Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 78 insertions, 0 deletions

diff --git a/kernel/Documentation/dvb/technisat.txt b/kernel/Documentation/dvb/technisat.txt
new file mode 100644
index 000000000..f0cc4f2d8
--- /dev/null
+++ b/kernel/Documentation/dvb/technisat.txt
@@ -0,0 +1,78 @@
+How to set up the Technisat/B2C2 Flexcop devices
+================================================
+
+1) Find out what device you have
+================================
+
+Important Notice: The driver does NOT support Technisat USB 2 devices!
+
+First start your linux box with a shipped kernel:
+lspci -vvv for a PCI device (lsusb -vvv for an USB device) will show you for example:
+02:0b.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip /
+ Technisat SkyStar2 DVB card (rev 02)
+
+dmesg | grep frontend may show you for example:
+DVB: registering frontend 0 (Conexant CX24123/CX24109)...
+
+2) Kernel compilation:
+======================
+
+If the Flexcop / Technisat is the only DVB / TV / Radio device in your box
+ get rid of unnecessary modules and check this one:
+"Multimedia support" => "Customise analog and hybrid tuner modules to build"
+In this directory uncheck every driver which is activated there
+ (except "Simple tuner support" for ATSC 3rd generation only -> see case 9 please).
+
+Then please activate:
+2a) Main module part:
+"Multimedia support" => "DVB/ATSC adapters"
+ => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters"
+
+a.) => "Technisat/B2C2 Air/Sky/Cable2PC PCI" (PCI card) or
+b.) => "Technisat/B2C2 Air/Sky/Cable2PC USB" (USB 1.1 adapter)
+ and for troubleshooting purposes:
+c.) => "Enable debug for the B2C2 FlexCop drivers"
+
+2b) Frontend / Tuner / Demodulator module part:
+"Multimedia support" => "DVB/ATSC adapters"
+ => "Customise the frontend modules to build" "Customise DVB frontends" =>
+
+1.) SkyStar DVB-S Revision 2.3:
+a.) => "Zarlink VP310/MT312/ZL10313 based"
+b.) => "Generic I2C PLL based tuners"
+
+2.) SkyStar DVB-S Revision 2.6:
+a.) => "ST STV0299 based"
+b.) => "Generic I2C PLL based tuners"
+
+3.) SkyStar DVB-S Revision 2.7:
+a.) => "Samsung S5H1420 based"
+b.) => "Integrant ITD1000 Zero IF tuner for DVB-S/DSS"
+c.) => "ISL6421 SEC controller"
+
+4.) SkyStar DVB-S Revision 2.8:
+a.) => "Conexant CX24123 based"
+b.) => "Conexant CX24113/CX24128 tuner for DVB-S/DSS"
+c.) => "ISL6421 SEC controller"
+
+5.) AirStar DVB-T card:
+a.) => "Zarlink MT352 based"
+b.) => "Generic I2C PLL based tuners"
+
+6.) CableStar DVB-C card:
+a.) => "ST STV0297 based"
+b.) => "Generic I2C PLL based tuners"
+
+7.) AirStar ATSC card 1st generation:
+a.) => "Broadcom BCM3510"
+
+8.) AirStar ATSC card 2nd generation:
+a.) => "NxtWave Communications NXT2002/NXT2004 based"
+b.) => "Generic I2C PLL based tuners"
+
+9.) AirStar ATSC card 3rd generation:
+a.) => "LG Electronics LGDT3302/LGDT3303 based"
+b.) "Multimedia support" => "Customise analog and hybrid tuner modules to build"
+ => "Simple tuner support"
+
+Author: Uwe Bugla <uwe.bugla@gmx.de> August 2009