summaryrefslogtreecommitdiffstats
path: root/kernel/Documentation/devicetree/bindings/misc
diff options
context:
space:
mode:
authorYunhong Jiang <yunhong.jiang@intel.com>2015-08-04 12:17:53 -0700
committerYunhong Jiang <yunhong.jiang@intel.com>2015-08-04 15:44:42 -0700
commit9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch)
tree1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/Documentation/devicetree/bindings/misc
parent98260f3884f4a202f9ca5eabed40b1354c489b29 (diff)
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/Documentation/devicetree/bindings/misc')
-rw-r--r--kernel/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt17
-rw-r--r--kernel/Documentation/devicetree/bindings/misc/arm-charlcd.txt18
-rw-r--r--kernel/Documentation/devicetree/bindings/misc/at25.txt35
-rw-r--r--kernel/Documentation/devicetree/bindings/misc/atmel-ssc.txt49
-rw-r--r--kernel/Documentation/devicetree/bindings/misc/bmp085.txt24
-rw-r--r--kernel/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt15
-rw-r--r--kernel/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt40
-rw-r--r--kernel/Documentation/devicetree/bindings/misc/ifm-csi.txt41
-rw-r--r--kernel/Documentation/devicetree/bindings/misc/lis302.txt119
-rw-r--r--kernel/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt12
-rw-r--r--kernel/Documentation/devicetree/bindings/misc/sram.txt51
-rw-r--r--kernel/Documentation/devicetree/bindings/misc/ti,dac7512.txt20
12 files changed, 441 insertions, 0 deletions
diff --git a/kernel/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt b/kernel/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt
new file mode 100644
index 000000000..fabdf64a5
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt
@@ -0,0 +1,17 @@
+Allwinner sunxi-sid
+
+Required properties:
+- compatible: "allwinner,sun4i-a10-sid" or "allwinner,sun7i-a20-sid"
+- reg: Should contain registers location and length
+
+Example for sun4i:
+ sid@01c23800 {
+ compatible = "allwinner,sun4i-a10-sid";
+ reg = <0x01c23800 0x10>
+ };
+
+Example for sun7i:
+ sid@01c23800 {
+ compatible = "allwinner,sun7i-a20-sid";
+ reg = <0x01c23800 0x200>
+ };
diff --git a/kernel/Documentation/devicetree/bindings/misc/arm-charlcd.txt b/kernel/Documentation/devicetree/bindings/misc/arm-charlcd.txt
new file mode 100644
index 000000000..e28e2aac4
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/misc/arm-charlcd.txt
@@ -0,0 +1,18 @@
+ARM Versatile Character LCD
+-----------------------------------------------------
+This binding defines the character LCD interface found on ARM Versatile AB
+and PB reference platforms.
+
+Required properties:
+- compatible : "arm,versatile-clcd"
+- reg : Location and size of character LCD registers
+
+Optional properties:
+- interrupts - single interrupt for character LCD. The character LCD can
+ operate in polled mode without an interrupt.
+
+Example:
+ lcd@10008000 {
+ compatible = "arm,versatile-lcd";
+ reg = <0x10008000 0x1000>;
+ };
diff --git a/kernel/Documentation/devicetree/bindings/misc/at25.txt b/kernel/Documentation/devicetree/bindings/misc/at25.txt
new file mode 100644
index 000000000..1d3447165
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/misc/at25.txt
@@ -0,0 +1,35 @@
+EEPROMs (SPI) compatible with Atmel at25.
+
+Required properties:
+- compatible : "atmel,at25".
+- reg : chip select number
+- spi-max-frequency : max spi frequency to use
+- pagesize : size of the eeprom page
+- size : total eeprom size in bytes
+- address-width : number of address bits (one of 8, 16, or 24)
+
+Optional properties:
+- spi-cpha : SPI shifted clock phase, as per spi-bus bindings.
+- spi-cpol : SPI inverse clock polarity, as per spi-bus bindings.
