These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

4 files changed, 87 insertions, 8 deletions

diff --git a/kernel/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt b/kernel/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt
new file mode 100644
index 000000000..e893615ef
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt
@@ -0,0 +1,26 @@
+Broadcom BCM2835 VideoCore mailbox IPC
+
+Required properties:
+
+- compatible:	Should be "brcm,bcm2835-mbox"
+- reg:		Specifies base physical address and size of the registers
+- interrupts:	The interrupt number
+		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+- #mbox-cells:	Specifies the number of cells needed to encode a mailbox
+		  channel. The value shall be 0, since there is only one
+		  mailbox channel implemented by the device.
+
+Example:
+
+mailbox: mailbox@7e00b800 {
+	compatible = "brcm,bcm2835-mbox";
+	reg = <0x7e00b880 0x40>;
+	interrupts = <0 1>;
+	#mbox-cells = <0>;
+};
+
+firmware: firmware {
+	compatible = "raspberrypi,firmware";
+	mboxes = <&mailbox>;
+	#power-domain-cells = <1>;
+};
diff --git a/kernel/Documentation/devicetree/bindings/mailbox/mailbox.txt b/kernel/Documentation/devicetree/bindings/mailbox/mailbox.txt
index 1a2cd3d26..be05b9746 100644
--- a/kernel/Documentation/devicetree/bindings/mailbox/mailbox.txt
+++ b/kernel/Documentation/devicetree/bindings/mailbox/mailbox.txt
@@ -22,17 +22,11 @@ Required property:
 - mboxes: List of phandle and mailbox channel specifiers.
 
 Optional property:
-- mbox-names: List of identifier strings for each mailbox channel
-		required by the client. The use of this property
-		is discouraged in favor of using index in list of
-		'mboxes' while requesting a mailbox. Instead the
-		platforms may define channel indices, in DT headers,
-		to something legible.
+- mbox-names: List of identifier strings for each mailbox channel.
 
 Example:
 	pwr_cntrl: power {
 		...
 		mbox-names = "pwr-ctrl", "rpc";
-		mboxes = <&mailbox 0
-			&mailbox 1>;
+		mboxes = <&mailbox 0 &mailbox 1>;
 	};
diff --git a/kernel/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt b/kernel/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt
index d1a043339..9b40c4925 100644
--- a/kernel/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt
+++ b/kernel/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt
@@ -75,6 +75,14 @@ data that represent the following:
     Cell #3 (usr_id)  - mailbox user id for identifying the interrupt line
                         associated with generating a tx/rx fifo interrupt.
 
+Optional Properties:
+--------------------
+- ti,mbox-send-noirq:   Quirk flag to allow the client user of this sub-mailbox
+                        to send messages without triggering a Tx ready interrupt,
+                        and to control the Tx ticker. Should be used only on
+                        sub-mailboxes used to communicate with WkupM3 remote
+                        processor on AM33xx/AM43xx SoCs.
+
 Mailbox Users:
 ==============
 A device needing to communicate with a target processor device should specify
diff --git a/kernel/Documentation/devicetree/bindings/mailbox/sti-mailbox.txt b/kernel/Documentation/devicetree/bindings/mailbox/sti-mailbox.txt
new file mode 100644
index 000000000..b61eec920
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/mailbox/sti-mailbox.txt
@@ -0,0 +1,51 @@
+ST Microelectronics Mailbox Driver
+
+Each ST Mailbox IP currently consists of 4 instances of 32 channels.  Messages
+are passed between Application and Remote processors using shared memory.
+
+Controller
+----------
+
+Required properties:
+- compatible		: Should be "st,stih407-mailbox"
+- reg			: Offset and length of the device's register set
+- mbox-name		: Name of the mailbox
+- #mbox-cells:		: Must be 2
+			  <&phandle instance channel direction>
+			    phandle   : Label name of controller
+			    instance  : Instance number
+			    channel   : Channel number
+
+Optional properties
+- interrupts		: Contains the IRQ line for a Rx mailbox
+
+Example:
+
+mailbox0: mailbox@0  {
+	compatible	= "st,stih407-mailbox";
+	reg		= <0x08f00000 0x1000>;
+	interrupts	= <GIC_SPI 1 IRQ_TYPE_NONE>;
+	#mbox-cells	= <2>;
+	mbox-name	= "a9";
+};
+
+Client
+------
+
+Required properties:
+- compatible		: Many (See the client docs)
+- reg			: Shared (between Application and Remote) memory address
+- mboxes		: Standard property to specify a Mailbox (See ./mailbox.txt)
+			  Cells must match 'mbox-cells' (See Controller docs above)
+
+Optional properties
+- mbox-names		: Name given to channels seen in the 'mboxes' property.
+
+Example:
+
+mailbox_test {
+	compatible	= "mailbox_test";
+	reg		= <0x[shared_memory_address], [shared_memory_size]>;
+	mboxes		= <&mailbox2 0 1>, <&mailbox0 2 1>;
+	mbox-names	= "tx",	"rx";
+};