summaryrefslogtreecommitdiffstats
path: root/kernel/Documentation/networking/dl2k.txt
diff options
context:
space:
mode:
authorYunhong Jiang <yunhong.jiang@intel.com>2015-08-04 12:17:53 -0700
committerYunhong Jiang <yunhong.jiang@intel.com>2015-08-04 15:44:42 -0700
commit9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch)
tree1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/Documentation/networking/dl2k.txt
parent98260f3884f4a202f9ca5eabed40b1354c489b29 (diff)
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/Documentation/networking/dl2k.txt')
-rw-r--r--kernel/Documentation/networking/dl2k.txt282
1 files changed, 282 insertions, 0 deletions
diff --git a/kernel/Documentation/networking/dl2k.txt b/kernel/Documentation/networking/dl2k.txt
new file mode 100644
index 000000000..cba74f7a3
--- /dev/null
+++ b/kernel/Documentation/networking/dl2k.txt
@@ -0,0 +1,282 @@
+
+ D-Link DL2000-based Gigabit Ethernet Adapter Installation
+ for Linux
+ May 23, 2002
+
+Contents
+========
+ - Compatibility List
+ - Quick Install
+ - Compiling the Driver
+ - Installing the Driver
+ - Option parameter
+ - Configuration Script Sample
+ - Troubleshooting
+
+
+Compatibility List
+=================
+Adapter Support:
+
+D-Link DGE-550T Gigabit Ethernet Adapter.
+D-Link DGE-550SX Gigabit Ethernet Adapter.
+D-Link DL2000-based Gigabit Ethernet Adapter.
+
+
+The driver support Linux kernel 2.4.7 later. We had tested it
+on the environments below.
+
+ . Red Hat v6.2 (update kernel to 2.4.7)
+ . Red Hat v7.0 (update kernel to 2.4.7)
+ . Red Hat v7.1 (kernel 2.4.7)
+ . Red Hat v7.2 (kernel 2.4.7-10)
+
+
+Quick Install
+=============
+Install linux driver as following command:
+
+1. make all
+2. insmod dl2k.ko
+3. ifconfig eth0 up 10.xxx.xxx.xxx netmask 255.0.0.0
+ ^^^^^^^^^^^^^^^\ ^^^^^^^^\
+ IP NETMASK
+Now eth0 should active, you can test it by "ping" or get more information by
+"ifconfig". If tested ok, continue the next step.
+
+4. cp dl2k.ko /lib/modules/`uname -r`/kernel/drivers/net
+5. Add the following line to /etc/modprobe.d/dl2k.conf:
+ alias eth0 dl2k
+6. Run depmod to updated module indexes.
+7. Run "netconfig" or "netconf" to create configuration script ifcfg-eth0
+ located at /etc/sysconfig/network-scripts or create it manually.
+ [see - Configuration Script Sample]
+8. Driver will automatically load and configure at next boot time.
+
+Compiling the Driver
+====================
+ In Linux, NIC drivers are most commonly configured as loadable modules.
+The approach of building a monolithic kernel has become obsolete. The driver
+can be compiled as part of a monolithic kernel, but is strongly discouraged.
+The remainder of this section assumes the driver is built as a loadable module.
+In the Linux environment, it is a good idea to rebuild the driver from the
+source instead of relying on a precompiled version. This approach provides
+better reliability since a precompiled driver might depend on libraries or
+kernel features that are not present in a given Linux installation.
+
+The 3 files necessary to build Linux device driver are dl2k.c, dl2k.h and
+Makefile. To compile, the Linux installation must include the gcc compiler,
+the kernel source, and the kernel headers. The Linux driver supports Linux
+Kernels 2.4.7. Copy the files to a directory and enter the following command
+to compile and link the driver:
+
+CD-ROM drive
+------------
+
+[root@XXX /] mkdir cdrom
+[root@XXX /] mount -r -t iso9660 -o conv=auto /dev/cdrom /cdrom
+[root@XXX /] cd root
+[root@XXX /root] mkdir dl2k
+[root@XXX /root] cd dl2k
+[root@XXX dl2k] cp /cdrom/linux/dl2k.tgz /root/dl2k
+[root@XXX dl2k] tar xfvz dl2k.tgz
+[root@XXX dl2k] make all
+
+Floppy disc drive
+-----------------
+
+[root@XXX /] cd root
+[root@XXX /root] mkdir dl2k
+[root@XXX /root] cd dl2k
+[root@XXX dl2k] mcopy a:/linux/dl2k.tgz /root/dl2k
+[root@XXX dl2k] tar xfvz dl2k.tgz
+[root@XXX dl2k] make all
+
+Installing the Driver
+=====================
+
+ Manual Installation
+ -------------------
+ Once the driver has been compiled, it must be loaded, enabled, and bound
+ to a protocol stack in order to establish network connectivity. To load a
+ module enter the command:
+
+ insmod dl2k.o
+
+ or
+
+ insmod dl2k.o <optional parameter> ; add parameter
+
+ ===============================================================
+ example: insmod dl2k.o media=100mbps_hd
+ or insmod dl2k.o media=3
+ or insmod dl2k.o media=3,2 ; for 2 cards
+ ===============================================================
+
+ Please reference the list of the command line parameters supported by
+ the Linux device driver below.
+
+ The insmod command only loads the driver and gives it a name of the form
+ eth0, eth1, etc. To bring the NIC into an operational state,
+ it is necessary to issue the following command:
+
+ ifconfig eth0 up
+
+ Finally, to bind the driver to the active protocol (e.g., TCP/IP with
+ Linux), enter the following command:
+
+ ifup eth0
+
+ Note that this is meaningful only if the system can find a configuration
+ script that contains the necessary network information. A sample will be
+ given in the next paragraph.
