Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

5 files changed, 1052 insertions, 0 deletions

diff --git a/kernel/Documentation/hid/hid-sensor.txt b/kernel/Documentation/hid/hid-sensor.txt
new file mode 100644
index 000000000..b287752a3
--- /dev/null
+++ b/kernel/Documentation/hid/hid-sensor.txt
@@ -0,0 +1,224 @@
+
+HID Sensors Framework
+======================
+HID sensor framework provides necessary interfaces to implement sensor drivers,
+which are connected to a sensor hub. The sensor hub is a HID device and it provides
+a report descriptor conforming to HID 1.12 sensor usage tables.
+
+Description from the HID 1.12 "HID Sensor Usages" specification:
+"Standardization of HID usages for sensors would allow (but not require) sensor
+hardware vendors to provide a consistent Plug And Play interface at the USB boundary,
+thereby enabling some operating systems to incorporate common device drivers that
+could be reused between vendors, alleviating any need for the vendors to provide
+the drivers themselves."
+
+This specification describes many usage IDs, which describe the type of sensor
+and also the individual data fields. Each sensor can have variable number of
+data fields. The length and order is specified in the report descriptor. For
+example a part of report descriptor can look like:
+
+   INPUT(1)[INPUT]
+ ..
+    Field(2)
+      Physical(0020.0073)
+      Usage(1)
+        0020.045f
+      Logical Minimum(-32767)
+      Logical Maximum(32767)
+      Report Size(8)
+      Report Count(1)
+      Report Offset(16)
+      Flags(Variable Absolute)
+..
+..
+
+The report is indicating "sensor page (0x20)" contains an accelerometer-3D (0x73).
+This accelerometer-3D has some fields. Here for example field 2 is motion intensity
+(0x045f) with a logical minimum value of -32767 and logical maximum of 32767. The
+order of fields and length of each field is important as the input event raw
+data will use this format.
+
+
+Implementation
+=================
+
+This specification defines many different types of sensors with different sets of
+data fields. It is difficult to have a common input event to user space applications,
+for different sensors. For example an accelerometer can send X,Y and Z data, whereas
+an ambient light sensor can send illumination data.
+So the implementation has two parts:
+- Core hid driver
+- Individual sensor processing part (sensor drivers)
+
+Core driver
+-----------
+The core driver registers (hid-sensor-hub) registers as a HID driver. It parses
+report descriptors and identifies all the sensors present. It adds an MFD device
+with name HID-SENSOR-xxxx (where xxxx is usage id from the specification).
+For example
+HID-SENSOR-200073 is registered for an Accelerometer 3D driver.
+So if any driver with this name is inserted, then the probe routine for that
+function will be called. So an accelerometer processing driver can register
+with this name and will be probed if there is an accelerometer-3D detected.
+
+The core driver provides a set of APIs which can be used by the processing
+drivers to register and get events for that usage id. Also it provides parsing
+functions, which get and set each input/feature/output report.
+
+Individual sensor processing part (sensor drivers)
+-----------
+The processing driver will use an interface provided by the core driver to parse
+the report and get the indexes of the fields and also can get events. This driver
+can use IIO interface to use the standard ABI defined for a type of sensor.
+
+
+Core driver Interface
+=====================
+
+Callback structure:
+Each processing driver can use this structure to set some callbacks.
+	int (*suspend)(..): Callback when HID suspend is received
+	int (*resume)(..): Callback when HID resume is received
+	int (*capture_sample)(..): Capture a sample for one of its data fields
+	int (*send_event)(..): One complete event is received which can have
+                               multiple data fields.
+
+Registration functions:
+int sensor_hub_register_callback(struct hid_sensor_hub_device *hsdev,
+			u32 usage_id,
+			struct hid_sensor_hub_callbacks *usage_callback):
+
+Registers callbacks for an usage id. The callback functions are not allowed
+to sleep.
+
+
+int sensor_hub_remove_callback(struct hid_sensor_hub_device *hsdev,
+			u32 usage_id):
+
+Removes callbacks for an usage id.
+
+
+Parsing function:
+int sensor_hub_input_get_attribute_info(struct hid_sensor_hub_device *hsdev,
+			u8 type,
+			u32 usage_id, u32 attr_usage_id,
+			struct hid_sensor_hub_attribute_info *info);
+
+A processing driver can look for some field of interest and check if it exists
+in a report descriptor. If it exists it will store necessary information
+so that fields can be set or get individually.
+These indexes avoid searching every time and getting field index to get or set.
+
+
+Set Feature report
+int sensor_hub_set_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,
+			u32 field_index, s32 value);
+
+This interface is used to set a value for a field in feature report. For example
+if there is a field report_interval, which is parsed by a call to
+sensor_hub_input_get_attribute_info before, then it can directly set that individual
+field.
+
+
+int sensor_hub_get_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,
+			u32 field_index, s32 *value);
+
+This interface is used to get a value for a field in input report. For example
+if there is a field report_interval, which is parsed by a call to
+sensor_hub_input_get_attribute_info before, then it can directly get that individual
+field value.
+
+
+int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev,
+			u32 usage_id,
+			u32 attr_usage_id, u32 report_id);
+
+This is used to get a particular field value through input reports. For example
+accelerometer wants to poll X axis value, then it can call this function with
+the usage id of X axis. HID sensors can provide events, so this is not necessary
+to poll for any field. If there is some new sample, the core driver will call
+registered callback function to process the sample.
+
+
+----------
+
+HID Custom and generic Sensors
+
+HID Sensor specification defines two special sensor usage types. Since they
+don't represent a standard sensor, it is not possible to define using Linux IIO
+type interfaces.
+The purpose of these sensors is to extend the functionality or provide a
+way to obfuscate the data being communicated by a sensor. Without knowing the
+mapping between the data and its encapsulated form, it is difficult for
+an application/driver to determine what data is being communicated by the sensor.
