summaryrefslogtreecommitdiffstats
path: root/kernel/Documentation/devicetree/bindings/leds
diff options
context:
space:
mode:
authorYunhong Jiang <yunhong.jiang@intel.com>2015-08-04 12:17:53 -0700
committerYunhong Jiang <yunhong.jiang@intel.com>2015-08-04 15:44:42 -0700
commit9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00 (patch)
tree1c9cafbcd35f783a87880a10f85d1a060db1a563 /kernel/Documentation/devicetree/bindings/leds
parent98260f3884f4a202f9ca5eabed40b1354c489b29 (diff)
Add the rt linux 4.1.3-rt3 as base
Import the rt linux 4.1.3-rt3 as OPNFV kvm base. It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and the base is: commit 0917f823c59692d751951bf5ea699a2d1e2f26a2 Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Date: Sat Jul 25 12:13:34 2015 +0200 Prepare v4.1.3-rt3 Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> We lose all the git history this way and it's not good. We should apply another opnfv project repo in future. Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423 Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Diffstat (limited to 'kernel/Documentation/devicetree/bindings/leds')
-rw-r--r--kernel/Documentation/devicetree/bindings/leds/common.txt55
-rw-r--r--kernel/Documentation/devicetree/bindings/leds/leds-gpio.txt66
-rw-r--r--kernel/Documentation/devicetree/bindings/leds/leds-lp55xx.txt228
-rw-r--r--kernel/Documentation/devicetree/bindings/leds/leds-lp8860.txt29
-rw-r--r--kernel/Documentation/devicetree/bindings/leds/leds-ns2.txt26
-rw-r--r--kernel/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt43
-rw-r--r--kernel/Documentation/devicetree/bindings/leds/leds-pwm.txt50
-rw-r--r--kernel/Documentation/devicetree/bindings/leds/pca963x.txt48
-rw-r--r--kernel/Documentation/devicetree/bindings/leds/register-bit-led.txt99
-rw-r--r--kernel/Documentation/devicetree/bindings/leds/tca6507.txt49
10 files changed, 693 insertions, 0 deletions
diff --git a/kernel/Documentation/devicetree/bindings/leds/common.txt b/kernel/Documentation/devicetree/bindings/leds/common.txt
new file mode 100644
index 000000000..747c53805
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/leds/common.txt
@@ -0,0 +1,55 @@
+Common leds properties.
+
+LED and flash LED devices provide the same basic functionality as current
+regulators, but extended with LED and flash LED specific features like
+blinking patterns, flash timeout, flash faults and external flash strobe mode.
+
+Many LED devices expose more than one current output that can be connected
+to one or more discrete LED component. Since the arrangement of connections
+can influence the way of the LED device initialization, the LED components
+have to be tightly coupled with the LED device binding. They are represented
+by child nodes of the parent LED device binding.
+
+Optional properties for child nodes:
+- led-sources : List of device current outputs the LED is connected to. The
+ outputs are identified by the numbers that must be defined
+ in the LED device binding documentation.
+- label : The label for this LED. If omitted, the label is taken from the node
+ name (excluding the unit address). It has to uniquely identify
+ a device, i.e. no other LED class device can be assigned the same
+ label.
+
+- linux,default-trigger : This parameter, if present, is a
+ string defining the trigger assigned to the LED. Current triggers are:
+ "backlight" - LED will act as a back-light, controlled by the framebuffer
+ system
+ "default-on" - LED will turn on (but for leds-gpio see "default-state"
+ property in Documentation/devicetree/bindings/gpio/led.txt)
+ "heartbeat" - LED "double" flashes at a load average based rate
+ "ide-disk" - LED indicates disk activity
+ "timer" - LED flashes at a fixed, configurable rate
+
+- max-microamp : maximum intensity in microamperes of the LED
+ (torch LED for flash devices)
+- flash-max-microamp : maximum intensity in microamperes of the
+ flash LED; it is mandatory if the LED should
+ support the flash mode
+- flash-timeout-us : timeout in microseconds after which the flash
+ LED is turned off
+
+
+Examples:
+
+system-status {
+ label = "Status";
+ linux,default-trigger = "heartbeat";
+ ...
