MAP_CPU
+ Current:
+ pkts-sofar: 100000 errors: 0
+ started: 623913381008us stopped: 623913396439us idle: 25us
+ seq_num: 100001 cur_dst_mac_offset: 0 cur_src_mac_offset: 0
+ cur_saddr: 192.168.8.3 cur_daddr: 192.168.81.2
+ cur_udp_dst: 9 cur_udp_src: 42
+ cur_queue_map: 0
flows: 0
-Result: OK: 13101142(c12220741+d880401) usec, 10000000 (60byte,0frags)
- 763292pps 390Mb/sec (390805504bps) errors: 39664
+ Result: OK: 15430(c15405+d25) usec, 100000 (60byte,0frags)
+ 6480562pps 3110Mb/sec (3110669760bps) errors: 0
-Configuring threads and devices
-================================
+
+Configuring devices
+===================
This is done via the /proc interface, and most easily done via pgset
as defined in the sample scripts.
@@ -126,7 +145,7 @@ Examples:
To select queue 1 of a given device,
use queue_map_min=1 and queue_map_max=1
- pgset "src_mac_count 1" Sets the number of MACs we'll range through.
+ pgset "src_mac_count 1" Sets the number of MACs we'll range through.
The 'minimum' MAC is what you set with srcmac.
pgset "dst_mac_count 1" Sets the number of MACs we'll range through.
@@ -145,6 +164,7 @@ Examples:
UDPCSUM,
IPSEC # IPsec encapsulation (needs CONFIG_XFRM)
NODE_ALLOC # node specific memory allocation
+ NO_TIMESTAMP # disable timestamping
pgset spi SPI_VALUE Set specific SA used to transform packet.
@@ -192,24 +212,43 @@ Examples:
pgset "rate 300M" set rate to 300 Mb/s
pgset "ratep 1000000" set rate to 1Mpps
+ pgset "xmit_mode netif_receive" RX inject into stack netif_receive_skb()
+ Works with "burst" but not with "clone_skb".
+ Default xmit_mode is "start_xmit".
+
Sample scripts
==============
-A collection of small tutorial scripts for pktgen is in the
-samples/pktgen directory:
+A collection of tutorial scripts and helpers for pktgen is in the
+samples/pktgen directory. The helper parameters.sh file support easy
+and consistant parameter parsing across the sample scripts.
+
+Usage example and help:
+ ./pktgen_sample01_simple.sh -i eth4 -m 00:1B:21:3C:9D:F8 -d 192.168.8.2
+
+Usage: ./pktgen_sample01_simple.sh [-vx] -i ethX
+ -i : ($DEV) output interface/device (required)
+ -s : ($PKT_SIZE) packet size
+ -d : ($DEST_IP) destination IP
+ -m : ($DST_MAC) destination MAC-addr
+ -t : ($THREADS) threads to start
+ -c : ($SKB_CLONE) SKB clones send before alloc new SKB
+ -b : ($BURST) HW level bursting of SKBs
+ -v : ($VERBOSE) verbose
+ -x : ($DEBUG) debug
+
+The global variables being set are also listed. E.g. the required
+interface/device parameter "-i" sets variable $DEV. Copy the
+pktgen_sampleXX scripts and modify them to fit your own needs.
+
+The old scripts:
-pktgen.conf-1-1 # 1 CPU 1 dev
pktgen.conf-1-2 # 1 CPU 2 dev
-pktgen.conf-2-1 # 2 CPU's 1 dev
-pktgen.conf-2-2 # 2 CPU's 2 dev
pktgen.conf-1-1-rdos # 1 CPU 1 dev w. route DoS
pktgen.conf-1-1-ip6 # 1 CPU 1 dev ipv6
pktgen.conf-1-1-ip6-rdos # 1 CPU 1 dev ipv6 w. route DoS
pktgen.conf-1-1-flows # 1 CPU 1 dev multiple flows.
-Run in shell: ./pktgen.conf-X-Y
-This does all the setup including sending.
-
Interrupt affinity
===================
@@ -217,6 +256,9 @@ Note that when adding devices to a specific CPU it is a good idea to
also assign /proc/irq/XX/smp_affinity so that the TX interrupts are bound
to the same CPU. This reduces cache bouncing when freeing skbs.
+Plus using the device flag QUEUE_MAP_CPU, which maps the SKBs TX queue
+to the running threads CPU (directly from smp_processor_id()).
+
Enable IPsec
============
Default IPsec transformation with ESP encapsulation plus transport mode
@@ -237,18 +279,19 @@ Current commands and configuration options
start
stop
+reset
** Thread commands:
add_device
rem_device_all
-max_before_softirq
** Device commands:
count
clone_skb
+burst
debug
frags
@@ -257,10 +300,17 @@ delay
src_mac_count
dst_mac_count
-pkt_size
+pkt_size
min_pkt_size
max_pkt_size
+queue_map_min
+queue_map_max
+skb_priority
+
+tos (ipv4)
+traffic_class (ipv6)
+
mpls
udp_src_min
@@ -269,6 +319,8 @@ udp_src_max
udp_dst_min
udp_dst_max
+node
+
flag
IPSRC_RND
IPDST_RND
@@ -287,6 +339,9 @@ flag
UDPCSUM
IPSEC
NODE_ALLOC
+ NO_TIMESTAMP
+
+spi (ipsec)
dst_min
dst_max
@@ -299,8 +354,10 @@ src_mac
clear_counters
-dst6
src6
+dst6
+dst6_max
+dst6_min
flows
flowlen
@@ -308,6 +365,17 @@ flowlen
rate
ratep
+xmit_mode <start_xmit|netif_receive>
+
+vlan_cfi
+vlan_id
+vlan_p
+
+svlan_cfi
+svlan_id
+svlan_p
+
+
References:
ftp://robur.slu.se/pub/Linux/net-development/pktgen-testing/
ftp://robur.slu.se/pub/Linux/net-development/pktgen-testing/examples/