+This allows some differentiating use cases, where vendor can provide applications.
+Some common use cases are debug other sensors or to provide some events like
+keyboard attached/detached or lid open/close.
+
+To allow application to utilize these sensors, here they are exported uses sysfs
+attribute groups, attributes and misc device interface.
+
+An example of this representation on sysfs:
+/sys/devices/pci0000:00/INT33C2:00/i2c-0/i2c-INT33D1:00/0018:8086:09FA.0001/HID-SENSOR-2000e1.6.auto$ tree -R
+.
+????????? enable_sensor
+????????? feature-0-200316
+??????? ????????? feature-0-200316-maximum
+??????? ????????? feature-0-200316-minimum
+??????? ????????? feature-0-200316-name
+??????? ????????? feature-0-200316-size
+??????? ????????? feature-0-200316-unit-expo
+??????? ????????? feature-0-200316-units
+??????? ????????? feature-0-200316-value
+????????? feature-1-200201
+??????? ????????? feature-1-200201-maximum
+??????? ????????? feature-1-200201-minimum
+??????? ????????? feature-1-200201-name
+??????? ????????? feature-1-200201-size
+??????? ????????? feature-1-200201-unit-expo
+??????? ????????? feature-1-200201-units
+??????? ????????? feature-1-200201-value
+????????? input-0-200201
+??????? ????????? input-0-200201-maximum
+??????? ????????? input-0-200201-minimum
+??????? ????????? input-0-200201-name
+??????? ????????? input-0-200201-size
+??????? ????????? input-0-200201-unit-expo
+??????? ????????? input-0-200201-units
+??????? ????????? input-0-200201-value
+????????? input-1-200202
+??????? ????????? input-1-200202-maximum
+??????? ????????? input-1-200202-minimum
+??????? ????????? input-1-200202-name
+??????? ????????? input-1-200202-size
+??????? ????????? input-1-200202-unit-expo
+??????? ????????? input-1-200202-units
+??????? ????????? input-1-200202-value
+
+Here there is a custom sensors with four fields, two feature and two inputs.
+Each field is represented by a set of attributes. All fields except the "value"
+are read only. The value field is a RW field.
+Example
+/sys/bus/platform/devices/HID-SENSOR-2000e1.6.auto/feature-0-200316$ grep -r . *
+feature-0-200316-maximum:6
+feature-0-200316-minimum:0
+feature-0-200316-name:property-reporting-state
+feature-0-200316-size:1
+feature-0-200316-unit-expo:0
+feature-0-200316-units:25
+feature-0-200316-value:1
+
+How to enable such sensor?
+By default sensor can be power gated. To enable sysfs attribute "enable" can be
+used.
+$ echo 1 > enable_sensor
+
+Once enabled and powered on, sensor can report value using HID reports.
+These reports are pushed using misc device interface in a FIFO order.
+/dev$ tree | grep HID-SENSOR-2000e1.6.auto
+??????? ????????? 10:53 -> ../HID-SENSOR-2000e1.6.auto
+????????? HID-SENSOR-2000e1.6.auto
+
+Each reports can be of variable length preceded by a header. This header
+consist of a 32 bit usage id, 64 bit time stamp and 32 bit length field of raw
+data.
diff --git a/kernel/Documentation/hid/hid-transport.txt b/kernel/Documentation/hid/hid-transport.txt
new file mode 100644
index 000000000..3dcba9fd4
--- /dev/null
+++ b/kernel/Documentation/hid/hid-transport.txt
@@ -0,0 +1,317 @@
+                          HID I/O Transport Drivers
+                         ===========================
+
+The HID subsystem is independent of the underlying transport driver. Initially,
+only USB was supported, but other specifications adopted the HID design and
+provided new transport drivers. The kernel includes at least support for USB,
+Bluetooth, I2C and user-space I/O drivers.
+
+1) HID Bus
+==========
+
+The HID subsystem is designed as a bus. Any I/O subsystem may provide HID
+devices and register them with the HID bus. HID core then loads generic device
+drivers on top of it. The transport drivers are responsible of raw data
+transport and device setup/management. HID core is responsible of
+report-parsing, report interpretation and the user-space API. Device specifics
+and quirks are handled by all layers depending on the quirk.
+
+ +-----------+  +-----------+            +-----------+  +-----------+
+ | Device #1 |  | Device #i |            | Device #j |  | Device #k |
+ +-----------+  +-----------+            +-----------+  +-----------+
+          \\      //                              \\      //
+        +------------+                          +------------+
+        | I/O Driver |                          | I/O Driver |
+        +------------+                          +------------+
+              ||                                      ||
+     +------------------+                    +------------------+
+     | Transport Driver |                    | Transport Driver |
+     +------------------+                    +------------------+
+                       \___                ___/
+                           \              /
+                          +----------------+
+                          |    HID Core    |
+                          +----------------+
+                           /  |        |  \
+                          /   |        |   \
+             ____________/    |        |    \_________________
+            /                 |        |                      \
+           /                  |        |                       \
+ +----------------+  +-----------+  +------------------+  +------------------+
+ | Generic Driver |  | MT Driver |  | Custom Driver #1 |  | Custom Driver #2 |
+ +----------------+  +-----------+  +------------------+  +------------------+
+
+Example Drivers:
+  I/O: USB, I2C, Bluetooth-l2cap
+  Transport: USB-HID, I2C-HID, BT-HIDP
+
+Everything below "HID Core" is simplified in this graph as it is only of
+interest to HID device drivers. Transport drivers do not need to know the
+specifics.
+
+1.1) Device Setup
+-----------------
+
+I/O drivers normally provide hotplug detection or device enumeration APIs to the
+transport drivers. Transport drivers use this to find any suitable HID device.
+They allocate HID device objects and register them with HID core. Transport
+drivers are not required to register themselves with HID core. HID core is never
+aware of which transport drivers are available and is not interested in it. It
+is only interested in devices.