+};
+
+camera-flash {
+ label = "Flash";
+ led-sources = <0>, <1>;
+ max-microamp = <50000>;
+ flash-max-microamp = <320000>;
+ flash-timeout-us = <500000>;
+};
diff --git a/kernel/Documentation/devicetree/bindings/leds/leds-gpio.txt b/kernel/Documentation/devicetree/bindings/leds/leds-gpio.txt
new file mode 100644
index 000000000..fea1ebfe2
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/leds/leds-gpio.txt
@@ -0,0 +1,66 @@
+LEDs connected to GPIO lines
+
+Required properties:
+- compatible : should be "gpio-leds".
+
+Each LED is represented as a sub-node of the gpio-leds device. Each
+node's name represents the name of the corresponding LED.
+
+LED sub-node properties:
+- gpios : Should specify the LED's GPIO, see "gpios property" in
+ Documentation/devicetree/bindings/gpio/gpio.txt. Active low LEDs should be
+ indicated using flags in the GPIO specifier.
+- label : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+- default-state: (optional) The initial state of the LED. Valid
+ values are "on", "off", and "keep". If the LED is already on or off
+ and the default-state property is set the to same value, then no
+ glitch should be produced where the LED momentarily turns off (or
+ on). The "keep" setting will keep the LED at whatever its current
+ state is, without producing a glitch. The default is off if this
+ property is not present.
+- retain-state-suspended: (optional) The suspend state can be retained.Such
+ as charge-led gpio.
+
+Examples:
+
+#include <dt-bindings/gpio/gpio.h>
+
+leds {
+ compatible = "gpio-leds";
+ hdd {
+ label = "IDE Activity";
+ gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "ide-disk";
+ };
+
+ fault {
+ gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>;
+ /* Keep LED on if BIOS detected hardware fault */
+ default-state = "keep";
+ };
+};
+
+run-control {
+ compatible = "gpio-leds";
+ red {
+ gpios = <&mpc8572 6 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ green {
+ gpios = <&mpc8572 7 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+};
+
+leds {
+ compatible = "gpio-leds";
+
+ charger-led {
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "max8903-charger-charging";
+ retain-state-suspended;
+ };
+};
diff --git a/kernel/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/kernel/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
new file mode 100644
index 000000000..1b66a413f
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
@@ -0,0 +1,228 @@
+Binding for TI/National Semiconductor LP55xx Led Drivers
+
+Required properties:
+- compatible: one of
+ national,lp5521
+ national,lp5523
+ ti,lp55231
+ ti,lp5562
+ ti,lp8501
+
+- reg: I2C slave address
+- clock-mode: Input clock mode, (0: automode, 1: internal, 2: external)
+
+Each child has own specific current settings
+- led-cur: Current setting at each led channel (mA x10, 0 if led is not connected)
+- max-cur: Maximun current at each led channel.
+
+Optional properties:
+- enable-gpio: GPIO attached to the chip's enable pin
+- label: Used for naming LEDs
+- pwr-sel: LP8501 specific property. Power selection for output channels.
+ 0: D1~9 are connected to VDD
+ 1: D1~6 with VDD, D7~9 with VOUT
+ 2: D1~6 with VOUT, D7~9 with VDD
+ 3: D1~9 are connected to VOUT
+
+Alternatively, each child can have a specific channel name and trigger:
+- chan-name (optional): name of channel
+- linux,default-trigger (optional): see
+ Documentation/devicetree/bindings/leds/common.txt
+
+example 1) LP5521
+3 LED channels, external clock used. Channel names are 'lp5521_pri:channel0',
+'lp5521_pri:channel1' and 'lp5521_pri:channel2', with a heartbeat trigger
+on channel 0.
+
+lp5521@32 {
+ compatible = "national,lp5521";
+ reg = <0x32>;
+ label = "lp5521_pri";
+ clock-mode = /bits/ 8 <2>;
+
+ chan0 {
+ led-cur = /bits/ 8 <0x2f>;
+ max-cur = /bits/ 8 <0x5f>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ chan1 {
+ led-cur = /bits/ 8 <0x2f>;
+ max-cur = /bits/ 8 <0x5f>;
+ };
+
+ chan2 {
+ led-cur = /bits/ 8 <0x2f>;
+ max-cur = /bits/ 8 <0x5f>;
+ };
+};
+
+example 2) LP5523
+9 LED channels with specific name. Internal clock used.
+The I2C slave address is configurable with ASEL1 and ASEL0 pins.
+Available addresses are 32/33/34/35h.
