These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 58 insertions, 0 deletions

diff --git a/kernel/Documentation/devicetree/bindings/spi/spi-mt65xx.txt b/kernel/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
new file mode 100644
index 000000000..ce363c923
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/spi/spi-mt65xx.txt
@@ -0,0 +1,58 @@
+Binding for MTK SPI controller
+
+Required properties:
+- compatible: should be one of the following.
+    - mediatek,mt8173-spi: for mt8173 platforms
+    - mediatek,mt8135-spi: for mt8135 platforms
+    - mediatek,mt6589-spi: for mt6589 platforms
+
+- #address-cells: should be 1.
+
+- #size-cells: should be 0.
+
+- reg: Address and length of the register set for the device
+
+- interrupts: Should contain spi interrupt
+
+- clocks: phandles to input clocks.
+  The first should be one of the following. It's PLL.
+   -  <&clk26m>: specify parent clock 26MHZ.
+   -  <&topckgen CLK_TOP_SYSPLL3_D2>: specify parent clock 109MHZ.
+				      It's the default one.
+   -  <&topckgen CLK_TOP_SYSPLL4_D2>: specify parent clock 78MHZ.
+   -  <&topckgen CLK_TOP_UNIVPLL2_D4>: specify parent clock 104MHZ.
+   -  <&topckgen CLK_TOP_UNIVPLL1_D8>: specify parent clock 78MHZ.
+  The second should be <&topckgen CLK_TOP_SPI_SEL>. It's clock mux.
+  The third is <&pericfg CLK_PERI_SPI0>. It's clock gate.
+
+- clock-names: shall be "parent-clk" for the parent clock, "sel-clk" for the
+  muxes clock, and "spi-clk" for the clock gate.
+
+Optional properties:
+-cs-gpios: see spi-bus.txt, only required for MT8173.
+
+- mediatek,pad-select: specify which pins group(ck/mi/mo/cs) spi
+  controller used. This is a array, the element value should be 0~3,
+  only required for MT8173.
+    0: specify GPIO69,70,71,72 for spi pins.
+    1: specify GPIO102,103,104,105 for spi pins.
+    2: specify GPIO128,129,130,131 for spi pins.
+    3: specify GPIO5,6,7,8 for spi pins.
+
+Example:
+
+- SoC Specific Portion:
+spi: spi@1100a000 {
+	compatible = "mediatek,mt8173-spi";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0 0x1100a000 0 0x1000>;
+	interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>;
+	clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+		 <&topckgen CLK_TOP_SPI_SEL>,
+		 <&pericfg CLK_PERI_SPI0>;
+	clock-names = "parent-clk", "sel-clk", "spi-clk";
+	cs-gpios = <&pio 105 GPIO_ACTIVE_LOW>, <&pio 72 GPIO_ACTIVE_LOW>;
+	mediatek,pad-select = <1>, <0>;
+	status = "disabled";
+};