+- read-only : this parameter-less property disables writes to the eeprom
+
+Obsolete legacy properties are can be used in place of "size", "pagesize",
+"address-width", and "read-only":
+- at25,byte-len : total eeprom size in bytes
+- at25,addr-mode : addr-mode flags, as defined in include/linux/spi/eeprom.h
+- at25,page-size : size of the eeprom page
+
+Additional compatible properties are also allowed.
+
+Example:
+ at25@0 {
+ compatible = "atmel,at25", "st,m95256";
+ reg = <0>
+ spi-max-frequency = <5000000>;
+ spi-cpha;
+ spi-cpol;
+
+ pagesize = <64>;
+ size = <32768>;
+ address-width = <16>;
+ };
diff --git a/kernel/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/kernel/Documentation/devicetree/bindings/misc/atmel-ssc.txt
new file mode 100644
index 000000000..efc98ea1f
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/misc/atmel-ssc.txt
@@ -0,0 +1,49 @@
+* Atmel SSC driver.
+
+Required properties:
+- compatible: "atmel,at91rm9200-ssc" or "atmel,at91sam9g45-ssc"
+ - atmel,at91rm9200-ssc: support pdc transfer
+ - atmel,at91sam9g45-ssc: support dma transfer
+- reg: Should contain SSC registers location and length
+- interrupts: Should contain SSC interrupt
+- clock-names: tuple listing input clock names.
+ Required elements: "pclk"
+- clocks: phandles to input clocks.
+
+
+Required properties for devices compatible with "atmel,at91sam9g45-ssc":
+- dmas: DMA specifier, consisting of a phandle to DMA controller node,
+ the memory interface and SSC DMA channel ID (for tx and rx).
+ See Documentation/devicetree/bindings/dma/atmel-dma.txt for details.
+- dma-names: Must be "tx", "rx".
+
+Optional properties:
+ - atmel,clk-from-rk-pin: bool property.
+ - When SSC works in slave mode, according to the hardware design, the
+ clock can get from TK pin, and also can get from RK pin. So, add
+ this parameter to choose where the clock from.
+ - By default the clock is from TK pin, if the clock from RK pin, this
+ property is needed.
+
+Examples:
+- PDC transfer:
+ssc0: ssc@fffbc000 {
+ compatible = "atmel,at91rm9200-ssc";
+ reg = <0xfffbc000 0x4000>;
+ interrupts = <14 4 5>;
+ clocks = <&ssc0_clk>;
+ clock-names = "pclk";
+};
+
+- DMA transfer:
+ssc0: ssc@f0010000 {
+ compatible = "atmel,at91sam9g45-ssc";
+ reg = <0xf0010000 0x4000>;
+ interrupts = <28 4 5>;
+ dmas = <&dma0 1 13>,
+ <&dma0 1 14>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+ status = "disabled";
+};
diff --git a/kernel/Documentation/devicetree/bindings/misc/bmp085.txt b/kernel/Documentation/devicetree/bindings/misc/bmp085.txt
new file mode 100644
index 000000000..d7a6deb6b
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/misc/bmp085.txt
@@ -0,0 +1,24 @@
+BMP085/BMP18x digital pressure sensors
+
+Required properties:
+- compatible: bosch,bmp085
+
+Optional properties:
+- chip-id: configurable chip id for non-default chip revisions
+- temp-measurement-period: temperature measurement period (milliseconds)
+- default-oversampling: default oversampling value to be used at startup,
+ value range is 0-3 with rising sensitivity.
+- interrupt-parent: should be the phandle for the interrupt controller
+- interrupts: interrupt mapping for IRQ
+
+Example:
+
+pressure@77 {
+ compatible = "bosch,bmp085";
+ reg = <0x77>;
+ chip-id = <10>;
+ temp-measurement-period = <100>;
+ default-oversampling = <2>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+};
diff --git a/kernel/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt b/kernel/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt
new file mode 100644
index 000000000..6c9f176f3
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/misc/brcm,kona-smc.txt
@@ -0,0 +1,15 @@
+Broadcom Secure Monitor Bounce buffer
+-----------------------------------------------------
+This binding defines the location of the bounce buffer
+used for non-secure to secure communications.
