diff options
author | José Pekkarinen <jose.pekkarinen@nokia.com> | 2016-04-11 10:41:07 +0300 |
---|---|---|
committer | José Pekkarinen <jose.pekkarinen@nokia.com> | 2016-04-13 08:17:18 +0300 |
commit | e09b41010ba33a20a87472ee821fa407a5b8da36 (patch) | |
tree | d10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/Documentation/devicetree/bindings/panel/sharp,lq101r1sx01.txt | |
parent | f93b97fd65072de626c074dbe099a1fff05ce060 (diff) |
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page.
During the rebasing, the following patch collided:
Force tick interrupt and get rid of softirq magic(I70131fb85).
Collisions have been removed because its logic was found on the
source already.
Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/Documentation/devicetree/bindings/panel/sharp,lq101r1sx01.txt')
-rw-r--r-- | kernel/Documentation/devicetree/bindings/panel/sharp,lq101r1sx01.txt | 49 |
1 files changed, 0 insertions, 49 deletions
diff --git a/kernel/Documentation/devicetree/bindings/panel/sharp,lq101r1sx01.txt b/kernel/Documentation/devicetree/bindings/panel/sharp,lq101r1sx01.txt deleted file mode 100644 index f522bb8e4..000000000 --- a/kernel/Documentation/devicetree/bindings/panel/sharp,lq101r1sx01.txt +++ /dev/null @@ -1,49 +0,0 @@ -Sharp Microelectronics 10.1" WQXGA TFT LCD panel - -This panel requires a dual-channel DSI host to operate. It supports two modes: -- left-right: each channel drives the left or right half of the screen -- even-odd: each channel drives the even or odd lines of the screen - -Each of the DSI channels controls a separate DSI peripheral. The peripheral -driven by the first link (DSI-LINK1), left or even, is considered the primary -peripheral and controls the device. The 'link2' property contains a phandle -to the peripheral driven by the second link (DSI-LINK2, right or odd). - -Note that in video mode the DSI-LINK1 interface always provides the left/even -pixels and DSI-LINK2 always provides the right/odd pixels. In command mode it -is possible to program either link to drive the left/even or right/odd pixels -but for the sake of consistency this binding assumes that the same assignment -is chosen as for video mode. - -Required properties: -- compatible: should be "sharp,lq101r1sx01" -- reg: DSI virtual channel of the peripheral - -Required properties (for DSI-LINK1 only): -- link2: phandle to the DSI peripheral on the secondary link. Note that the - presence of this property marks the containing node as DSI-LINK1. -- power-supply: phandle of the regulator that provides the supply voltage - -Optional properties (for DSI-LINK1 only): -- backlight: phandle of the backlight device attached to the panel - -Example: - - dsi@54300000 { - panel: panel@0 { - compatible = "sharp,lq101r1sx01"; - reg = <0>; - - link2 = <&secondary>; - - power-supply = <...>; - backlight = <...>; - }; - }; - - dsi@54400000 { - secondary: panel@0 { - compatible = "sharp,lq101r1sx01"; - reg = <0>; - }; - }; |