+
+ASEL1 ASEL0 Address
+-------------------------
+ GND GND 32h
+ GND VEN 33h
+ VEN GND 34h
+ VEN VEN 35h
+
+lp5523@32 {
+ compatible = "national,lp5523";
+ reg = <0x32>;
+ clock-mode = /bits/ 8 <1>;
+
+ chan0 {
+ chan-name = "d1";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ chan1 {
+ chan-name = "d2";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ chan2 {
+ chan-name = "d3";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ chan3 {
+ chan-name = "d4";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ chan4 {
+ chan-name = "d5";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ chan5 {
+ chan-name = "d6";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ chan6 {
+ chan-name = "d7";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ chan7 {
+ chan-name = "d8";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ chan8 {
+ chan-name = "d9";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+};
+
+example 3) LP5562
+4 channels are defined.
+
+lp5562@30 {
+ compatible = "ti,lp5562";
+ reg = <0x30>;
+ clock-mode = /bits/8 <2>;
+
+ chan0 {
+ chan-name = "R";
+ led-cur = /bits/ 8 <0x20>;
+ max-cur = /bits/ 8 <0x60>;
+ };
+
+ chan1 {
+ chan-name = "G";
+ led-cur = /bits/ 8 <0x20>;
+ max-cur = /bits/ 8 <0x60>;
+ };
+
+ chan2 {
+ chan-name = "B";
+ led-cur = /bits/ 8 <0x20>;
+ max-cur = /bits/ 8 <0x60>;
+ };
+
+ chan3 {
+ chan-name = "W";
+ led-cur = /bits/ 8 <0x20>;
+ max-cur = /bits/ 8 <0x60>;
+ };
+};
+
+example 4) LP8501
+9 channels are defined. The 'pwr-sel' is LP8501 specific property.
+Others are same as LP5523.
+
+lp8501@32 {
+ compatible = "ti,lp8501";
+ reg = <0x32>;
+ clock-mode = /bits/ 8 <2>;
+ pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */
+
+ chan0 {
+ chan-name = "d1";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ chan1 {
+ chan-name = "d2";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ chan2 {
+ chan-name = "d3";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ chan3 {
+ chan-name = "d4";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ chan4 {
+ chan-name = "d5";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ chan5 {
+ chan-name = "d6";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ chan6 {
+ chan-name = "d7";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ chan7 {
+ chan-name = "d8";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ chan8 {
+ chan-name = "d9";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+};
diff --git a/kernel/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/kernel/Documentation/devicetree/bindings/leds/leds-lp8860.txt
new file mode 100644
index 000000000..aad38dd94
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/leds/leds-lp8860.txt
@@ -0,0 +1,29 @@
+* Texas Instruments - lp8860 4-Channel LED Driver
+
+The LP8860-Q1 is an high-efficiency LED
+driver with boost controller. It has 4 high-precision
+current sinks that can be controlled by a PWM input
+signal, a SPI/I2C master, or both.
+
+Required properties:
+ - compatible:
+ "ti,lp8860"
+ - reg - I2C slave address
+ - label - Used for naming LEDs
+
+Optional properties:
+ - enable-gpio - gpio pin to enable/disable the device.
+ - supply - "vled" - LED supply
+
+Example:
+
+leds: leds@6 {
+ compatible = "ti,lp8860";
+ reg = <0x2d>;
+ label = "display_cluster";
+ enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ vled-supply = <&vbatt>;
+}
+
+For more product information please see the link below:
+http://www.ti.com/product/lp8860-q1
diff --git a/kernel/Documentation/devicetree/bindings/leds/leds-ns2.txt b/kernel/Documentation/devicetree/bindings/leds/leds-ns2.txt
new file mode 100644
index 000000000..aef3aca34
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/leds/leds-ns2.txt
@@ -0,0 +1,26 @@
+Binding for dual-GPIO LED found on Network Space v2 (and parents).
+
+Required properties:
+- compatible: "lacie,ns2-leds".
+
+Each LED is represented as a sub-node of the ns2-leds device.
+
+Required sub-node properties:
+- cmd-gpio: Command LED GPIO. See OF device-tree GPIO specification.
+- slow-gpio: Slow LED GPIO. See OF device-tree GPIO specification.
+
+Optional sub-node properties:
+- label: Name for this LED. If omitted, the label is taken from the node name.
+- linux,default-trigger: Trigger assigned to the LED.
