Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 43 insertions, 0 deletions

diff --git a/kernel/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra-ictlr.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra-ictlr.txt
new file mode 100644
index 000000000..1099fe078
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra-ictlr.txt
@@ -0,0 +1,43 @@
+NVIDIA Legacy Interrupt Controller
+
+All Tegra SoCs contain a legacy interrupt controller that routes
+interrupts to the GIC, and also serves as a wakeup source. It is also
+referred to as "ictlr", hence the name of the binding.
+
+The HW block exposes a number of interrupt controllers, each
+implementing a set of 32 interrupts.
+
+Required properties:
+
+- compatible : should be: "nvidia,tegra<chip>-ictlr". The LIC on
+  subsequent SoCs remained backwards-compatible with Tegra30, so on
+  Tegra generations later than Tegra30 the compatible value should
+  include "nvidia,tegra30-ictlr".	
+- reg : Specifies base physical address and size of the registers.
+  Each controller must be described separately (Tegra20 has 4 of them,
+  whereas Tegra30 and later have 5"  
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value must be 3.
+- interrupt-parent : a phandle to the GIC these interrupts are routed
+  to.
+
+Notes:
+
+- Because this HW ultimately routes interrupts to the GIC, the
+  interrupt specifier must be that of the GIC.
+- Only SPIs can use the ictlr as an interrupt parent. SGIs and PPIs
+  are explicitly forbidden.
+
+Example:
+
+	ictlr: interrupt-controller@60004000 {
+		compatible = "nvidia,tegra20-ictlr", "nvidia,tegra-ictlr";
+		reg = <0x60004000 64>,
+		      <0x60004100 64>,
+		      <0x60004200 64>,
+		      <0x60004300 64>;
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&intc>;
+	};