summaryrefslogtreecommitdiffstats
path: root/kernel/Documentation/devicetree/bindings/reset
diff options
context:
space:
mode:
authorJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-11 10:41:07 +0300
committerJosé Pekkarinen <jose.pekkarinen@nokia.com>2016-04-13 08:17:18 +0300
commite09b41010ba33a20a87472ee821fa407a5b8da36 (patch)
treed10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/Documentation/devicetree/bindings/reset
parentf93b97fd65072de626c074dbe099a1fff05ce060 (diff)
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page. During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/Documentation/devicetree/bindings/reset')
-rw-r--r--kernel/Documentation/devicetree/bindings/reset/ath79-reset.txt20
-rw-r--r--kernel/Documentation/devicetree/bindings/reset/berlin,reset.txt23
-rw-r--r--kernel/Documentation/devicetree/bindings/reset/brcm,bcm63138-pmb.txt19
-rw-r--r--kernel/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt84
-rw-r--r--kernel/Documentation/devicetree/bindings/reset/socfpga-reset.txt2
-rw-r--r--kernel/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt2
-rw-r--r--kernel/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt4
-rw-r--r--kernel/Documentation/devicetree/bindings/reset/st,sti-softreset.txt4
-rw-r--r--kernel/Documentation/devicetree/bindings/reset/zynq-reset.txt68
9 files changed, 221 insertions, 5 deletions
diff --git a/kernel/Documentation/devicetree/bindings/reset/ath79-reset.txt b/kernel/Documentation/devicetree/bindings/reset/ath79-reset.txt
new file mode 100644
index 000000000..4c56330bf
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/reset/ath79-reset.txt
@@ -0,0 +1,20 @@
+Binding for Qualcomm Atheros AR7xxx/AR9XXX reset controller
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required Properties:
+- compatible: has to be "qca,<soctype>-reset", "qca,ar7100-reset"
+ as fallback
+- reg: Base address and size of the controllers memory area
+- #reset-cells : Specifies the number of cells needed to encode reset
+ line, should be 1
+
+Example:
+
+ reset-controller@1806001c {
+ compatible = "qca,ar9132-reset", "qca,ar7100-reset";
+ reg = <0x1806001c 0x4>;
+
+ #reset-cells = <1>;
+ };
diff --git a/kernel/Documentation/devicetree/bindings/reset/berlin,reset.txt b/kernel/Documentation/devicetree/bindings/reset/berlin,reset.txt
new file mode 100644
index 000000000..514fee098
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/reset/berlin,reset.txt
@@ -0,0 +1,23 @@
+Marvell Berlin reset controller
+===============================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+The reset controller node must be a sub-node of the chip controller
+node on Berlin SoCs.
+
+Required properties:
+- compatible: should be "marvell,berlin2-reset"
+- #reset-cells: must be set to 2
+
+Example:
+
+chip_rst: reset {
+ compatible = "marvell,berlin2-reset";
+ #reset-cells = <2>;
+};
+
+&usb_phy0 {
+ resets = <&chip_rst 0x104 12>;
+};
diff --git a/kernel/Documentation/devicetree/bindings/reset/brcm,bcm63138-pmb.txt b/kernel/Documentation/devicetree/bindings/reset/brcm,bcm63138-pmb.txt
new file mode 100644
index 000000000..a98872d27
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/reset/brcm,bcm63138-pmb.txt
@@ -0,0 +1,19 @@
+Broadcom BCM63138 Processor Monitor Bus binding
+===============================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Require properties:
+
+- compatible: must be "brcm,bcm63138-pmb"
+- reg: base register address and size for this bus controller
+- #reset-cells: must be 2 first cell is the address within the bus instance designated
+ by the phandle, and the second is the number of zones for this peripheral
+
+Example:
+ pmb0: reset-controller@4800c0 {
+ compatible = "brcm,bcm63138-pmb";
+ reg = <0x4800c0 0x10>;
+ #reset-cells = <2>;
+ };
diff --git a/kernel/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt b/kernel/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt
new file mode 100644
index 000000000..b4e96a278
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt
@@ -0,0 +1,84 @@
+NXP LPC1850 Reset Generation Unit (RGU)
+========================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "nxp,lpc1850-rgu"
+- reg: register base and length
+- clocks: phandle and clock specifier to RGU clocks
+- clock-names: should contain "delay" and "reg"
+- #reset-cells: should be 1
+
+See table below for valid peripheral reset numbers. Numbers not
+in the table below are either reserved or not applicable for
+normal operation.