+
+Transport drivers attach a constant "struct hid_ll_driver" object with each
+device. Once a device is registered with HID core, the callbacks provided via
+this struct are used by HID core to communicate with the device.
+
+Transport drivers are responsible of detecting device failures and unplugging.
+HID core will operate a device as long as it is registered regardless of any
+device failures. Once transport drivers detect unplug or failure events, they
+must unregister the device from HID core and HID core will stop using the
+provided callbacks.
+
+1.2) Transport Driver Requirements
+----------------------------------
+
+The terms "asynchronous" and "synchronous" in this document describe the
+transmission behavior regarding acknowledgements. An asynchronous channel must
+not perform any synchronous operations like waiting for acknowledgements or
+verifications. Generally, HID calls operating on asynchronous channels must be
+running in atomic-context just fine.
+On the other hand, synchronous channels can be implemented by the transport
+driver in whatever way they like. They might just be the same as asynchronous
+channels, but they can also provide acknowledgement reports, automatic
+retransmission on failure, etc. in a blocking manner. If such functionality is
+required on asynchronous channels, a transport-driver must implement that via
+its own worker threads.
+
+HID core requires transport drivers to follow a given design. A Transport
+driver must provide two bi-directional I/O channels to each HID device. These
+channels must not necessarily be bi-directional in the hardware itself. A
+transport driver might just provide 4 uni-directional channels. Or it might
+multiplex all four on a single physical channel. However, in this document we
+will describe them as two bi-directional channels as they have several
+properties in common.
+
+ - Interrupt Channel (intr): The intr channel is used for asynchronous data
+   reports. No management commands or data acknowledgements are sent on this
+   channel. Any unrequested incoming or outgoing data report must be sent on
+   this channel and is never acknowledged by the remote side. Devices usually
+   send their input events on this channel. Outgoing events are normally
+   not send via intr, except if high throughput is required.
+ - Control Channel (ctrl): The ctrl channel is used for synchronous requests and
+   device management. Unrequested data input events must not be sent on this
+   channel and are normally ignored. Instead, devices only send management
+   events or answers to host requests on this channel.
+   The control-channel is used for direct blocking queries to the device
+   independent of any events on the intr-channel.
+   Outgoing reports are usually sent on the ctrl channel via synchronous
+   SET_REPORT requests.
+
+Communication between devices and HID core is mostly done via HID reports. A
+report can be of one of three types:
+
+ - INPUT Report: Input reports provide data from device to host. This
+   data may include button events, axis events, battery status or more. This
+   data is generated by the device and sent to the host with or without
+   requiring explicit requests. Devices can choose to send data continuously or
+   only on change.
+ - OUTPUT Report: Output reports change device states. They are sent from host
+   to device and may include LED requests, rumble requests or more. Output
+   reports are never sent from device to host, but a host can retrieve their
+   current state.
+   Hosts may choose to send output reports either continuously or only on
+   change.
+ - FEATURE Report: Feature reports are used for specific static device features
+   and never reported spontaneously. A host can read and/or write them to access
+   data like battery-state or device-settings.
+   Feature reports are never sent without requests. A host must explicitly set
+   or retrieve a feature report. This also means, feature reports are never sent
+   on the intr channel as this channel is asynchronous.
+
+INPUT and OUTPUT reports can be sent as pure data reports on the intr channel.
+For INPUT reports this is the usual operational mode. But for OUTPUT reports,
+this is rarely done as OUTPUT reports are normally quite scarce. But devices are
+free to make excessive use of asynchronous OUTPUT reports (for instance, custom
+HID audio speakers make great use of it).
+
+Plain reports must not be sent on the ctrl channel, though. Instead, the ctrl
+channel provides synchronous GET/SET_REPORT requests. Plain reports are only
+allowed on the intr channel and are the only means of data there.
+
+ - GET_REPORT: A GET_REPORT request has a report ID as payload and is sent
+   from host to device. The device must answer with a data report for the
+   requested report ID on the ctrl channel as a synchronous acknowledgement.
+   Only one GET_REPORT request can be pending for each device. This restriction
+   is enforced by HID core as several transport drivers don't allow multiple
+   simultaneous GET_REPORT requests.
+   Note that data reports which are sent as answer to a GET_REPORT request are
+   not handled as generic device events. That is, if a device does not operate
+   in continuous data reporting mode, an answer to GET_REPORT does not replace
+   the raw data report on the intr channel on state change.
+   GET_REPORT is only used by custom HID device drivers to query device state.
+   Normally, HID core caches any device state so this request is not necessary
+   on devices that follow the HID specs except during device initialization to
+   retrieve the current state.
+   GET_REPORT requests can be sent for any of the 3 report types and shall
+   return the current report state of the device. However, OUTPUT reports as
+   payload may be blocked by the underlying transport driver if the
+   specification does not allow them.
+ - SET_REPORT: A SET_REPORT request has a report ID plus data as payload. It is
+   sent from host to device and a device must update it's current report state
+   according to the given data. Any of the 3 report types can be used. However,
+   INPUT reports as payload might be blocked by the underlying transport driver
+   if the specification does not allow them.
+   A device must answer with a synchronous acknowledgement. However, HID core
+   does not require transport drivers to forward this acknowledgement to HID
+   core.
+   Same as for GET_REPORT, only one SET_REPORT can be pending at a time. This
+   restriction is enforced by HID core as some transport drivers do not support
+   multiple synchronous SET_REPORT requests.
+
+Other ctrl-channel requests are supported by USB-HID but are not available
+(or deprecated) in most other transport level specifications:
+
+ - GET/SET_IDLE: Only used by USB-HID and I2C-HID.
+ - GET/SET_PROTOCOL: Not used by HID core.
+ - RESET: Used by I2C-HID, not hooked up in HID core.
+ - SET_POWER: Used by I2C-HID, not hooked up in HID core.
