Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 68 insertions, 0 deletions

diff --git a/kernel/Documentation/devicetree/bindings/net/stmmac.txt b/kernel/Documentation/devicetree/bindings/net/stmmac.txt
new file mode 100644
index 000000000..f34fc3c81
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/net/stmmac.txt
@@ -0,0 +1,68 @@
+* STMicroelectronics 10/100/1000 Ethernet driver (GMAC)
+
+Required properties:
+- compatible: Should be "snps,dwmac-<ip_version>" "snps,dwmac"
+	For backwards compatibility: "st,spear600-gmac" is also supported.
+- reg: Address and length of the register set for the device
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- interrupts: Should contain the STMMAC interrupts
+- interrupt-names: Should contain the interrupt names "macirq"
+  "eth_wake_irq" if this interrupt is supported in the "interrupts"
+  property
+- phy-mode: See ethernet.txt file in the same directory.
+- snps,reset-gpio 	gpio number for phy reset.
+- snps,reset-active-low boolean flag to indicate if phy reset is active low.
+- snps,reset-delays-us  is triplet of delays
+	The 1st cell is reset pre-delay in micro seconds.
+	The 2nd cell is reset pulse in micro seconds.
+	The 3rd cell is reset post-delay in micro seconds.
+- snps,pbl		Programmable Burst Length
+- snps,fixed-burst	Program the DMA to use the fixed burst mode
+- snps,mixed-burst	Program the DMA to use the mixed burst mode
+- snps,force_thresh_dma_mode	Force DMA to use the threshold mode for
+				both tx and rx
+- snps,force_sf_dma_mode	Force DMA to use the Store and Forward
+				mode for both tx and rx. This flag is
+				ignored if force_thresh_dma_mode is set.
+- snps,multicast-filter-bins:	Number of multicast filter hash bins
+				supported by this device instance
+- snps,perfect-filter-entries:	Number of perfect filter entries supported
+				by this device instance
+
+Optional properties:
+- resets: Should contain a phandle to the STMMAC reset signal, if any
+- reset-names: Should contain the reset signal name "stmmaceth", if a
+	reset phandle is given
+- max-frame-size: See ethernet.txt file in the same directory
+- clocks: If present, the first clock should be the GMAC main clock and
+  the second clock should be peripheral's register interface clock. Further
+  clocks may be specified in derived bindings.
+- clock-names: One name for each entry in the clocks property, the
+  first one should be "stmmaceth" and the second one should be "pclk".
+- clk_ptp_ref: this is the PTP reference clock; in case of the PTP is
+  available this clock is used for programming the Timestamp Addend Register.
+  If not passed then the system clock will be used and this is fine on some
+  platforms.
+- snps,burst_len: The AXI burst lenth value of the AXI BUS MODE register.
+- tx-fifo-depth: See ethernet.txt file in the same directory
+- rx-fifo-depth: See ethernet.txt file in the same directory
+
+Examples:
+
+	gmac0: ethernet@e0800000 {
+		compatible = "st,spear600-gmac";
+		reg = <0xe0800000 0x8000>;
+		interrupt-parent = <&vic1>;
+		interrupts = <24 23>;
+		interrupt-names = "macirq", "eth_wake_irq";
+		mac-address = [000000000000]; /* Filled in by U-Boot */
+		max-frame-size = <3800>;
+		phy-mode = "gmii";
+		snps,multicast-filter-bins = <256>;
+		snps,perfect-filter-entries = <128>;
+		rx-fifo-depth = <16384>;
+		tx-fifo-depth = <16384>;
+		clocks = <&clock>;
+		clock-names = "stmmaceth";
+	};