These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 0 insertions, 211 deletions

diff --git a/kernel/Documentation/devicetree/bindings/video/ti,omap-dss.txt b/kernel/Documentation/devicetree/bindings/video/ti,omap-dss.txt
deleted file mode 100644
index e1ef29569..000000000
--- a/kernel/Documentation/devicetree/bindings/video/ti,omap-dss.txt
+++ /dev/null
@@ -1,211 +0,0 @@
-Texas Instruments OMAP Display Subsystem
-========================================
-
-Generic Description
--------------------
-
-This document is a generic description of the OMAP Display Subsystem bindings.
-Binding details for each OMAP SoC version are described in respective binding
-documentation.
-
-The OMAP Display Subsystem (DSS) hardware consists of DSS Core, DISPC module and
-a number of encoder modules. All DSS versions contain DSS Core and DISPC, but
-the encoder modules vary.
-
-The DSS Core is the parent of the other DSS modules, and manages clock routing,
-integration to the SoC, etc.
-
-DISPC is the display controller, which reads pixels from the memory and outputs
-a RGB pixel stream to encoders.
-
-The encoder modules encode the received RGB pixel stream to a video output like
-HDMI, MIPI DPI, etc.
-
-Video Ports
------------
-
-The DSS Core and the encoders have video port outputs. The structure of the
-video ports is described in Documentation/devicetree/bindings/graph.txt,
-and the properties for the ports and endpoints for each encoder are
-described in the SoC's DSS binding documentation.
-
-The video ports are used to describe the connections to external hardware, like
-panels or external encoders.
-
-Aliases
--------
-
-The board dts file may define aliases for displays to assign "displayX" style
-name for each display. If no aliases are defined, a semi-random number is used
-for the display.
-
-Example
--------
-
-A shortened example of the DSS description for OMAP4, with non-relevant parts
-removed, defined in omap4.dtsi:
-
-dss: dss@58000000 {
-	compatible = "ti,omap4-dss";
-	reg = <0x58000000 0x80>;
-	status = "disabled";
-	ti,hwmods = "dss_core";
-	clocks = <&dss_dss_clk>;
-	clock-names = "fck";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges;
-
-	dispc@58001000 {
-		compatible = "ti,omap4-dispc";
-		reg = <0x58001000 0x1000>;
-		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-		ti,hwmods = "dss_dispc";
-		clocks = <&dss_dss_clk>;
-		clock-names = "fck";
-	};
-
-	hdmi: encoder@58006000 {
-		compatible = "ti,omap4-hdmi";
-		reg = <0x58006000 0x200>,
-		      <0x58006200 0x100>,
-		      <0x58006300 0x100>,
-		      <0x58006400 0x1000>;
-		reg-names = "wp", "pll", "phy", "core";
-		interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-		status = "disabled";
-		ti,hwmods = "dss_hdmi";
-		clocks = <&dss_48mhz_clk>, <&dss_sys_clk>;
-		clock-names = "fck", "sys_clk";
-	};
-};
-
-A shortened example of the board description for OMAP4 Panda board, defined in
-omap4-panda.dts.
-
-The Panda board has a DVI and a HDMI connector, and the board contains a TFP410
-chip (MIPI DPI to DVI encoder) and a TPD12S015 chip (HDMI ESD protection & level
-shifter). The video pipelines for the connectors are formed as follows:
-
-DSS Core --(MIPI DPI)--> TFP410 --(DVI)--> DVI Connector
-OMAP HDMI --(HDMI)--> TPD12S015 --(HDMI)--> HDMI Connector
-
-/ {
-	aliases {
-		display0 = &dvi0;
-		display1 = &hdmi0;
-	};
-
-	tfp410: encoder@0 {
-		compatible = "ti,tfp410";
-		gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;	/* 0, power-down */
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tfp410_pins>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tfp410_in: endpoint@0 {
-					remote-endpoint = <&dpi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tfp410_out: endpoint@0 {
-					remote-endpoint = <&dvi_connector_in>;
-				};
-			};
-		};
-	};
-
-	dvi0: connector@0 {
-		compatible = "dvi-connector";
-		label = "dvi";
-
-		i2c-bus = <&i2c3>;
-
-		port {
-			dvi_connector_in: endpoint {
-				remote-endpoint = <&tfp410_out>;
-			};
-		};
-	};
-
-	tpd12s015: encoder@1 {
-		compatible = "ti,tpd12s015";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tpd12s015_pins>;
-
-		gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>,	/* 60, CT CP HPD */
-			<&gpio2 9 GPIO_ACTIVE_HIGH>,	/* 41, LS OE */
-			<&gpio2 31 GPIO_ACTIVE_HIGH>;	/* 63, HPD */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tpd12s015_in: endpoint@0 {
-					remote-endpoint = <&hdmi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tpd12s015_out: endpoint@0 {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-		};
-	};
-
-	hdmi0: connector@1 {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&tpd12s015_out>;
-			};
-		};
-	};
-};
-
-&dss {
-	status = "ok";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_dpi_pins>;
-
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&tfp410_in>;
-			data-lines = <24>;
-		};
-	};
-};
-
-&hdmi {
-	status = "ok";
-	vdda-supply = <&vdac>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&dss_hdmi_pins>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&tpd12s015_in>;
-		};
-	};
-};