+
+Required properties:
+- compatible : "brcm,kona-smc"
+- DEPRECATED: compatible : "bcm,kona-smc"
+- reg : Location and size of bounce buffer
+
+Example:
+ smc@0x3404c000 {
+ compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
+ reg = <0x3404c000 0x400>; //1 KiB in SRAM
+ };
diff --git a/kernel/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt b/kernel/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
new file mode 100644
index 000000000..c7a26ca8d
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
@@ -0,0 +1,40 @@
+* Freescale Management Complex
+
+The Freescale Management Complex (fsl-mc) is a hardware resource
+manager that manages specialized hardware objects used in
+network-oriented packet processing applications. After the fsl-mc
+block is enabled, pools of hardware resources are available, such as
+queues, buffer pools, I/O interfaces. These resources are building
+blocks that can be used to create functional hardware objects/devices
+such as network interfaces, crypto accelerator instances, L2 switches,
+etc.
+
+Required properties:
+
+ - compatible
+ Value type: <string>
+ Definition: Must be "fsl,qoriq-mc". A Freescale Management Complex
+ compatible with this binding must have Block Revision
+ Registers BRR1 and BRR2 at offset 0x0BF8 and 0x0BFC in
+ the MC control register region.
+
+ - reg
+ Value type: <prop-encoded-array>
+ Definition: A standard property. Specifies one or two regions
+ defining the MC's registers:
+
+ -the first region is the command portal for the
+ this machine and must always be present
+
+ -the second region is the MC control registers. This
+ region may not be present in some scenarios, such
+ as in the device tree presented to a virtual machine.
+
+Example:
+
+ fsl_mc: fsl-mc@80c000000 {
+ compatible = "fsl,qoriq-mc";
+ reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
+ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
+ };
+
diff --git a/kernel/Documentation/devicetree/bindings/misc/ifm-csi.txt b/kernel/Documentation/devicetree/bindings/misc/ifm-csi.txt
new file mode 100644
index 000000000..5bdfffb0b
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/misc/ifm-csi.txt
@@ -0,0 +1,41 @@
+IFM camera sensor interface on mpc5200 LocalPlus bus
+
+Required properties:
+- compatible: "ifm,o2d-csi"
+- reg: specifies sensor chip select number and associated address range
+- interrupts: external interrupt line number and interrupt sense mode
+ of the interrupt line signaling frame valid events
+- gpios: three gpio-specifiers for "capture", "reset" and "master enable"
+ GPIOs (strictly in this order).
+- ifm,csi-clk-handle: the phandle to a node in the DT describing the sensor
+ clock generator. This node is usually a general purpose timer controller.
+- ifm,csi-addr-bus-width: address bus width (valid values are 16, 24, 25)
+- ifm,csi-data-bus-width: data bus width (valid values are 8 and 16)
+- ifm,csi-wait-cycles: sensor bus wait cycles
+
+Optional properties:
+- ifm,csi-byte-swap: if this property is present, the byte swapping on
+ the bus will be enabled.
+
+Example:
+
+ csi@3,0 {
+ compatible = "ifm,o2d-csi";
+ reg = <3 0 0x00100000>; /* CS 3, 1 MiB range */
+ interrupts = <1 1 2>; /* IRQ1, edge falling */
+
+ ifm,csi-clk-handle = <&timer7>;
+ gpios = <&gpio_simple 23 0 /* image_capture */
+ &gpio_simple 26 0 /* image_reset */
+ &gpio_simple 29 0>; /* image_master_en */
+
+ ifm,csi-addr-bus-width = <24>;
+ ifm,csi-data-bus-width = <8>;
+ ifm,csi-wait-cycles = <0>;
+ };
+
+The base address of the used chip select is specified in the
+ranges property of the parent localbus node, for example:
+
+ ranges = <0 0 0xff000000 0x01000000
+ 3 0 0xe3000000 0x00100000>;
diff --git a/kernel/Documentation/devicetree/bindings/misc/lis302.txt b/kernel/Documentation/devicetree/bindings/misc/lis302.txt
new file mode 100644
index 000000000..2a19bff96
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/misc/lis302.txt
@@ -0,0 +1,119 @@
+LIS302 accelerometer devicetree bindings
+
+This device is matched via its bus drivers, and has a number of properties
+that apply in on the generic device (independent from the bus).