+
+Example:
+
+ns2-leds {
+ compatible = "lacie,ns2-leds";
+
+ blue-sata {
+ label = "ns2:blue:sata";
+ slow-gpio = <&gpio0 29 0>;
+ cmd-gpio = <&gpio0 30 0>;
+ };
+};
diff --git a/kernel/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt b/kernel/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt
new file mode 100644
index 000000000..a85a964d6
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/leds/leds-pm8941-wled.txt
@@ -0,0 +1,43 @@
+Binding for Qualcomm PM8941 WLED driver
+
+Required properties:
+- compatible: should be "qcom,pm8941-wled"
+- reg: slave address
+
+Optional properties:
+- label: The label for this led
+ See Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger: Default trigger assigned to the LED
+ See Documentation/devicetree/bindings/leds/common.txt
+- qcom,cs-out: bool; enable current sink output
+- qcom,cabc: bool; enable content adaptive backlight control
+- qcom,ext-gen: bool; use externally generated modulator signal to dim
+- qcom,current-limit: mA; per-string current limit; value from 0 to 25
+ default: 20mA
+- qcom,current-boost-limit: mA; boost current limit; one of:
+ 105, 385, 525, 805, 980, 1260, 1400, 1680
+ default: 805mA
+- qcom,switching-freq: kHz; switching frequency; one of:
+ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371,
+ 1600, 1920, 2400, 3200, 4800, 9600,
+ default: 1600kHz
+- qcom,ovp: V; Over-voltage protection limit; one of:
+ 27, 29, 32, 35
+ default: 29V
+- qcom,num-strings: #; number of led strings attached; value from 1 to 3
+ default: 2
+
+Example:
+
+pm8941-wled@d800 {
+ compatible = "qcom,pm8941-wled";
+ reg = <0xd800>;
+ label = "backlight";
+
+ qcom,cs-out;
+ qcom,current-limit = <20>;
+ qcom,current-boost-limit = <805>;
+ qcom,switching-freq = <1600>;
+ qcom,ovp = <29>;
+ qcom,num-strings = <2>;
+};
diff --git a/kernel/Documentation/devicetree/bindings/leds/leds-pwm.txt b/kernel/Documentation/devicetree/bindings/leds/leds-pwm.txt
new file mode 100644
index 000000000..6c6583c35
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/leds/leds-pwm.txt
@@ -0,0 +1,50 @@
+LED connected to PWM
+
+Required properties:
+- compatible : should be "pwm-leds".
+
+Each LED is represented as a sub-node of the pwm-leds device. Each
+node's name represents the name of the corresponding LED.
+
+LED sub-node properties:
+- pwms : PWM property to point to the PWM device (phandle)/port (id) and to
+ specify the period time to be used: <&phandle id period_ns>;
+- pwm-names : (optional) Name to be used by the PWM subsystem for the PWM device
+ For the pwms and pwm-names property please refer to:
+ Documentation/devicetree/bindings/pwm/pwm.txt
+- max-brightness : Maximum brightness possible for the LED
+- active-low : (optional) For PWMs where the LED is wired to supply
+ rather than ground.
+- label : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+twl_pwm: pwm {
+ /* provides two PWMs (id 0, 1 for PWM1 and PWM2) */
+ compatible = "ti,twl6030-pwm";
+ #pwm-cells = <2>;
+};
+
+twl_pwmled: pwmled {
+ /* provides one PWM (id 0 for Charing indicator LED) */
+ compatible = "ti,twl6030-pwmled";
+ #pwm-cells = <2>;
+};
+
+pwmleds {
+ compatible = "pwm-leds";
+ kpad {
+ label = "omap4::keypad";
+ pwms = <&twl_pwm 0 7812500>;
+ max-brightness = <127>;
+ };
+
+ charging {
+ label = "omap4:green:chrg";
+ pwms = <&twl_pwmled 0 7812500>;
+ max-brightness = <255>;
+ };
+};
diff --git a/kernel/Documentation/devicetree/bindings/leds/pca963x.txt b/kernel/Documentation/devicetree/bindings/leds/pca963x.txt
new file mode 100644
index 000000000..dafbe9931
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/leds/pca963x.txt
@@ -0,0 +1,48 @@
+LEDs connected to pca9632, pca9633 or pca9634
+
+Required properties:
+- compatible : should be : "nxp,pca9632", "nxp,pca9633", "nxp,pca9634" or "nxp,pca9635"
+
+Optional properties:
+- nxp,totem-pole : use totem pole (push-pull) instead of open-drain (pca9632 defaults
+ to open-drain, newer chips to totem pole)
+- nxp,hw-blink : use hardware blinking instead of software blinking
+
+Each led is represented as a sub-node of the nxp,pca963x device.