+
+ The commands to unload a driver are as follows:
+
+ ifdown eth0
+ ifconfig eth0 down
+ rmmod dl2k.o
+
+ The following are the commands to list the currently loaded modules and
+ to see the current network configuration.
+
+ lsmod
+ ifconfig
+
+
+ Automated Installation
+ ----------------------
+ This section describes how to install the driver such that it is
+ automatically loaded and configured at boot time. The following description
+ is based on a Red Hat 6.0/7.0 distribution, but it can easily be ported to
+ other distributions as well.
+
+ Red Hat v6.x/v7.x
+ -----------------
+ 1. Copy dl2k.o to the network modules directory, typically
+ /lib/modules/2.x.x-xx/net or /lib/modules/2.x.x/kernel/drivers/net.
+ 2. Locate the boot module configuration file, most commonly in the
+ /etc/modprobe.d/ directory. Add the following lines:
+
+ alias ethx dl2k
+ options dl2k <optional parameters>
+
+ where ethx will be eth0 if the NIC is the only ethernet adapter, eth1 if
+ one other ethernet adapter is installed, etc. Refer to the table in the
+ previous section for the list of optional parameters.
+ 3. Locate the network configuration scripts, normally the
+ /etc/sysconfig/network-scripts directory, and create a configuration
+ script named ifcfg-ethx that contains network information.
+ 4. Note that for most Linux distributions, Red Hat included, a configuration
+ utility with a graphical user interface is provided to perform steps 2
+ and 3 above.
+
+
+Parameter Description
+=====================
+You can install this driver without any additional parameter. However, if you
+are going to have extensive functions then it is necessary to set extra
+parameter. Below is a list of the command line parameters supported by the
+Linux device
+driver.
+
+mtu=packet_size - Specifies the maximum packet size. default
+ is 1500.
+
+media=media_type - Specifies the media type the NIC operates at.
+ autosense Autosensing active media.
+ 10mbps_hd 10Mbps half duplex.
+ 10mbps_fd 10Mbps full duplex.
+ 100mbps_hd 100Mbps half duplex.
+ 100mbps_fd 100Mbps full duplex.
+ 1000mbps_fd 1000Mbps full duplex.
+ 1000mbps_hd 1000Mbps half duplex.
+ 0 Autosensing active media.
+ 1 10Mbps half duplex.
+ 2 10Mbps full duplex.
+ 3 100Mbps half duplex.
+ 4 100Mbps full duplex.
+ 5 1000Mbps half duplex.
+ 6 1000Mbps full duplex.
+
+ By default, the NIC operates at autosense.
+ 1000mbps_fd and 1000mbps_hd types are only
+ available for fiber adapter.
+
+vlan=n - Specifies the VLAN ID. If vlan=0, the
+ Virtual Local Area Network (VLAN) function is
+ disable.
+
+jumbo=[0|1] - Specifies the jumbo frame support. If jumbo=1,
+ the NIC accept jumbo frames. By default, this
+ function is disabled.
+ Jumbo frame usually improve the performance
+ int gigabit.
+ This feature need jumbo frame compatible
+ remote.
+
+rx_coalesce=m - Number of rx frame handled each interrupt.
+rx_timeout=n - Rx DMA wait time for an interrupt.
+ If set rx_coalesce > 0, hardware only assert
+ an interrupt for m frames. Hardware won't
+ assert rx interrupt until m frames received or
+ reach timeout of n * 640 nano seconds.
+ Set proper rx_coalesce and rx_timeout can
+ reduce congestion collapse and overload which
+ has been a bottleneck for high speed network.
+
+ For example, rx_coalesce=10 rx_timeout=800.
+ that is, hardware assert only 1 interrupt
+ for 10 frames received or timeout of 512 us.
+
+tx_coalesce=n - Number of tx frame handled each interrupt.
+ Set n > 1 can reduce the interrupts
+ congestion usually lower performance of
+ high speed network card. Default is 16.
+
+tx_flow=[1|0] - Specifies the Tx flow control. If tx_flow=0,
+ the Tx flow control disable else driver
+ autodetect.
+rx_flow=[1|0] - Specifies the Rx flow control. If rx_flow=0,
+ the Rx flow control enable else driver
+ autodetect.
+
+
+Configuration Script Sample
+===========================
+Here is a sample of a simple configuration script:
+
+DEVICE=eth0
+USERCTL=no
+ONBOOT=yes
+POOTPROTO=none
+BROADCAST=207.200.5.255
+NETWORK=207.200.5.0
+NETMASK=255.255.255.0
+IPADDR=207.200.5.2
+
+
+Troubleshooting
+===============
+Q1. Source files contain ^ M behind every line.
+ Make sure all files are Unix file format (no LF). Try the following
+ shell command to convert files.
+
+ cat dl2k.c | col -b > dl2k.tmp
+ mv dl2k.tmp dl2k.c
+
+ OR
+
+ cat dl2k.c | tr -d "\r" > dl2k.tmp
+ mv dl2k.tmp dl2k.c
+
+Q2: Could not find header files (*.h) ?
+ To compile the driver, you need kernel header files. After
+ installing the kernel source, the header files are usually located in
+ /usr/src/linux/include, which is the default include directory configured
+ in Makefile. For some distributions, there is a copy of header files in
+ /usr/src/include/linux and /usr/src/include/asm, that you can change the
+ INCLUDEDIR in Makefile to /usr/include without installing kernel source.
+ Note that RH 7.0 didn't provide correct header files in /usr/include,
+ including those files will make a wrong version driver.
+