+
+2) HID API
+==========
+
+2.1) Initialization
+-------------------
+
+Transport drivers normally use the following procedure to register a new device
+with HID core:
+
+	struct hid_device *hid;
+	int ret;
+
+	hid = hid_allocate_device();
+	if (IS_ERR(hid)) {
+		ret = PTR_ERR(hid);
+		goto err_<...>;
+	}
+
+	strlcpy(hid->name, <device-name-src>, 127);
+	strlcpy(hid->phys, <device-phys-src>, 63);
+	strlcpy(hid->uniq, <device-uniq-src>, 63);
+
+	hid->ll_driver = &custom_ll_driver;
+	hid->bus = <device-bus>;
+	hid->vendor = <device-vendor>;
+	hid->product = <device-product>;
+	hid->version = <device-version>;
+	hid->country = <device-country>;
+	hid->dev.parent = <pointer-to-parent-device>;
+	hid->driver_data = <transport-driver-data-field>;
+
+	ret = hid_add_device(hid);
+	if (ret)
+		goto err_<...>;
+
+Once hid_add_device() is entered, HID core might use the callbacks provided in
+"custom_ll_driver". Note that fields like "country" can be ignored by underlying
+transport-drivers if not supported.
+
+To unregister a device, use:
+
+	hid_destroy_device(hid);
+
+Once hid_destroy_device() returns, HID core will no longer make use of any
+driver callbacks.
+
+2.2) hid_ll_driver operations
+-----------------------------
+
+The available HID callbacks are:
+ - int (*start) (struct hid_device *hdev)
+   Called from HID device drivers once they want to use the device. Transport
+   drivers can choose to setup their device in this callback. However, normally
+   devices are already set up before transport drivers register them to HID core
+   so this is mostly only used by USB-HID.
+
+ - void (*stop) (struct hid_device *hdev)
+   Called from HID device drivers once they are done with a device. Transport
+   drivers can free any buffers and deinitialize the device. But note that
+   ->start() might be called again if another HID device driver is loaded on the
+   device.
+   Transport drivers are free to ignore it and deinitialize devices after they
+   destroyed them via hid_destroy_device().
+
+ - int (*open) (struct hid_device *hdev)
+   Called from HID device drivers once they are interested in data reports.
+   Usually, while user-space didn't open any input API/etc., device drivers are
+   not interested in device data and transport drivers can put devices asleep.
+   However, once ->open() is called, transport drivers must be ready for I/O.
+   ->open() calls are nested for each client that opens the HID device.
+
+ - void (*close) (struct hid_device *hdev)
+   Called from HID device drivers after ->open() was called but they are no
+   longer interested in device reports. (Usually if user-space closed any input
+   devices of the driver).
+   Transport drivers can put devices asleep and terminate any I/O of all
+   ->open() calls have been followed by a ->close() call. However, ->start() may
+   be called again if the device driver is interested in input reports again.
+
+ - int (*parse) (struct hid_device *hdev)
+   Called once during device setup after ->start() has been called. Transport
+   drivers must read the HID report-descriptor from the device and tell HID core
+   about it via hid_parse_report().
+
+ - int (*power) (struct hid_device *hdev, int level)
+   Called by HID core to give PM hints to transport drivers. Usually this is
+   analogical to the ->open() and ->close() hints and redundant.
+
+ - void (*request) (struct hid_device *hdev, struct hid_report *report,
+                    int reqtype)
+   Send an HID request on the ctrl channel. "report" contains the report that
+   should be sent and "reqtype" the request type. Request-type can be
+   HID_REQ_SET_REPORT or HID_REQ_GET_REPORT.
+   This callback is optional. If not provided, HID core will assemble a raw
+   report following the HID specs and send it via the ->raw_request() callback.
+   The transport driver is free to implement this asynchronously.
+
+ - int (*wait) (struct hid_device *hdev)
+   Used by HID core before calling ->request() again. A transport driver can use
+   it to wait for any pending requests to complete if only one request is
+   allowed at a time.
+
+ - int (*raw_request) (struct hid_device *hdev, unsigned char reportnum,
+                       __u8 *buf, size_t count, unsigned char rtype,
+                       int reqtype)
+   Same as ->request() but provides the report as raw buffer. This request shall
+   be synchronous. A transport driver must not use ->wait() to complete such
+   requests. This request is mandatory and hid core will reject the device if
+   it is missing.
+
+ - int (*output_report) (struct hid_device *hdev, __u8 *buf, size_t len)
+   Send raw output report via intr channel. Used by some HID device drivers
+   which require high throughput for outgoing requests on the intr channel. This
+   must not cause SET_REPORT calls! This must be implemented as asynchronous
+   output report on the intr channel!
+
+ - int (*idle) (struct hid_device *hdev, int report, int idle, int reqtype)
+   Perform SET/GET_IDLE request. Only used by USB-HID, do not implement!
+
+2.3) Data Path
+--------------
+
+Transport drivers are responsible of reading data from I/O devices. They must
+handle any I/O-related state-tracking themselves. HID core does not implement
+protocol handshakes or other management commands which can be required by the
+given HID transport specification.
+
+Every raw data packet read from a device must be fed into HID core via
+hid_input_report(). You must specify the channel-type (intr or ctrl) and report
+type (input/output/feature). Under normal conditions, only input reports are
+provided via this API.
+
+Responses to GET_REPORT requests via ->request() must also be provided via this
+API. Responses to ->raw_request() are synchronous and must be intercepted by the
+transport driver and not passed to hid_input_report().
+Acknowledgements to SET_REPORT requests are not of interest to HID core.
