diff options
author | Yunhong Jiang <yunhong.jiang@intel.com> | 2015-08-04 12:17:53 -0700 |
---|---|---|
committer | Yunhong Jiang <yunhong.jiang@intel.com> | 2015-08-04 15:44:42 -0700 |
commit | 9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch) | |
tree | 1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/Documentation/isdn/README.fax | |
parent | 98260f3884f4a202f9ca5eabed40b1354c489b29 (diff) |
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base.
It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:
commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Sat Jul 25 12:13:34 2015 +0200
Prepare v4.1.3-rt3
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.
Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/Documentation/isdn/README.fax')
-rw-r--r-- | kernel/Documentation/isdn/README.fax | 45 |
1 files changed, 45 insertions, 0 deletions
diff --git a/kernel/Documentation/isdn/README.fax b/kernel/Documentation/isdn/README.fax new file mode 100644 index 000000000..5314958a8 --- /dev/null +++ b/kernel/Documentation/isdn/README.fax @@ -0,0 +1,45 @@ + +Fax with isdn4linux +=================== + +When enabled during kernel configuration, the tty emulator +of the ISDN subsystem is capable of the Fax Class 2 commands. + +This only makes sense under the following conditions : + +- You need the commands as dummy, because you are using + hylafax (with patch) for AVM capi. +- You want to use the fax capabilities of your isdn-card. + (supported cards are listed below) + + +NOTE: This implementation does *not* support fax with passive + ISDN-cards (known as softfax). The low-level driver of + the ISDN-card and/or the card itself must support this. + + +Supported ISDN-Cards +-------------------- + +Eicon DIVA Server BRI/PCI + - full support with both B-channels. + +Eicon DIVA Server 4BRI/PCI + - full support with all B-channels. + +Eicon DIVA Server PRI/PCI + - full support on amount of B-channels + depending on DSPs on board. + + + +The command set is known as Class 2 (not Class 2.0) and +can be activated by AT+FCLASS=2 + + +The interface between the link-level-module and the hardware-level driver +is described in the files INTERFACE.fax and INTERFACE. + +Armin +mac@melware.de + |