+
+
+Required properties for the SPI bindings:
+ - compatible: should be set to "st,lis3lv02d_spi"
+ - reg: the chipselect index
+ - spi-max-frequency: maximal bus speed, should be set to 1000000 unless
+ constrained by external circuitry
+ - interrupts: the interrupt generated by the device
+
+Required properties for the I2C bindings:
+ - compatible: should be set to "st,lis3lv02d"
+ - reg: i2c slave address
+ - Vdd-supply: The input supply for Vdd
+ - Vdd_IO-supply: The input supply for Vdd_IO
+
+
+Optional properties for all bus drivers:
+
+ - st,click-single-{x,y,z}: if present, tells the device to issue an
+ interrupt on single click events on the
+ x/y/z axis.
+ - st,click-double-{x,y,z}: if present, tells the device to issue an
+ interrupt on double click events on the
+ x/y/z axis.
+ - st,click-thresh-{x,y,z}: set the x/y/z axis threshold
+ - st,click-click-time-limit: click time limit, from 0 to 127.5msec
+ with step of 0.5 msec
+ - st,click-latency: click latency, from 0 to 255 msec with
+ step of 1 msec.
+ - st,click-window: click window, from 0 to 255 msec with
+ step of 1 msec.
+ - st,irq{1,2}-disable: disable IRQ 1/2
+ - st,irq{1,2}-ff-wu-1: raise IRQ 1/2 on FF_WU_1 condition
+ - st,irq{1,2}-ff-wu-2: raise IRQ 1/2 on FF_WU_2 condition
+ - st,irq{1,2}-data-ready: raise IRQ 1/2 on data ready contition
+ - st,irq{1,2}-click: raise IRQ 1/2 on click condition
+ - st,irq-open-drain: consider IRQ lines open-drain
+ - st,irq-active-low: make IRQ lines active low
+ - st,wu-duration-1: duration register for Free-Fall/Wake-Up
+ interrupt 1
+ - st,wu-duration-2: duration register for Free-Fall/Wake-Up
+ interrupt 2
+ - st,wakeup-{x,y,z}-{lo,hi}: set wakeup condition on x/y/z axis for
+ upper/lower limit
+ - st,wakeup-threshold: set wakeup threshold
+ - st,wakeup2-{x,y,z}-{lo,hi}: set wakeup condition on x/y/z axis for
+ upper/lower limit for second wakeup
+ engine.
+ - st,wakeup2-threshold: set wakeup threshold for second wakeup
+ engine.
+ - st,highpass-cutoff-hz=: 1, 2, 4 or 8 for 1Hz, 2Hz, 4Hz or 8Hz of
+ highpass cut-off frequency
+ - st,hipass{1,2}-disable: disable highpass 1/2.
+ - st,default-rate=: set the default rate
+ - st,axis-{x,y,z}=: set the axis to map to the three coordinates.
+ Negative values can be used for inverted axis.
