These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 0 insertions, 29 deletions

diff --git a/kernel/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt b/kernel/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt
deleted file mode 100644
index 8bf2940f5..000000000
--- a/kernel/Documentation/devicetree/bindings/video/backlight/sky81452-backlight.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-SKY81452-backlight bindings
-
-Required properties:
-- compatible		: Must be "skyworks,sky81452-backlight"
-
-Optional properties:
-- name			: Name of backlight device. Default is 'lcd-backlight'.
-- gpios			: GPIO to use to EN pin.
-			See Documentation/devicetree/bindings/gpio/gpio.txt
-- led-sources		: List of enabled channels from 0 to 5.
-			See Documentation/devicetree/bindings/leds/common.txt
-- skyworks,ignore-pwm	: Ignore both PWM input
-- skyworks,dpwm-mode	: Enable DPWM dimming mode, otherwise Analog dimming.
-- skyworks,phase-shift	: Enable phase shift mode
-- skyworks,short-detection-threshold-volt
-			: It should be one of 4, 5, 6 and 7V.
-- skyworks,current-limit-mA
-			: It should be 2300mA or 2750mA.
-
-Example:
-
-	backlight {
-		compatible = "skyworks,sky81452-backlight";
-		name = "pwm-backlight";
-		led-sources = <0 1 2 5>;
-		skyworks,ignore-pwm;
-		skyworks,phase-shift;
-		skyworks,current-limit-mA = <2300>;
-	};