Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 167 insertions, 0 deletions

diff --git a/kernel/Documentation/locking/spinlocks.txt b/kernel/Documentation/locking/spinlocks.txt
new file mode 100644
index 000000000..ff35e40bd
--- /dev/null
+++ b/kernel/Documentation/locking/spinlocks.txt
@@ -0,0 +1,167 @@
+Lesson 1: Spin locks
+
+The most basic primitive for locking is spinlock.
+
+static DEFINE_SPINLOCK(xxx_lock);
+
+	unsigned long flags;
+
+	spin_lock_irqsave(&xxx_lock, flags);
+	... critical section here ..
+	spin_unlock_irqrestore(&xxx_lock, flags);
+
+The above is always safe. It will disable interrupts _locally_, but the
+spinlock itself will guarantee the global lock, so it will guarantee that
+there is only one thread-of-control within the region(s) protected by that
+lock. This works well even under UP also, so the code does _not_ need to
+worry about UP vs SMP issues: the spinlocks work correctly under both.
+
+   NOTE! Implications of spin_locks for memory are further described in:
+
+     Documentation/memory-barriers.txt
+       (5) LOCK operations.
+       (6) UNLOCK operations.
+
+The above is usually pretty simple (you usually need and want only one
+spinlock for most things - using more than one spinlock can make things a
+lot more complex and even slower and is usually worth it only for
+sequences that you _know_ need to be split up: avoid it at all cost if you
+aren't sure).
+
+This is really the only really hard part about spinlocks: once you start
+using spinlocks they tend to expand to areas you might not have noticed
+before, because you have to make sure the spinlocks correctly protect the
+shared data structures _everywhere_ they are used. The spinlocks are most
+easily added to places that are completely independent of other code (for
+example, internal driver data structures that nobody else ever touches).
+
+   NOTE! The spin-lock is safe only when you _also_ use the lock itself
+   to do locking across CPU's, which implies that EVERYTHING that
+   touches a shared variable has to agree about the spinlock they want
+   to use.
+
+----
+
+Lesson 2: reader-writer spinlocks.
+
+If your data accesses have a very natural pattern where you usually tend
+to mostly read from the shared variables, the reader-writer locks
+(rw_lock) versions of the spinlocks are sometimes useful. They allow multiple
+readers to be in the same critical region at once, but if somebody wants
+to change the variables it has to get an exclusive write lock.
+
+   NOTE! reader-writer locks require more atomic memory operations than
+   simple spinlocks.  Unless the reader critical section is long, you
+   are better off just using spinlocks.
+
+The routines look the same as above:
+
+   rwlock_t xxx_lock = __RW_LOCK_UNLOCKED(xxx_lock);
+
+	unsigned long flags;
+
+	read_lock_irqsave(&xxx_lock, flags);
+	.. critical section that only reads the info ...
+	read_unlock_irqrestore(&xxx_lock, flags);
+
+	write_lock_irqsave(&xxx_lock, flags);
+	.. read and write exclusive access to the info ...
+	write_unlock_irqrestore(&xxx_lock, flags);
+
+The above kind of lock may be useful for complex data structures like
+linked lists, especially searching for entries without changing the list
+itself.  The read lock allows many concurrent readers.  Anything that
+_changes_ the list will have to get the write lock.
+
+   NOTE! RCU is better for list traversal, but requires careful
+   attention to design detail (see Documentation/RCU/listRCU.txt).
+
+Also, you cannot "upgrade" a read-lock to a write-lock, so if you at _any_
+time need to do any changes (even if you don't do it every time), you have
+to get the write-lock at the very beginning.
+
+   NOTE! We are working hard to remove reader-writer spinlocks in most
+   cases, so please don't add a new one without consensus.  (Instead, see
+   Documentation/RCU/rcu.txt for complete information.)
+
+----
+
+Lesson 3: spinlocks revisited.
+
+The single spin-lock primitives above are by no means the only ones. They
+are the most safe ones, and the ones that work under all circumstances,
+but partly _because_ they are safe they are also fairly slow. They are slower
+than they'd need to be, because they do have to disable interrupts
+(which is just a single instruction on a x86, but it's an expensive one -
+and on other architectures it can be worse).
+
+If you have a case where you have to protect a data structure across
+several CPU's and you want to use spinlocks you can potentially use
+cheaper versions of the spinlocks. IFF you know that the spinlocks are
+never used in interrupt handlers, you can use the non-irq versions:
+
+	spin_lock(&lock);
+	...
+	spin_unlock(&lock);
+
+(and the equivalent read-write versions too, of course). The spinlock will
+guarantee the same kind of exclusive access, and it will be much faster.
+This is useful if you know that the data in question is only ever
+manipulated from a "process context", ie no interrupts involved.
+
+The reasons you mustn't use these versions if you have interrupts that
+play with the spinlock is that you can get deadlocks:
+
+	spin_lock(&lock);
+	...
+		<- interrupt comes in:
+			spin_lock(&lock);
+
+where an interrupt tries to lock an already locked variable. This is ok if
+the other interrupt happens on another CPU, but it is _not_ ok if the
+interrupt happens on the same CPU that already holds the lock, because the
+lock will obviously never be released (because the interrupt is waiting
+for the lock, and the lock-holder is interrupted by the interrupt and will
+not continue until the interrupt has been processed).
+
+(This is also the reason why the irq-versions of the spinlocks only need
+to disable the _local_ interrupts - it's ok to use spinlocks in interrupts
+on other CPU's, because an interrupt on another CPU doesn't interrupt the
+CPU that holds the lock, so the lock-holder can continue and eventually
+releases the lock).
+
+Note that you can be clever with read-write locks and interrupts. For
+example, if you know that the interrupt only ever gets a read-lock, then
+you can use a non-irq version of read locks everywhere - because they
+don't block on each other (and thus there is no dead-lock wrt interrupts.
+But when you do the write-lock, you have to use the irq-safe version.
+
+For an example of being clever with rw-locks, see the "waitqueue_lock"
+handling in kernel/sched/core.c - nothing ever _changes_ a wait-queue from
+within an interrupt, they only read the queue in order to know whom to
+wake up. So read-locks are safe (which is good: they are very common
+indeed), while write-locks need to protect themselves against interrupts.
+
+		Linus
+
+----
+
+Reference information:
+
+For dynamic initialization, use spin_lock_init() or rwlock_init() as
+appropriate:
+
+   spinlock_t xxx_lock;
+   rwlock_t xxx_rw_lock;
+
+   static int __init xxx_init(void)
+   {
+	spin_lock_init(&xxx_lock);
+	rwlock_init(&xxx_rw_lock);
+	...
+   }
+
+   module_init(xxx_init);
+
+For static initialization, use DEFINE_SPINLOCK() / DEFINE_RWLOCK() or
+__SPIN_LOCK_UNLOCKED() / __RW_LOCK_UNLOCKED() as appropriate.