+ - st,{min,max}-limit-{x,y,z} set the min/max limits for x/y/z axis
+ (used by self-test)
+
+
+Example for a SPI device node:
+
+ lis302@0 {
+ compatible = "st,lis302dl-spi";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ interrupt-parent = <&gpio>;
+ interrupts = <104 0>;
+
+ st,click-single-x;
+ st,click-single-y;
+ st,click-single-z;
+ st,click-thresh-x = <10>;
+ st,click-thresh-y = <10>;
+ st,click-thresh-z = <10>;
+ st,irq1-click;
+ st,irq2-click;
+ st,wakeup-x-lo;
+ st,wakeup-x-hi;
+ st,wakeup-y-lo;
+ st,wakeup-y-hi;
+ st,wakeup-z-lo;
+ st,wakeup-z-hi;
+ };
+
+Example for a I2C device node:
+
+ lis331dlh: lis331dlh@18 {
+ compatible = "st,lis331dlh", "st,lis3lv02d";
+ reg = <0x18>;
+ Vdd-supply = <&lis3_reg>;
+ Vdd_IO-supply = <&lis3_reg>;
+
+ st,click-single-x;
+ st,click-single-y;
+ st,click-single-z;
+ st,click-thresh-x = <10>;
+ st,click-thresh-y = <10>;
+ st,click-thresh-z = <10>;
+ st,irq1-click;
+ st,irq2-click;
+ st,wakeup-x-lo;
+ st,wakeup-x-hi;
+ st,wakeup-y-lo;
+ st,wakeup-y-hi;
+ st,wakeup-z-lo;
+ st,wakeup-z-hi;
+ st,min-limit-x = <120>;
+ st,min-limit-y = <120>;
+ st,min-limit-z = <140>;
+ st,max-limit-x = <550>;
+ st,max-limit-y = <550>;
+ st,max-limit-z = <750>;
+ };
+
diff --git a/kernel/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt b/kernel/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt
new file mode 100644
index 000000000..47b205cc9
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt
@@ -0,0 +1,12 @@
+NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 apbmisc block
+
+Required properties:
+- compatible : For Tegra20, must be "nvidia,tegra20-apbmisc". For Tegra30,
+ must be "nvidia,tegra30-apbmisc". Otherwise, must contain
+ "nvidia,<chip>-apbmisc", plus one of the above, where <chip> is tegra114,
+ tegra124, tegra132.
+- reg: Should contain 2 entries: the first entry gives the physical address
+ and length of the registers which contain revision and debug features.
+ The second entry gives the physical address and length of the
+ registers indicating the strapping options.
+
diff --git a/kernel/Documentation/devicetree/bindings/misc/sram.txt b/kernel/Documentation/devicetree/bindings/misc/sram.txt
new file mode 100644
index 000000000..36cbe5aea
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/misc/sram.txt
@@ -0,0 +1,51 @@
+Generic on-chip SRAM
+
+Simple IO memory regions to be managed by the genalloc API.
+
+Required properties:
+
+- compatible : mmio-sram
+
+- reg : SRAM iomem address range
+
+Reserving sram areas:
+---------------------
+
+Each child of the sram node specifies a region of reserved memory. Each
+child node should use a 'reg' property to specify a specific range of
+reserved memory.
+
+Following the generic-names recommended practice, node names should
+reflect the purpose of the node. Unit address (@<address>) should be
+appended to the name.
+
+Required properties in the sram node:
+
+- #address-cells, #size-cells : should use the same values as the root node
+- ranges : standard definition, should translate from local addresses
+ within the sram to bus addresses
+
+Required properties in the area nodes:
+
+- reg : iomem address range, relative to the SRAM range
+
+Optional properties in the area nodes:
+
+- compatible : standard definition, should contain a vendor specific string
+ in the form <vendor>,[<device>-]<usage>
+
+Example:
+
+sram: sram@5c000000 {
+ compatible = "mmio-sram";
+ reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
+
+ #adress-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x5c000000 0x40000>;
+
+ smp-sram@100 {
+ compatible = "socvendor,smp-sram";
+ reg = <0x100 0x50>;
+ };
+};
diff --git a/kernel/Documentation/devicetree/bindings/misc/ti,dac7512.txt b/kernel/Documentation/devicetree/bindings/misc/ti,dac7512.txt
new file mode 100644
index 000000000..1db45939d
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/misc/ti,dac7512.txt
@@ -0,0 +1,20 @@
+TI DAC7512 DEVICETREE BINDINGS
+
+Required properties:
+
+ - "compatible" Must be set to "ti,dac7512"
+
+Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
+apply. In particular, "reg" and "spi-max-frequency" properties must be given.
+
+
+Example:
+
+ spi_master {
+ dac7512: dac7512@0 {
+ compatible = "ti,dac7512";
+ reg = <0>; /* CS0 */
+ spi-max-frequency = <1000000>;
+ };
+ };
+