These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 30 insertions, 0 deletions

diff --git a/kernel/Documentation/leds/leds-lp5523.txt b/kernel/Documentation/leds/leds-lp5523.txt
index 5b3e91d4a..0dbbd279c 100644
--- a/kernel/Documentation/leds/leds-lp5523.txt
+++ b/kernel/Documentation/leds/leds-lp5523.txt
@@ -49,6 +49,36 @@ There are two ways to run LED patterns.
 2) Firmware interface - LP55xx common interface
   For the details, please refer to 'firmware' section in leds-lp55xx.txt
 
+LP5523 has three master faders. If a channel is mapped to one of
+the master faders, its output is dimmed based on the value of the master
+fader.
+
+For example,
+
+  echo "123000123" > master_fader_leds
+
+creates the following channel-fader mappings:
+
+  channel 0,6 to master_fader1
+  channel 1,7 to master_fader2
+  channel 2,8 to master_fader3
+
+Then, to have 25% of the original output on channel 0,6:
+
+  echo 64 > master_fader1
+
+To have 0% of the original output (i.e. no output) channel 1,7:
+
+  echo 0 > master_fader2
+
+To have 100% of the original output (i.e. no dimming) on channel 2,8:
+
+  echo 255 > master_fader3
+
+To clear all master fader controls:
+
+  echo "000000000" > master_fader_leds
+
 Selftest uses always the current from the platform data.
 
 Each channel contains led current settings.