+
+----------------------------------------------------
+Written 2013, David Herrmann <dh.herrmann@gmail.com>
diff --git a/kernel/Documentation/hid/hiddev.txt b/kernel/Documentation/hid/hiddev.txt
new file mode 100644
index 000000000..6e8c9f1d2
--- /dev/null
+++ b/kernel/Documentation/hid/hiddev.txt
@@ -0,0 +1,205 @@
+Care and feeding of your Human Interface Devices
+
+INTRODUCTION
+
+In addition to the normal input type HID devices, USB also uses the
+human interface device protocols for things that are not really human
+interfaces, but have similar sorts of communication needs. The two big
+examples for this are power devices (especially uninterruptable power
+supplies) and monitor control on higher end monitors.
+
+To support these disparate requirements, the Linux USB system provides
+HID events to two separate interfaces:
+* the input subsystem, which converts HID events into normal input
+device interfaces (such as keyboard, mouse and joystick) and a
+normalised event interface - see Documentation/input/input.txt
+* the hiddev interface, which provides fairly raw HID events
+
+The data flow for a HID event produced by a device is something like
+the following :
+
+ usb.c ---> hid-core.c  ----> hid-input.c ----> [keyboard/mouse/joystick/event]
+                         |
+                         |
+                          --> hiddev.c ----> POWER / MONITOR CONTROL 
+
+In addition, other subsystems (apart from USB) can potentially feed
+events into the input subsystem, but these have no effect on the hid
+device interface.
+
+USING THE HID DEVICE INTERFACE
+
+The hiddev interface is a char interface using the normal USB major,
+with the minor numbers starting at 96 and finishing at 111. Therefore,
+you need the following commands:
+mknod /dev/usb/hiddev0 c 180 96
+mknod /dev/usb/hiddev1 c 180 97
+mknod /dev/usb/hiddev2 c 180 98
+mknod /dev/usb/hiddev3 c 180 99
+mknod /dev/usb/hiddev4 c 180 100
+mknod /dev/usb/hiddev5 c 180 101
+mknod /dev/usb/hiddev6 c 180 102
+mknod /dev/usb/hiddev7 c 180 103
+mknod /dev/usb/hiddev8 c 180 104
+mknod /dev/usb/hiddev9 c 180 105
+mknod /dev/usb/hiddev10 c 180 106
+mknod /dev/usb/hiddev11 c 180 107
+mknod /dev/usb/hiddev12 c 180 108
+mknod /dev/usb/hiddev13 c 180 109
+mknod /dev/usb/hiddev14 c 180 110
+mknod /dev/usb/hiddev15 c 180 111
+
+So you point your hiddev compliant user-space program at the correct
+interface for your device, and it all just works.
+
+Assuming that you have a hiddev compliant user-space program, of
+course. If you need to write one, read on.
+
+
+THE HIDDEV API
+This description should be read in conjunction with the HID
+specification, freely available from http://www.usb.org, and
+conveniently linked of http://www.linux-usb.org.
+
+The hiddev API uses a read() interface, and a set of ioctl() calls.
+
+HID devices exchange data with the host computer using data
+bundles called "reports".  Each report is divided into "fields",
+each of which can have one or more "usages".  In the hid-core,
+each one of these usages has a single signed 32 bit value.
+
+read():
+This is the event interface.  When the HID device's state changes,
+it performs an interrupt transfer containing a report which contains
+the changed value.  The hid-core.c module parses the report, and
+returns to hiddev.c the individual usages that have changed within
+the report.  In its basic mode, the hiddev will make these individual
+usage changes available to the reader using a struct hiddev_event:
+
+       struct hiddev_event {
+           unsigned hid;
+           signed int value;
+       };
+
+containing the HID usage identifier for the status that changed, and
+the value that it was changed to. Note that the structure is defined
+within <linux/hiddev.h>, along with some other useful #defines and
+structures.  The HID usage identifier is a composite of the HID usage
+page shifted to the 16 high order bits ORed with the usage code.  The
+behavior of the read() function can be modified using the HIDIOCSFLAG
+ioctl() described below.
+
+
+ioctl(): 
+This is the control interface. There are a number of controls: 
+
+HIDIOCGVERSION - int (read)
+Gets the version code out of the hiddev driver.
+
+HIDIOCAPPLICATION - (none)
+This ioctl call returns the HID application usage associated with the
+hid device. The third argument to ioctl() specifies which application
+index to get. This is useful when the device has more than one
+application collection. If the index is invalid (greater or equal to
+the number of application collections this device has) the ioctl
+returns -1. You can find out beforehand how many application
+collections the device has from the num_applications field from the
+hiddev_devinfo structure. 
+
+HIDIOCGCOLLECTIONINFO - struct hiddev_collection_info (read/write)
+This returns a superset of the information above, providing not only
+application collections, but all the collections the device has.  It
+also returns the level the collection lives in the hierarchy.
+The user passes in a hiddev_collection_info struct with the index 
+field set to the index that should be returned.  The ioctl fills in 
+the other fields.  If the index is larger than the last collection 
+index, the ioctl returns -1 and sets errno to -EINVAL.
+
+HIDIOCGDEVINFO - struct hiddev_devinfo (read)
+Gets a hiddev_devinfo structure which describes the device.
+
+HIDIOCGSTRING - struct hiddev_string_descriptor (read/write)
+Gets a string descriptor from the device. The caller must fill in the
+"index" field to indicate which descriptor should be returned.
+
+HIDIOCINITREPORT - (none)
+Instructs the kernel to retrieve all input and feature report values
+from the device. At this point, all the usage structures will contain
+current values for the device, and will maintain it as the device
+changes.  Note that the use of this ioctl is unnecessary in general,
+since later kernels automatically initialize the reports from the
+device at attach time.
+
+HIDIOCGNAME - string (variable length)
+Gets the device name
+
+HIDIOCGREPORT - struct hiddev_report_info (write)
+Instructs the kernel to get a feature or input report from the device,
+in order to selectively update the usage structures (in contrast to
+INITREPORT).
