These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 0 insertions, 98 deletions

diff --git a/kernel/Documentation/devicetree/bindings/open-pic.txt b/kernel/Documentation/devicetree/bindings/open-pic.txt
deleted file mode 100644
index 909a902df..000000000
--- a/kernel/Documentation/devicetree/bindings/open-pic.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-* Open PIC Binding
-
-This binding specifies what properties must be available in the device tree
-representation of an Open PIC compliant interrupt controller.  This binding is
-based on the binding defined for Open PIC in [1] and is a superset of that
-binding.
-
-Required properties:
-
-  NOTE: Many of these descriptions were paraphrased here from [1] to aid
-        readability.
-
-    - compatible: Specifies the compatibility list for the PIC.  The type
-      shall be <string> and the value shall include "open-pic".
-
-    - reg: Specifies the base physical address(s) and size(s) of this
-      PIC's addressable register space.  The type shall be <prop-encoded-array>.
-
-    - interrupt-controller: The presence of this property identifies the node
-      as an Open PIC.  No property value shall be defined.
-
-    - #interrupt-cells: Specifies the number of cells needed to encode an
-      interrupt source.  The type shall be a <u32> and the value shall be 2.
-
-    - #address-cells: Specifies the number of cells needed to encode an
-      address.  The type shall be <u32> and the value shall be 0.  As such,
-      'interrupt-map' nodes do not have to specify a parent unit address.
-
-Optional properties:
-
-    - pic-no-reset: The presence of this property indicates that the PIC
-      shall not be reset during runtime initialization.  No property value shall
-      be defined.  The presence of this property also mandates that any
-      initialization related to interrupt sources shall be limited to sources
-      explicitly referenced in the device tree.
-
-* Interrupt Specifier Definition
-
-  Interrupt specifiers consists of 2 cells encoded as
-  follows:
-
-    - <1st-cell>: The interrupt-number that identifies the interrupt source.
-
-    - <2nd-cell>: The level-sense information, encoded as follows:
-                    0 = low-to-high edge triggered
-                    1 = active low level-sensitive
-                    2 = active high level-sensitive
-                    3 = high-to-low edge triggered
-
-* Examples
-
-Example 1:
-
-	/*
-	 * An Open PIC interrupt controller
-	 */
-	mpic: pic@40000 {
-		// This is an interrupt controller node.
-		interrupt-controller;
-
-		// No address cells so that 'interrupt-map' nodes which reference
-		// this Open PIC node do not need a parent address specifier.
-		#address-cells = <0>;
-
-		// Two cells to encode interrupt sources.
-		#interrupt-cells = <2>;
-
-		// Offset address of 0x40000 and size of 0x40000.
-		reg = <0x40000 0x40000>;
-
-		// Compatible with Open PIC.
-		compatible = "open-pic";
-
-		// The PIC shall not be reset.
-		pic-no-reset;
-	};
-
-Example 2:
-
-	/*
-	 * An interrupt generating device that is wired to an Open PIC.
-	 */
-	serial0: serial@4500 {
-		// Interrupt source '42' that is active high level-sensitive.
-		// Note that there are only two cells as specified in the interrupt
-		// parent's '#interrupt-cells' property.
-		interrupts = <42 2>;
-
-		// The interrupt controller that this device is wired to.
-		interrupt-parent = <&mpic>;
-	};
-
-* References
-
-[1] Power.org (TM) Standard for Embedded Power Architecture (TM) Platform
-    Requirements (ePAPR), Version 1.0, July 2008.
-    (http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf)
-