+
+LED sub-node properties:
+- label : (optional) see Documentation/devicetree/bindings/leds/common.txt
+- reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633,
+ 0 to 7 in pca9634, or 0 to 15 in pca9635)
+- linux,default-trigger : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+
+Examples:
+
+pca9632: pca9632 {
+ compatible = "nxp,pca9632";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x62>;
+
+ red@0 {
+ label = "red";
+ reg = <0>;
+ linux,default-trigger = "none";
+ };
+ green@1 {
+ label = "green";
+ reg = <1>;
+ linux,default-trigger = "none";
+ };
+ blue@2 {
+ label = "blue";
+ reg = <2>;
+ linux,default-trigger = "none";
+ };
+ unused@3 {
+ label = "unused";
+ reg = <3>;
+ linux,default-trigger = "none";
+ };
+};
diff --git a/kernel/Documentation/devicetree/bindings/leds/register-bit-led.txt b/kernel/Documentation/devicetree/bindings/leds/register-bit-led.txt
new file mode 100644
index 000000000..379cefdc0
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/leds/register-bit-led.txt
@@ -0,0 +1,99 @@
+Device Tree Bindings for Register Bit LEDs
+
+Register bit leds are used with syscon multifunctional devices
+where single bits in a certain register can turn on/off a
+single LED. The register bit LEDs appear as children to the
+syscon device, with the proper compatible string. For the
+syscon bindings see:
+Documentation/devicetree/bindings/mfd/syscon.txt
+
+Each LED is represented as a sub-node of the syscon device. Each
+node's name represents the name of the corresponding LED.
+
+LED sub-node properties:
+
+Required properties:
+- compatible : must be "register-bit-led"
+- offset : register offset to the register controlling this LED
+- mask : bit mask for the bit controlling this LED in the register
+ typically 0x01, 0x02, 0x04 ...
+
+Optional properties:
+- label : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+- default-state: (optional) The initial state of the LED. Valid
+ values are "on", "off", and "keep". If the LED is already on or off
+ and the default-state property is set the to same value, then no
+ glitch should be produced where the LED momentarily turns off (or
+ on). The "keep" setting will keep the LED at whatever its current
+ state is, without producing a glitch. The default is off if this
+ property is not present.
+
+Example:
+
+syscon: syscon@10000000 {
+ compatible = "arm,realview-pb1176-syscon", "syscon";
+ reg = <0x10000000 0x1000>;
+
+ led@08.0 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x01>;
+ label = "versatile:0";
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+ led@08.1 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x02>;
+ label = "versatile:1";
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+ led@08.2 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x04>;
+ label = "versatile:2";
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+ led@08.3 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x08>;
+ label = "versatile:3";
+ default-state = "off";
+ };
+ led@08.4 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x10>;
+ label = "versatile:4";
+ default-state = "off";
+ };
+ led@08.5 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x20>;
+ label = "versatile:5";
+ default-state = "off";
+ };
+ led@08.6 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x40>;
+ label = "versatile:6";
+ default-state = "off";
+ };
+ led@08.7 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x80>;
+ label = "versatile:7";
+ default-state = "off";
+ };
+};
diff --git a/kernel/Documentation/devicetree/bindings/leds/tca6507.txt b/kernel/Documentation/devicetree/bindings/leds/tca6507.txt
new file mode 100644
index 000000000..bad910279
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/leds/tca6507.txt
@@ -0,0 +1,49 @@
+LEDs connected to tca6507
+
+Required properties:
+- compatible : should be : "ti,tca6507".
+- #address-cells: must be 1
+- #size-cells: must be 0
+- reg: typically 0x45.
+
+Optional properties:
+- gpio-controller: allows lines to be used as output-only GPIOs.
+- #gpio-cells: if present, must not be 0.
+
+Each led is represented as a sub-node of the ti,tca6507 device.
+
+LED sub-node properties:
+- label : (optional) see Documentation/devicetree/bindings/leds/common.txt
+- reg : number of LED line (could be from 0 to 6)
+- linux,default-trigger : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+- compatible: either "led" (the default) or "gpio".
+
+Examples:
+
+tca6507@45 {
+ compatible = "ti,tca6507";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x45>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ led0: red-aux@0 {
+ label = "red:aux";
+ reg = <0x0>;
+ };
+
+ led1: green-aux@1 {
+ label = "green:aux";
+ reg = <0x5>;
+ linux,default-trigger = "default-on";
+ };
+
+ wifi-reset@6 {
+ reg = <0x6>;
+ compatible = "gpio";
+ };
+};
+