Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 215 insertions, 0 deletions

diff --git a/kernel/Documentation/filesystems/ext3.txt b/kernel/Documentation/filesystems/ext3.txt
new file mode 100644
index 000000000..7ed0d17d6
--- /dev/null
+++ b/kernel/Documentation/filesystems/ext3.txt
@@ -0,0 +1,215 @@
+
+Ext3 Filesystem
+===============
+
+Ext3 was originally released in September 1999. Written by Stephen Tweedie
+for the 2.2 branch, and ported to 2.4 kernels by Peter Braam, Andreas Dilger,
+Andrew Morton, Alexander Viro, Ted Ts'o and Stephen Tweedie.
+
+Ext3 is the ext2 filesystem enhanced with journalling capabilities.
+
+Options
+=======
+
+When mounting an ext3 filesystem, the following option are accepted:
+(*) == default
+
+ro			Mount filesystem read only. Note that ext3 will replay
+			the journal (and thus write to the partition) even when
+			mounted "read only". Mount options "ro,noload" can be
+			used to prevent writes to the filesystem.
+
+journal=update		Update the ext3 file system's journal to the current
+			format.
+
+journal=inum		When a journal already exists, this option is ignored.
+			Otherwise, it specifies the number of the inode which
+			will represent the ext3 file system's journal file.
+
+journal_path=path
+journal_dev=devnum	When the external journal device's major/minor numbers
+			have changed, these options allow the user to specify
+			the new journal location.  The journal device is
+			identified through either its new major/minor numbers
+			encoded in devnum, or via a path to the device.
+
+norecovery		Don't load the journal on mounting. Note that this forces
+noload			mount of inconsistent filesystem, which can lead to
+			various problems.
+
+data=journal		All data are committed into the journal prior to being
+			written into the main file system.
+
+data=ordered	(*)	All data are forced directly out to the main file
+			system prior to its metadata being committed to the
+			journal.
+
+data=writeback		Data ordering is not preserved, data may be written
+			into the main file system after its metadata has been
+			committed to the journal.
+
+commit=nrsec	(*)	Ext3 can be told to sync all its data and metadata
+			every 'nrsec' seconds. The default value is 5 seconds.
+			This means that if you lose your power, you will lose
+			as much as the latest 5 seconds of work (your
+			filesystem will not be damaged though, thanks to the
+			journaling).  This default value (or any low value)
+			will hurt performance, but it's good for data-safety.
+			Setting it to 0 will have the same effect as leaving
+			it at the default (5 seconds).
+			Setting it to very large values will improve
+			performance.
+
+barrier=<0|1(*)>	This enables/disables the use of write barriers in
+barrier	(*)		the jbd code.  barrier=0 disables, barrier=1 enables.
+nobarrier		This also requires an IO stack which can support
+			barriers, and if jbd gets an error on a barrier
+			write, it will disable again with a warning.
+			Write barriers enforce proper on-disk ordering
+			of journal commits, making volatile disk write caches
+			safe to use, at some performance penalty.  If
+			your disks are battery-backed in one way or another,
+			disabling barriers may safely improve performance.
+			The mount options "barrier" and "nobarrier" can
+			also be used to enable or disable barriers, for
+			consistency with other ext3 mount options.
+
+user_xattr		Enables Extended User Attributes.  Additionally, you
+			need to have extended attribute support enabled in the
+			kernel configuration (CONFIG_EXT3_FS_XATTR).  See the
+			attr(5) manual page and http://acl.bestbits.at/ to
+			learn more about extended attributes.
+
+nouser_xattr		Disables Extended User Attributes.
+
+acl			Enables POSIX Access Control Lists support.
+			Additionally, you need to have ACL support enabled in
+			the kernel configuration (CONFIG_EXT3_FS_POSIX_ACL).
+			See the acl(5) manual page and http://acl.bestbits.at/
+			for more information.
+
+noacl			This option disables POSIX Access Control List
+			support.
+
+reservation
+
+noreservation
+
+bsddf 		(*)	Make 'df' act like BSD.
+minixdf			Make 'df' act like Minix.
+
+check=none		Don't do extra checking of bitmaps on mount.
+nocheck
+
+debug			Extra debugging information is sent to syslog.
+
+errors=remount-ro	Remount the filesystem read-only on an error.
+errors=continue		Keep going on a filesystem error.
+errors=panic		Panic and halt the machine if an error occurs.
+			(These mount options override the errors behavior
+			specified in the superblock, which can be
+			configured using tune2fs.)
+
+data_err=ignore(*)	Just print an error message if an error occurs
+			in a file data buffer in ordered mode.
+data_err=abort		Abort the journal if an error occurs in a file
+			data buffer in ordered mode.
+
+grpid			Give objects the same group ID as their creator.
+bsdgroups
+
+nogrpid		(*)	New objects have the group ID of their creator.
+sysvgroups
+
+resgid=n		The group ID which may use the reserved blocks.
+
+resuid=n		The user ID which may use the reserved blocks.
+
+sb=n			Use alternate superblock at this location.
+
+quota			These options are ignored by the filesystem. They
+noquota			are used only by quota tools to recognize volumes
+grpquota		where quota should be turned on. See documentation
+usrquota		in the quota-tools package for more details
+			(http://sourceforge.net/projects/linuxquota).
+
+jqfmt=<quota type>	These options tell filesystem details about quota
+usrjquota=<file>	so that quota information can be properly updated
+grpjquota=<file>	during journal replay. They replace the above
+			quota options. See documentation in the quota-tools
+			package for more details
+			(http://sourceforge.net/projects/linuxquota).
+
+Specification
+=============
+Ext3 shares all disk implementation with the ext2 filesystem, and adds
+transactions capabilities to ext2.  Journaling is done by the Journaling Block
+Device layer.
+
+Journaling Block Device layer
+-----------------------------
+The Journaling Block Device layer (JBD) isn't ext3 specific.  It was designed
+to add journaling capabilities to a block device.  The ext3 filesystem code
+will inform the JBD of modifications it is performing (called a transaction).
+The journal supports the transactions start and stop, and in case of a crash,
+the journal can replay the transactions to quickly put the partition back into
+a consistent state.
+
+Handles represent a single atomic update to a filesystem.  JBD can handle an
+external journal on a block device.
+
+Data Mode
+---------
+There are 3 different data modes:
+
+* writeback mode
+In data=writeback mode, ext3 does not journal data at all.  This mode provides
+a similar level of journaling as that of XFS, JFS, and ReiserFS in its default
+mode - metadata journaling.  A crash+recovery can cause incorrect data to
+appear in files which were written shortly before the crash.  This mode will
+typically provide the best ext3 performance.
+
+* ordered mode
+In data=ordered mode, ext3 only officially journals metadata, but it logically
+groups metadata and data blocks into a single unit called a transaction.  When
+it's time to write the new metadata out to disk, the associated data blocks
+are written first.  In general, this mode performs slightly slower than
+writeback but significantly faster than journal mode.
+
+* journal mode
+data=journal mode provides full data and metadata journaling.  All new data is
+written to the journal first, and then to its final location.
+In the event of a crash, the journal can be replayed, bringing both data and
+metadata into a consistent state.  This mode is the slowest except when data
+needs to be read from and written to disk at the same time where it
+outperforms all other modes.
+
+Compatibility
+-------------
+
+Ext2 partitions can be easily convert to ext3, with `tune2fs -j <dev>`.
+Ext3 is fully compatible with Ext2.  Ext3 partitions can easily be mounted as
+Ext2.
+
+
+External Tools
+==============
+See manual pages to learn more.
+
+tune2fs: 	create a ext3 journal on a ext2 partition with the -j flag.
+mke2fs: 	create a ext3 partition with the -j flag.
+debugfs: 	ext2 and ext3 file system debugger.
+ext2online:	online (mounted) ext2 and ext3 filesystem resizer
+
+
+References
+==========
+
+kernel source:	<file:fs/ext3/>
+		<file:fs/jbd/>
+
+programs: 	http://e2fsprogs.sourceforge.net/
+		http://ext2resize.sourceforge.net
+
+useful links:	http://www.ibm.com/developerworks/library/l-fs7/index.html
+        http://www.ibm.com/developerworks/library/l-fs8/index.html