Upgrade to 4.4.50-rt62

The current kernel is based on rt kernel v4.4.6-rt14. We will upgrade it
to 4.4.50-rt62.
The command to achieve it is:
a) Clone a git repo from
git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-stable-rt.git

b) Get the diff between this two changesets:
git diff 640eca2901f3435e616157b11379d3223a44b391
705619beeea1b0b48219a683fd1a901a86fdaf5e

where the two commits are:
[yjiang5@jnakajim-build linux-stable-rt]$ git show --oneline --name-only
640eca2901f3435e616157b11379d3223a44b391
640eca2901f3 v4.4.6-rt14
localversion-rt
[yjiang5@jnakajim-build linux-stable-rt]$ git show --oneline --name-only
705619beeea1b0b48219a683fd1a901a86fdaf5e
705619beeea1 Linux 4.4.50-rt62
localversion-rt

c) One patch has been backported thus revert the patch before applying.

 filterdiff -p1 -x scripts/package/Makefile
~/tmp/v4.4.6-rt14-4.4.50-rt62.diff  |patch -p1 --dry-run

Upstream status: backport

Change-Id: I244d57a32f6066e5a5b9915f9fbf99e7bbca6e01
Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com>

6 files changed, 22 insertions, 10 deletions

diff --git a/kernel/Documentation/devicetree/bindings/ata/ahci-platform.txt b/kernel/Documentation/devicetree/bindings/ata/ahci-platform.txt
index c2340eeeb..c000832a7 100644
--- a/kernel/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/kernel/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -30,6 +30,10 @@ Optional properties:
 - target-supply     : regulator for SATA target power
 - phys              : reference to the SATA PHY node
 - phy-names         : must be "sata-phy"
+- ports-implemented : Mask that indicates which ports that the HBA supports
+		      are available for software to use. Useful if PORTS_IMPL
+		      is not programmed by the BIOS, which is true with
+		      some embedded SOC's.
 
 Required properties when using sub-nodes:
 - #address-cells    : number of cells to encode an address
diff --git a/kernel/Documentation/devicetree/bindings/clock/imx31-clock.txt b/kernel/Documentation/devicetree/bindings/clock/imx31-clock.txt
index 19df842c6..8163d565f 100644
--- a/kernel/Documentation/devicetree/bindings/clock/imx31-clock.txt
+++ b/kernel/Documentation/devicetree/bindings/clock/imx31-clock.txt
@@ -77,7 +77,7 @@ Examples:
 clks: ccm@53f80000{
 	compatible = "fsl,imx31-ccm";
 	reg = <0x53f80000 0x4000>;
-	interrupts = <0 31 0x04 0 53 0x04>;
+	interrupts = <31>, <53>;
 	#clock-cells = <1>;
 };
 
diff --git a/kernel/Documentation/devicetree/bindings/clock/imx35-clock.txt b/kernel/Documentation/devicetree/bindings/clock/imx35-clock.txt
index a70356452..f49783213 100644
--- a/kernel/Documentation/devicetree/bindings/clock/imx35-clock.txt
+++ b/kernel/Documentation/devicetree/bindings/clock/imx35-clock.txt
@@ -94,6 +94,7 @@ clocks and IDs.
 	csi_sel			79
 	iim_gate		80
 	gpu2d_gate		81
+	ckli_gate		82
 
 Examples:
 
diff --git a/kernel/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt b/kernel/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
index a9a5fe19f..ec9d65682 100644
--- a/kernel/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
+++ b/kernel/Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
@@ -12,6 +12,11 @@ Required properties:
 - vref-supply: The regulator supply ADC reference voltage.
 - #io-channel-cells: Should be 1, see ../iio-bindings.txt
 
+Optional properties:
+- resets: Must contain an entry for each entry in reset-names if need support
+	  this option. See ../reset/reset.txt for details.
+- reset-names: Must include the name "saradc-apb".
+
 Example:
 	saradc: saradc@2006c000 {
 		compatible = "rockchip,saradc";
@@ -19,6 +24,8 @@ Example:
 		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		#io-channel-cells = <1>;
 		vref-supply = <&vcc18>;
 	};
diff --git a/kernel/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt b/kernel/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt
index 08a4a32c8..0326154c7 100644
--- a/kernel/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt
+++ b/kernel/Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt
@@ -134,12 +134,12 @@ mfio80		ddr_debug, mips_trace_data, mips_debug
 mfio81		dreq0, mips_trace_data, eth_debug
 mfio82		dreq1, mips_trace_data, eth_debug
 mfio83		mips_pll_lock, mips_trace_data, usb_debug
-mfio84		sys_pll_lock, mips_trace_data, usb_debug
-mfio85		wifi_pll_lock, mips_trace_data, sdhost_debug
-mfio86		bt_pll_lock, mips_trace_data, sdhost_debug
-mfio87		rpu_v_pll_lock, dreq2, socif_debug
-mfio88		rpu_l_pll_lock, dreq3, socif_debug
-mfio89		audio_pll_lock, dreq4, dreq5
+mfio84		audio_pll_lock, mips_trace_data, usb_debug
+mfio85		rpu_v_pll_lock, mips_trace_data, sdhost_debug
+mfio86		rpu_l_pll_lock, mips_trace_data, sdhost_debug
+mfio87		sys_pll_lock, dreq2, socif_debug
+mfio88		wifi_pll_lock, dreq3, socif_debug
+mfio89		bt_pll_lock, dreq4, dreq5
 tck
 trstn
 tdi
diff --git a/kernel/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt b/kernel/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
index d00bfd862..e0381c287 100644
--- a/kernel/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
+++ b/kernel/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
@@ -81,9 +81,9 @@ pm8916:
 	l14, l15, l16, l17, l18
 
 pm8941:
-	s1, s2, s3, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14,
-	l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3,
-	mvs1, mvs2
+	s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
+	l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3,
+	5vs1, 5vs2
 
 The content of each sub-node is defined by the standard binding for regulators -
 see regulator.txt - with additional custom properties described below: