These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 0 insertions, 41 deletions

diff --git a/kernel/Documentation/devicetree/bindings/mipi/nvidia,tegra114-mipi.txt b/kernel/Documentation/devicetree/bindings/mipi/nvidia,tegra114-mipi.txt
deleted file mode 100644
index e4a25cedc..000000000
--- a/kernel/Documentation/devicetree/bindings/mipi/nvidia,tegra114-mipi.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-NVIDIA Tegra MIPI pad calibration controller
-
-Required properties:
-- compatible: "nvidia,tegra<chip>-mipi"
-- reg: Physical base address and length of the controller's registers.
-- clocks: Must contain an entry for each entry in clock-names.
-  See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
-  - mipi-cal
-- #nvidia,mipi-calibrate-cells: Should be 1. The cell is a bitmask of the pads
-  that need to be calibrated for a given device.
-
-User nodes need to contain an nvidia,mipi-calibrate property that has a
-phandle to refer to the calibration controller node and a bitmask of the pads
-that need to be calibrated.
-
-Example:
-
-	mipi: mipi@700e3000 {
-		compatible = "nvidia,tegra114-mipi";
-		reg = <0x700e3000 0x100>;
-		clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>;
-		clock-names = "mipi-cal";
-		#nvidia,mipi-calibrate-cells = <1>;
-	};
-
-	...
-
-	host1x@50000000 {
-		...
-
-		dsi@54300000 {
-			...
-
-			nvidia,mipi-calibrate = <&mipi 0x060>;
-
-			...
-		};
-
-		...
-	};