+
+Reset Peripheral
+ 9 System control unit (SCU)
+ 12 ARM Cortex-M0 subsystem core (LPC43xx only)
+ 13 CPU core
+ 16 LCD controller
+ 17 USB0
+ 18 USB1
+ 19 DMA
+ 20 SDIO
+ 21 External memory controller (EMC)
+ 22 Ethernet
+ 25 Flash bank A
+ 27 EEPROM
+ 28 GPIO
+ 29 Flash bank B
+ 32 Timer0
+ 33 Timer1
+ 34 Timer2
+ 35 Timer3
+ 36 Repetitive Interrupt timer (RIT)
+ 37 State Configurable Timer (SCT)
+ 38 Motor control PWM (MCPWM)
+ 39 QEI
+ 40 ADC0
+ 41 ADC1
+ 42 DAC
+ 44 USART0
+ 45 UART1
+ 46 USART2
+ 47 USART3
+ 48 I2C0
+ 49 I2C1
+ 50 SSP0
+ 51 SSP1
+ 52 I2S0 and I2S1
+ 53 Serial Flash Interface (SPIFI)
+ 54 C_CAN1
+ 55 C_CAN0
+ 56 ARM Cortex-M0 application core (LPC4370 only)
+ 57 SGPIO (LPC43xx only)
+ 58 SPI (LPC43xx only)
+ 60 ADCHS (12-bit ADC) (LPC4370 only)
+
+Refer to NXP LPC18xx or LPC43xx user manual for more details about
+the reset signals and the connected block/peripheral.
+
+Reset provider example:
+rgu: reset-controller@40053000 {
+ compatible = "nxp,lpc1850-rgu";
+ reg = <0x40053000 0x1000>;
+ clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>;
+ clock-names = "delay", "reg";
+ #reset-cells = <1>;
+};
+
+Reset consumer example:
+mac: ethernet@40010000 {
+ compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac";
+ reg = <0x40010000 0x2000>;
+ interrupts = <5>;
+ interrupt-names = "macirq";
+ clocks = <&ccu1 CLK_CPU_ETHERNET>;
+ clock-names = "stmmaceth";
+ resets = <&rgu 22>;
+ reset-names = "stmmaceth";
+ status = "disabled";
+};
diff --git a/kernel/Documentation/devicetree/bindings/reset/socfpga-reset.txt b/kernel/Documentation/devicetree/bindings/reset/socfpga-reset.txt
index 32c1c8bfd..98c9f560e 100644
--- a/kernel/Documentation/devicetree/bindings/reset/socfpga-reset.txt
+++ b/kernel/Documentation/devicetree/bindings/reset/socfpga-reset.txt
@@ -3,6 +3,7 @@ Altera SOCFPGA Reset Manager
Required properties:
- compatible : "altr,rst-mgr"
- reg : Should contain 1 register ranges(address and length)
+- altr,modrst-offset : Should contain the offset of the first modrst register.
