These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

4 files changed, 99 insertions, 1 deletions

diff --git a/kernel/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt b/kernel/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt
new file mode 100644
index 000000000..947863acc
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt
@@ -0,0 +1,59 @@
+* ARM SMMUv3 Architecture Implementation
+
+The SMMUv3 architecture is a significant deparature from previous
+revisions, replacing the MMIO register interface with in-memory command
+and event queues and adding support for the ATS and PRI components of
+the PCIe specification.
+
+** SMMUv3 required properties:
+
+- compatible        : Should include:
+
+                      * "arm,smmu-v3" for any SMMUv3 compliant
+                        implementation. This entry should be last in the
+                        compatible list.
+
+- reg               : Base address and size of the SMMU.
+
+- interrupts        : Non-secure interrupt list describing the wired
+                      interrupt sources corresponding to entries in
+                      interrupt-names. If no wired interrupts are
+                      present then this property may be omitted.
+
+- interrupt-names   : When the interrupts property is present, should
+                      include the following:
+                      * "eventq"    - Event Queue not empty
+                      * "priq"      - PRI Queue not empty
+                      * "cmdq-sync" - CMD_SYNC complete
+                      * "gerror"    - Global Error activated
+
+** SMMUv3 optional properties:
+
+- dma-coherent      : Present if DMA operations made by the SMMU (page
+                      table walks, stream table accesses etc) are cache
+                      coherent with the CPU.
+
+                      NOTE: this only applies to the SMMU itself, not
+                      masters connected upstream of the SMMU.
+
+- msi-parent        : See the generic MSI binding described in
+                        devicetree/bindings/interrupt-controller/msi.txt
+                      for a description of the msi-parent property.
+
+- hisilicon,broken-prefetch-cmd
+                    : Avoid sending CMD_PREFETCH_* commands to the SMMU.
+
+** Example
+
+        smmu@2b400000 {
+                compatible = "arm,smmu-v3";
+                reg = <0x0 0x2b400000 0x0 0x20000>;
+                interrupts = <GIC_SPI 74 IRQ_TYPE_EDGE_RISING>,
+                             <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>,
+                             <GIC_SPI 77 IRQ_TYPE_EDGE_RISING>,
+                             <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>;
+                interrupt-names = "eventq", "priq", "cmdq-sync", "gerror";
+                dma-coherent;
+                #iommu-cells = <0>;
+                msi-parent = <&its 0xff0000>;
+        };
diff --git a/kernel/Documentation/devicetree/bindings/iommu/arm,smmu.txt b/kernel/Documentation/devicetree/bindings/iommu/arm,smmu.txt
index 06760503a..718074501 100644
--- a/kernel/Documentation/devicetree/bindings/iommu/arm,smmu.txt
+++ b/kernel/Documentation/devicetree/bindings/iommu/arm,smmu.txt
@@ -43,6 +43,12 @@ conditions.
 
 ** System MMU optional properties:
 
+- dma-coherent  : Present if page table walks made by the SMMU are
+                  cache coherent with the CPU.
+
+                  NOTE: this only applies to the SMMU itself, not
+                  masters connected upstream of the SMMU.
+
 - calxeda,smmu-secure-config-access : Enable proper handling of buggy
                   implementations that always use secure access to
                   SMMU configuration registers. In this case non-secure
diff --git a/kernel/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt b/kernel/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt
index 729543c47..bc620fe32 100644
--- a/kernel/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt
+++ b/kernel/Documentation/devicetree/bindings/iommu/samsung,sysmmu.txt
@@ -47,7 +47,7 @@ Required properties:
 - clocks: Required if the System MMU is needed to gate its clock.
 - power-domains: Required if the System MMU is needed to gate its power.
 	  Please refer to the following document:
-	  Documentation/devicetree/bindings/arm/exynos/power_domain.txt
+	  Documentation/devicetree/bindings/power/pd-samsung.txt
 
 Examples:
 	gsc_0: gsc@13e00000 {
diff --git a/kernel/Documentation/devicetree/bindings/iommu/ti,omap-iommu.txt b/kernel/Documentation/devicetree/bindings/iommu/ti,omap-iommu.txt
index 42531dc38..4bd10dd88 100644
--- a/kernel/Documentation/devicetree/bindings/iommu/ti,omap-iommu.txt
+++ b/kernel/Documentation/devicetree/bindings/iommu/ti,omap-iommu.txt
@@ -4,23 +4,56 @@ Required properties:
 - compatible : Should be one of,
 		"ti,omap2-iommu" for OMAP2/OMAP3 IOMMU instances
 		"ti,omap4-iommu" for OMAP4/OMAP5 IOMMU instances
+		"ti,dra7-dsp-iommu" for DRA7xx DSP IOMMU instances
 		"ti,dra7-iommu" for DRA7xx IOMMU instances
 - ti,hwmods  : Name of the hwmod associated with the IOMMU instance
 - reg        : Address space for the configuration registers
 - interrupts : Interrupt specifier for the IOMMU instance
+- #iommu-cells : Should be 0. OMAP IOMMUs are all "single-master" devices,
+                 and needs no additional data in the pargs specifier. Please
+                 also refer to the generic bindings document for more info
+                 on this property,
+                     Documentation/devicetree/bindings/iommu/iommu.txt
 
 Optional properties:
 - ti,#tlb-entries : Number of entries in the translation look-aside buffer.
                     Should be either 8 or 32 (default: 32)
 - ti,iommu-bus-err-back : Indicates the IOMMU instance supports throwing
 		          back a bus error response on MMU faults.
+- ti,syscon-mmuconfig : Should be a pair of the phandle to the DSP_SYSTEM
+                        syscon node that contains the additional control
+                        register for enabling the MMU, and the MMU instance
+                        number (0-indexed) within the sub-system. This property
+                        is required for DSP IOMMU instances on DRA7xx SoCs. The
+                        instance number should be 0 for DSP MDMA MMUs and 1 for
+                        DSP EDMA MMUs.
 
 Example:
 	/* OMAP3 ISP MMU */
 	mmu_isp: mmu@480bd400 {
+		#iommu-cells = <0>;
 		compatible = "ti,omap2-iommu";
 		reg = <0x480bd400 0x80>;
 		interrupts = <24>;
 		ti,hwmods = "mmu_isp";
 		ti,#tlb-entries = <8>;
 	};
+
+	/* DRA74x DSP2 MMUs */
+	mmu0_dsp2: mmu@41501000 {
+		compatible = "ti,dra7-dsp-iommu";
+		reg = <0x41501000 0x100>;
+		interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+		ti,hwmods = "mmu0_dsp2";
+		#iommu-cells = <0>;
+		ti,syscon-mmuconfig = <&dsp2_system 0x0>;
+	};
+
+	mmu1_dsp2: mmu@41502000 {
+		compatible = "ti,dra7-dsp-iommu";
+		reg = <0x41502000 0x100>;
+		interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		ti,hwmods = "mmu1_dsp2";
+		#iommu-cells = <0>;
+		ti,syscon-mmuconfig = <&dsp2_system 0x1>;
+	};