+
+HIDIOCSREPORT - struct hiddev_report_info (write)
+Instructs the kernel to send a report to the device. This report can
+be filled in by the user through HIDIOCSUSAGE calls (below) to fill in
+individual usage values in the report before sending the report in full
+to the device. 
+
+HIDIOCGREPORTINFO - struct hiddev_report_info (read/write)
+Fills in a hiddev_report_info structure for the user. The report is
+looked up by type (input, output or feature) and id, so these fields
+must be filled in by the user. The ID can be absolute -- the actual
+report id as reported by the device -- or relative --
+HID_REPORT_ID_FIRST for the first report, and (HID_REPORT_ID_NEXT |
+report_id) for the next report after report_id. Without a-priori
+information about report ids, the right way to use this ioctl is to
+use the relative IDs above to enumerate the valid IDs. The ioctl
+returns non-zero when there is no more next ID. The real report ID is
+filled into the returned hiddev_report_info structure. 
+
+HIDIOCGFIELDINFO - struct hiddev_field_info (read/write)
+Returns the field information associated with a report in a
+hiddev_field_info structure. The user must fill in report_id and
+report_type in this structure, as above. The field_index should also
+be filled in, which should be a number from 0 and maxfield-1, as
+returned from a previous HIDIOCGREPORTINFO call. 
+
+HIDIOCGUCODE - struct hiddev_usage_ref (read/write)
+Returns the usage_code in a hiddev_usage_ref structure, given that
+given its report type, report id, field index, and index within the
+field have already been filled into the structure.
+
+HIDIOCGUSAGE - struct hiddev_usage_ref (read/write)
+Returns the value of a usage in a hiddev_usage_ref structure. The
+usage to be retrieved can be specified as above, or the user can
+choose to fill in the report_type field and specify the report_id as
+HID_REPORT_ID_UNKNOWN. In this case, the hiddev_usage_ref will be
+filled in with the report and field information associated with this
+usage if it is found. 
+
+HIDIOCSUSAGE - struct hiddev_usage_ref (write)
+Sets the value of a usage in an output report.  The user fills in
+the hiddev_usage_ref structure as above, but additionally fills in
+the value field.
+
+HIDIOGCOLLECTIONINDEX - struct hiddev_usage_ref (write)
+Returns the collection index associated with this usage.  This
+indicates where in the collection hierarchy this usage sits.
+
+HIDIOCGFLAG - int (read)
+HIDIOCSFLAG - int (write)
+These operations respectively inspect and replace the mode flags
+that influence the read() call above.  The flags are as follows:
+
+    HIDDEV_FLAG_UREF - read() calls will now return 
+        struct hiddev_usage_ref instead of struct hiddev_event.
+        This is a larger structure, but in situations where the
+        device has more than one usage in its reports with the
+        same usage code, this mode serves to resolve such
+        ambiguity.
+
+    HIDDEV_FLAG_REPORT - This flag can only be used in conjunction
+        with HIDDEV_FLAG_UREF.  With this flag set, when the device
+        sends a report, a struct hiddev_usage_ref will be returned
+        to read() filled in with the report_type and report_id, but 
+        with field_index set to FIELD_INDEX_NONE.  This serves as
+        additional notification when the device has sent a report.
diff --git a/kernel/Documentation/hid/hidraw.txt b/kernel/Documentation/hid/hidraw.txt
new file mode 100644
index 000000000..029e6cb9a
--- /dev/null
+++ b/kernel/Documentation/hid/hidraw.txt
@@ -0,0 +1,119 @@
+      HIDRAW - Raw Access to USB and Bluetooth Human Interface Devices
+     ==================================================================
+
+The hidraw driver provides a raw interface to USB and Bluetooth Human
+Interface Devices (HIDs).  It differs from hiddev in that reports sent and
+received are not parsed by the HID parser, but are sent to and received from
+the device unmodified.
+
+Hidraw should be used if the userspace application knows exactly how to
+communicate with the hardware device, and is able to construct the HID
+reports manually.  This is often the case when making userspace drivers for
+custom HID devices.
+
+Hidraw is also useful for communicating with non-conformant HID devices
+which send and receive data in a way that is inconsistent with their report
+descriptors.  Because hiddev parses reports which are sent and received
+through it, checking them against the device's report descriptor, such
+communication with these non-conformant devices is impossible using hiddev.
+Hidraw is the only alternative, short of writing a custom kernel driver, for
+these non-conformant devices.
+
+A benefit of hidraw is that its use by userspace applications is independent
+of the underlying hardware type.  Currently, Hidraw is implemented for USB
+and Bluetooth.  In the future, as new hardware bus types are developed which
+use the HID specification, hidraw will be expanded to add support for these
+new bus types.
+
+Hidraw uses a dynamic major number, meaning that udev should be relied on to
+create hidraw device nodes.  Udev will typically create the device nodes
+directly under /dev (eg: /dev/hidraw0).  As this location is distribution-
+and udev rule-dependent, applications should use libudev to locate hidraw
+devices attached to the system.  There is a tutorial on libudev with a
+working example at:
+	http://www.signal11.us/oss/udev/
+
+The HIDRAW API
+---------------
+
+read()
+-------
+read() will read a queued report received from the HID device. On USB
+devices, the reports read using read() are the reports sent from the device
+on the INTERRUPT IN endpoint.  By default, read() will block until there is
+a report available to be read.  read() can be made non-blocking, by passing
+the O_NONBLOCK flag to open(), or by setting the O_NONBLOCK flag using
+fcntl().
+
+On a device which uses numbered reports, the first byte of the returned data
+will be the report number; the report data follows, beginning in the second
+byte.  For devices which do not use numbered reports, the report data
+will begin at the first byte.
+
+write()
+--------
+The write() function will write a report to the device. For USB devices, if
+the device has an INTERRUPT OUT endpoint, the report will be sent on that
+endpoint. If it does not, the report will be sent over the control endpoint,
+using a SET_REPORT transfer.
