Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 32 insertions, 0 deletions

diff --git a/kernel/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
new file mode 100644
index 000000000..492911744
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/snps,dw-apb-ictl.txt
@@ -0,0 +1,32 @@
+Synopsys DesignWare APB interrupt controller (dw_apb_ictl)
+
+Synopsys DesignWare provides interrupt controller IP for APB known as
+dw_apb_ictl. The IP is used as secondary interrupt controller in some SoCs with
+APB bus, e.g. Marvell Armada 1500.
+
+Required properties:
+- compatible: shall be "snps,dw-apb-ictl"
+- reg: physical base address of the controller and length of memory mapped
+  region starting with ENABLE_LOW register
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: number of cells to encode an interrupt-specifier, shall be 1
+- interrupts: interrupt reference to primary interrupt controller
+- interrupt-parent: (optional) reference specific primary interrupt controller
+
+The interrupt sources map to the corresponding bits in the interrupt
+registers, i.e.
+- 0 maps to bit 0 of low interrupts,
+- 1 maps to bit 1 of low interrupts,
+- 32 maps to bit 0 of high interrupts,
+- 33 maps to bit 1 of high interrupts,
+- (optional) fast interrupts start at 64.
+
+Example:
+	aic: interrupt-controller@3000 {
+		compatible = "snps,dw-apb-ictl";
+		reg = <0x3000 0xc00>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+	};