Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 25 insertions, 0 deletions

diff --git a/kernel/Documentation/devicetree/bindings/sound/wm8804.txt b/kernel/Documentation/devicetree/bindings/sound/wm8804.txt
new file mode 100644
index 000000000..6fd124b16
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/sound/wm8804.txt
@@ -0,0 +1,25 @@
+WM8804 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+  - compatible : "wlf,wm8804"
+
+  - reg : the I2C address of the device for I2C, the chip select
+          number for SPI.
+
+  - PVDD-supply, DVDD-supply : Power supplies for the device, as covered
+    in Documentation/devicetree/bindings/regulator/regulator.txt
+
+Optional properties:
+
+  - wlf,reset-gpio: A GPIO specifier for the GPIO controlling the reset pin
+
+Example:
+
+codec: wm8804@1a {
+	compatible = "wlf,wm8804";
+	reg = <0x1a>;
+};