+
+The first byte of the buffer passed to write() should be set to the report
+number.  If the device does not use numbered reports, the first byte should
+be set to 0. The report data itself should begin at the second byte.
+
+ioctl()
+--------
+Hidraw supports the following ioctls:
+
+HIDIOCGRDESCSIZE: Get Report Descriptor Size
+This ioctl will get the size of the device's report descriptor.
+
+HIDIOCGRDESC: Get Report Descriptor
+This ioctl returns the device's report descriptor using a
+hidraw_report_descriptor struct.  Make sure to set the size field of the
+hidraw_report_descriptor struct to the size returned from HIDIOCGRDESCSIZE.
+
+HIDIOCGRAWINFO: Get Raw Info
+This ioctl will return a hidraw_devinfo struct containing the bus type, the
+vendor ID (VID), and product ID (PID) of the device. The bus type can be one
+of:
+	BUS_USB
+	BUS_HIL
+	BUS_BLUETOOTH
+	BUS_VIRTUAL
+which are defined in linux/input.h.
+
+HIDIOCGRAWNAME(len): Get Raw Name
+This ioctl returns a string containing the vendor and product strings of
+the device.  The returned string is Unicode, UTF-8 encoded.
+
+HIDIOCGRAWPHYS(len): Get Physical Address
+This ioctl returns a string representing the physical address of the device.
+For USB devices, the string contains the physical path to the device (the
+USB controller, hubs, ports, etc).  For Bluetooth devices, the string
+contains the hardware (MAC) address of the device.
+
+HIDIOCSFEATURE(len): Send a Feature Report
+This ioctl will send a feature report to the device.  Per the HID
+specification, feature reports are always sent using the control endpoint.
+Set the first byte of the supplied buffer to the report number.  For devices
+which do not use numbered reports, set the first byte to 0. The report data
+begins in the second byte. Make sure to set len accordingly, to one more
+than the length of the report (to account for the report number).
+
+HIDIOCGFEATURE(len): Get a Feature Report
+This ioctl will request a feature report from the device using the control
+endpoint.  The first byte of the supplied buffer should be set to the report
+number of the requested report.  For devices which do not use numbered
+reports, set the first byte to 0.  The report will be returned starting at
+the first byte of the buffer (ie: the report number is not returned).
+
+Example
+---------
+In samples/, find hid-example.c, which shows examples of read(), write(),
+and all the ioctls for hidraw.  The code may be used by anyone for any
+purpose, and can serve as a starting point for developing applications using
+hidraw.
+
+Document by:
+	Alan Ott <alan@signal11.us>, Signal 11 Software
diff --git a/kernel/Documentation/hid/uhid.txt b/kernel/Documentation/hid/uhid.txt
new file mode 100644
index 000000000..c8656dd02
--- /dev/null
+++ b/kernel/Documentation/hid/uhid.txt
@@ -0,0 +1,187 @@
+      UHID - User-space I/O driver support for HID subsystem
+     ========================================================
+
+UHID allows user-space to implement HID transport drivers. Please see
+hid-transport.txt for an introduction into HID transport drivers. This document
+relies heavily on the definitions declared there.
+
+With UHID, a user-space transport driver can create kernel hid-devices for each
+device connected to the user-space controlled bus. The UHID API defines the I/O
+events provided from the kernel to user-space and vice versa.
+
+There is an example user-space application in ./samples/uhid/uhid-example.c
+
+The UHID API
+------------
+
+UHID is accessed through a character misc-device. The minor-number is allocated
+dynamically so you need to rely on udev (or similar) to create the device node.
+This is /dev/uhid by default.
+
+If a new device is detected by your HID I/O Driver and you want to register this
+device with the HID subsystem, then you need to open /dev/uhid once for each
+device you want to register. All further communication is done by read()'ing or
+write()'ing "struct uhid_event" objects. Non-blocking operations are supported
+by setting O_NONBLOCK.
+
+struct uhid_event {
+        __u32 type;
+        union {
+                struct uhid_create2_req create2;
+                struct uhid_output_req output;
+                struct uhid_input2_req input2;
+                ...
+        } u;
+};
+
+The "type" field contains the ID of the event. Depending on the ID different
+payloads are sent. You must not split a single event across multiple read()'s or
+multiple write()'s. A single event must always be sent as a whole. Furthermore,
+only a single event can be sent per read() or write(). Pending data is ignored.
+If you want to handle multiple events in a single syscall, then use vectored
+I/O with readv()/writev().
+The "type" field defines the payload. For each type, there is a
+payload-structure available in the union "u" (except for empty payloads). This
+payload contains management and/or device data.
+
+The first thing you should do is sending an UHID_CREATE2 event. This will
+register the device. UHID will respond with an UHID_START event. You can now
+start sending data to and reading data from UHID. However, unless UHID sends the
+UHID_OPEN event, the internally attached HID Device Driver has no user attached.
+That is, you might put your device asleep unless you receive the UHID_OPEN
+event. If you receive the UHID_OPEN event, you should start I/O. If the last
+user closes the HID device, you will receive an UHID_CLOSE event. This may be
+followed by an UHID_OPEN event again and so on. There is no need to perform
+reference-counting in user-space. That is, you will never receive multiple
+UHID_OPEN events without an UHID_CLOSE event. The HID subsystem performs
+ref-counting for you.
+You may decide to ignore UHID_OPEN/UHID_CLOSE, though. I/O is allowed even
+though the device may have no users.
+
+If you want to send data on the interrupt channel to the HID subsystem, you send
+an HID_INPUT2 event with your raw data payload. If the kernel wants to send data
+on the interrupt channel to the device, you will read an UHID_OUTPUT event.
+Data requests on the control channel are currently limited to GET_REPORT and
+SET_REPORT (no other data reports on the control channel are defined so far).
