These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 31 insertions, 1 deletions

diff --git a/kernel/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/kernel/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
index f316ce1f2..c57cbd657 100644
--- a/kernel/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
+++ b/kernel/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
@@ -4,9 +4,12 @@ Required properties:
 - compatible			: "renesas,rcar_sound-<soctype>", fallbacks
 				  "renesas,rcar_sound-gen1" if generation1, and
 				  "renesas,rcar_sound-gen2" if generation2
+				  "renesas,rcar_sound-gen3" if generation3
 				  Examples with soctypes are:
+				    - "renesas,rcar_sound-r8a7778" (R-Car M1A)
 				    - "renesas,rcar_sound-r8a7790" (R-Car H2)
 				    - "renesas,rcar_sound-r8a7791" (R-Car M2-W)
+				    - "renesas,rcar_sound-r8a7795" (R-Car H3)
 - reg				: Should contain the register physical address.
 				  required register is
 				   SRU/ADG/SSI      if generation1
@@ -17,12 +20,23 @@ Required properties:
 - rcar_sound,src		: Should contain SRC feature.
 				  The number of SRC subnode should be same as HW.
 				  see below for detail.
+- rcar_sound,ctu		: Should contain CTU feature.
+				  The number of CTU subnode should be same as HW.
+				  see below for detail.
+- rcar_sound,mix		: Should contain MIX feature.
+				  The number of MIX subnode should be same as HW.
+				  see below for detail.
 - rcar_sound,dvc		: Should contain DVC feature.
 				  The number of DVC subnode should be same as HW.
 				  see below for detail.
 - rcar_sound,dai		: DAI contents.
 				  The number of DAI subnode should be same as HW.
 				  see below for detail.
+- #sound-dai-cells		: it must be 0 if your system is using single DAI
+				  it must be 1 if your system is using multi  DAI
+- #clock-cells			: it must be 0 if your system has audio_clkout
+				  it must be 1 if your system has audio_clkout0/1/2/3
+- clock-frequency		: for all audio_clkout0/1/2/3
 
 SSI subnode properties:
 - interrupts			: Should contain SSI interrupt for PIO transfer
@@ -47,7 +61,7 @@ DAI subnode properties:
 
 Example:
 
-rcar_sound: rcar_sound@ec500000 {
+rcar_sound: sound@ec500000 {
 	#sound-dai-cells = <1>;
 	compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2";
 	reg =	<0 0xec500000 0 0x1000>, /* SCU */
@@ -89,6 +103,22 @@ rcar_sound: rcar_sound@ec500000 {
 		};
 	};
 
+	rcar_sound,mix {
+		mix0: mix@0 { };
+		mix1: mix@1 { };
+	};
+
+	rcar_sound,ctu {
+		ctu00: ctu@0 { };
+		ctu01: ctu@1 { };
+		ctu02: ctu@2 { };
+		ctu03: ctu@3 { };
+		ctu10: ctu@4 { };
+		ctu11: ctu@5 { };
+		ctu12: ctu@6 { };
+		ctu13: ctu@7 { };
+	};
+
 	rcar_sound,src {
 		src0: src@0 {
 			interrupts = <0 352 IRQ_TYPE_LEVEL_HIGH>;