- #reset-cells: 1
Example:
@@ -10,4 +11,5 @@ Example:
#reset-cells = <1>;
compatible = "altr,rst-mgr";
reg = <0xffd05000 0x1000>;
+ altr,modrst-offset = <0x10>;
};
diff --git a/kernel/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt b/kernel/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt
index 54ae9f747..9ca27761f 100644
--- a/kernel/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt
+++ b/kernel/Documentation/devicetree/bindings/reset/st,sti-picophyreset.txt
@@ -39,4 +39,4 @@ Example:
};
Macro definitions for the supported reset channels can be found in:
-include/dt-bindings/reset-controller/stih407-resets.h
+include/dt-bindings/reset/stih407-resets.h
diff --git a/kernel/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt b/kernel/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
index 5ab26b7e9..1cfd21d1d 100644
--- a/kernel/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+++ b/kernel/Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
@@ -43,5 +43,5 @@ example:
Macro definitions for the supported reset channels can be found in:
-include/dt-bindings/reset-controller/stih415-resets.h
-include/dt-bindings/reset-controller/stih416-resets.h
+include/dt-bindings/reset/stih415-resets.h
+include/dt-bindings/reset/stih416-resets.h
diff --git a/kernel/Documentation/devicetree/bindings/reset/st,sti-softreset.txt b/kernel/Documentation/devicetree/bindings/reset/st,sti-softreset.txt
index a8d3d3c25..891a2fd85 100644
--- a/kernel/Documentation/devicetree/bindings/reset/st,sti-softreset.txt
+++ b/kernel/Documentation/devicetree/bindings/reset/st,sti-softreset.txt
@@ -42,5 +42,5 @@ example:
Macro definitions for the supported reset channels can be found in:
-include/dt-bindings/reset-controller/stih415-resets.h
-include/dt-bindings/reset-controller/stih416-resets.h
+include/dt-bindings/reset/stih415-resets.h
+include/dt-bindings/reset/stih416-resets.h
diff --git a/kernel/Documentation/devicetree/bindings/reset/zynq-reset.txt b/kernel/Documentation/devicetree/bindings/reset/zynq-reset.txt
new file mode 100644
index 000000000..5860120e3
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/reset/zynq-reset.txt
@@ -0,0 +1,68 @@
+Xilinx Zynq Reset Manager
+
+The Zynq AP-SoC has several different resets.
+
+See Chapter 26 of the Zynq TRM (UG585) for more information about Zynq resets.
+
+Required properties:
+- compatible: "xlnx,zynq-reset"
+- reg: SLCR offset and size taken via syscon <0x200 0x48>
+- syscon: <&slcr>
+ This should be a phandle to the Zynq's SLCR registers.
+- #reset-cells: Must be 1
+
+The Zynq Reset Manager needs to be a childnode of the SLCR.
+
+Example:
+ rstc: rstc@200 {
+ compatible = "xlnx,zynq-reset";
+ reg = <0x200 0x48>;
+ #reset-cells = <1>;
+ syscon = <&slcr>;
+ };
+
+Reset outputs:
+ 0 : soft reset
+ 32 : ddr reset
+ 64 : topsw reset
+ 96 : dmac reset
+ 128: usb0 reset
+ 129: usb1 reset
+ 160: gem0 reset
+ 161: gem1 reset
+ 164: gem0 rx reset
+ 165: gem1 rx reset
+ 166: gem0 ref reset
+ 167: gem1 ref reset
+ 192: sdio0 reset
+ 193: sdio1 reset
+ 196: sdio0 ref reset
+ 197: sdio1 ref reset
+ 224: spi0 reset
+ 225: spi1 reset
+ 226: spi0 ref reset
+ 227: spi1 ref reset
+ 256: can0 reset
+ 257: can1 reset
+ 258: can0 ref reset
+ 259: can1 ref reset
+ 288: i2c0 reset
+ 289: i2c1 reset
+ 320: uart0 reset
+ 321: uart1 reset
+ 322: uart0 ref reset
+ 323: uart1 ref reset
+ 352: gpio reset
+ 384: lqspi reset
+ 385: qspi ref reset
+ 416: smc reset
+ 417: smc ref reset
+ 448: ocm reset
+ 512: fpga0 out reset
+ 513: fpga1 out reset
+ 514: fpga2 out reset
+ 515: fpga3 out reset
+ 544: a9 reset 0
+ 545: a9 reset 1
+ 552: peri reset
+