+Those requests are always synchronous. That means, the kernel sends
+UHID_GET_REPORT and UHID_SET_REPORT events and requires you to forward them to
+the device on the control channel. Once the device responds, you must forward
+the response via UHID_GET_REPORT_REPLY and UHID_SET_REPORT_REPLY to the kernel.
+The kernel blocks internal driver-execution during such round-trips (times out
+after a hard-coded period).
+
+If your device disconnects, you should send an UHID_DESTROY event. This will
+unregister the device. You can now send UHID_CREATE2 again to register a new
+device.
+If you close() the fd, the device is automatically unregistered and destroyed
+internally.
+
+write()
+-------
+write() allows you to modify the state of the device and feed input data into
+the kernel. The kernel will parse the event immediately and if the event ID is
+not supported, it will return -EOPNOTSUPP. If the payload is invalid, then
+-EINVAL is returned, otherwise, the amount of data that was read is returned and
+the request was handled successfully. O_NONBLOCK does not affect write() as
+writes are always handled immediately in a non-blocking fashion. Future requests
+might make use of O_NONBLOCK, though.
+
+  UHID_CREATE2:
+  This creates the internal HID device. No I/O is possible until you send this
+  event to the kernel. The payload is of type struct uhid_create2_req and
+  contains information about your device. You can start I/O now.
+
+  UHID_DESTROY:
+  This destroys the internal HID device. No further I/O will be accepted. There
+  may still be pending messages that you can receive with read() but no further
+  UHID_INPUT events can be sent to the kernel.
+  You can create a new device by sending UHID_CREATE2 again. There is no need to
+  reopen the character device.
+
+  UHID_INPUT2:
+  You must send UHID_CREATE2 before sending input to the kernel! This event
+  contains a data-payload. This is the raw data that you read from your device
+  on the interrupt channel. The kernel will parse the HID reports.
+
+  UHID_GET_REPORT_REPLY:
+  If you receive a UHID_GET_REPORT request you must answer with this request.
+  You  must copy the "id" field from the request into the answer. Set the "err"
+  field to 0 if no error occurred or to EIO if an I/O error occurred.
+  If "err" is 0 then you should fill the buffer of the answer with the results
+  of the GET_REPORT request and set "size" correspondingly.
+
+  UHID_SET_REPORT_REPLY:
+  This is the SET_REPORT equivalent of UHID_GET_REPORT_REPLY. Unlike GET_REPORT,
+  SET_REPORT never returns a data buffer, therefore, it's sufficient to set the
+  "id" and "err" fields correctly.
+
+read()
+------
+read() will return a queued output report. No reaction is required to any of
+them but you should handle them according to your needs.
+
+  UHID_START:
+  This is sent when the HID device is started. Consider this as an answer to
+  UHID_CREATE2. This is always the first event that is sent. Note that this
+  event might not be available immediately after write(UHID_CREATE2) returns.
+  Device drivers might required delayed setups.
+  This event contains a payload of type uhid_start_req. The "dev_flags" field
+  describes special behaviors of a device. The following flags are defined:
+      UHID_DEV_NUMBERED_FEATURE_REPORTS:
+      UHID_DEV_NUMBERED_OUTPUT_REPORTS:
+      UHID_DEV_NUMBERED_INPUT_REPORTS:
+          Each of these flags defines whether a given report-type uses numbered
+          reports. If numbered reports are used for a type, all messages from
+          the kernel already have the report-number as prefix. Otherwise, no
+          prefix is added by the kernel.
+          For messages sent by user-space to the kernel, you must adjust the
+          prefixes according to these flags.
+
+  UHID_STOP:
+  This is sent when the HID device is stopped. Consider this as an answer to
+  UHID_DESTROY.
+  If you didn't destroy your device via UHID_DESTROY, but the kernel sends an
+  UHID_STOP event, this should usually be ignored. It means that the kernel
+  reloaded/changed the device driver loaded on your HID device (or some other
+  maintenance actions happened).
+  You can usually ignored any UHID_STOP events safely.
+
+  UHID_OPEN:
+  This is sent when the HID device is opened. That is, the data that the HID
+  device provides is read by some other process. You may ignore this event but
+  it is useful for power-management. As long as you haven't received this event
+  there is actually no other process that reads your data so there is no need to
+  send UHID_INPUT2 events to the kernel.
+
+  UHID_CLOSE:
+  This is sent when there are no more processes which read the HID data. It is
+  the counterpart of UHID_OPEN and you may as well ignore this event.
+
+  UHID_OUTPUT:
+  This is sent if the HID device driver wants to send raw data to the I/O
+  device on the interrupt channel. You should read the payload and forward it to
+  the device. The payload is of type "struct uhid_data_req".
+  This may be received even though you haven't received UHID_OPEN, yet.
+
+  UHID_GET_REPORT:
+  This event is sent if the kernel driver wants to perform a GET_REPORT request
+  on the control channeld as described in the HID specs. The report-type and
+  report-number are available in the payload.
+  The kernel serializes GET_REPORT requests so there will never be two in
+  parallel. However, if you fail to respond with a UHID_GET_REPORT_REPLY, the
+  request might silently time out.
+  Once you read a GET_REPORT request, you shall forward it to the hid device and
+  remember the "id" field in the payload. Once your hid device responds to the
+  GET_REPORT (or if it fails), you must send a UHID_GET_REPORT_REPLY to the
+  kernel with the exact same "id" as in the request. If the request already
+  timed out, the kernel will ignore the response silently. The "id" field is
+  never re-used, so conflicts cannot happen.
+
+  UHID_SET_REPORT:
+  This is the SET_REPORT equivalent of UHID_GET_REPORT. On receipt, you shall
+  send a SET_REPORT request to your hid device. Once it replies, you must tell
+  the kernel about it via UHID_SET_REPORT_REPLY.
+  The same restrictions as for UHID_GET_REPORT apply.
+
+----------------------------------------------------
+Written 2012, David Herrmann <dh.herrmann@gmail.com>