diff options
author | 2016-04-11 10:41:07 +0300 | |
---|---|---|
committer | 2016-04-13 08:17:18 +0300 | |
commit | e09b41010ba33a20a87472ee821fa407a5b8da36 (patch) | |
tree | d10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt | |
parent | f93b97fd65072de626c074dbe099a1fff05ce060 (diff) |
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page.
During the rebasing, the following patch collided:
Force tick interrupt and get rid of softirq magic(I70131fb85).
Collisions have been removed because its logic was found on the
source already.
Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt')
-rw-r--r-- | kernel/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt | 123 |
1 files changed, 123 insertions, 0 deletions
diff --git a/kernel/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/kernel/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt new file mode 100644 index 000000000..7803e77d8 --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt @@ -0,0 +1,123 @@ +* ARM Generic Interrupt Controller, version 3 + +AArch64 SMP cores are often associated with a GICv3, providing Private +Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI), +Software Generated Interrupts (SGI), and Locality-specific Peripheral +Interrupts (LPI). + +Main node required properties: + +- compatible : should at least contain "arm,gic-v3". +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. Must be a single cell with a value of at least 3. + + The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI + interrupts. Other values are reserved for future use. + + The 2nd cell contains the interrupt number for the interrupt type. + SPI interrupts are in the range [0-987]. PPI interrupts are in the + range [0-15]. + + The 3rd cell is the flags, encoded as follows: + bits[3:0] trigger type and level flags. + 1 = edge triggered + 4 = level triggered + + Cells 4 and beyond are reserved for future use. When the 1st cell + has a value of 0 or 1, cells 4 and beyond act as padding, and may be + ignored. It is recommended that padding cells have a value of 0. + +- reg : Specifies base physical address(s) and size of the GIC + registers, in the following order: + - GIC Distributor interface (GICD) + - GIC Redistributors (GICR), one range per redistributor region + - GIC CPU interface (GICC) + - GIC Hypervisor interface (GICH) + - GIC Virtual CPU interface (GICV) + + GICC, GICH and GICV are optional. + +- interrupts : Interrupt source of the VGIC maintenance interrupt. + +Optional + +- redistributor-stride : If using padding pages, specifies the stride + of consecutive redistributors. Must be a multiple of 64kB. + +- #redistributor-regions: The number of independent contiguous regions + occupied by the redistributors. Required if more than one such + region is present. + +Sub-nodes: + +GICv3 has one or more Interrupt Translation Services (ITS) that are +used to route Message Signalled Interrupts (MSI) to the CPUs. + +These nodes must have the following properties: +- compatible : Should at least contain "arm,gic-v3-its". +- msi-controller : Boolean property. Identifies the node as an MSI controller +- #msi-cells: Must be <1>. The single msi-cell is the DeviceID of the device + which will generate the MSI. +- reg: Specifies the base physical address and size of the ITS + registers. + +The main GIC node must contain the appropriate #address-cells, +#size-cells and ranges properties for the reg property of all ITS +nodes. + +Examples: + + gic: interrupt-controller@2cf00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interrupt-controller; + reg = <0x0 0x2f000000 0 0x10000>, // GICD + <0x0 0x2f100000 0 0x200000>, // GICR + <0x0 0x2c000000 0 0x2000>, // GICC + <0x0 0x2c010000 0 0x2000>, // GICH + <0x0 0x2c020000 0 0x2000>; // GICV + interrupts = <1 9 4>; + + gic-its@2c200000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x0 0x2c200000 0 0x200000>; + }; + }; + + gic: interrupt-controller@2c010000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interrupt-controller; + redistributor-stride = <0x0 0x40000>; // 256kB stride + #redistributor-regions = <2>; + reg = <0x0 0x2c010000 0 0x10000>, // GICD + <0x0 0x2d000000 0 0x800000>, // GICR 1: CPUs 0-31 + <0x0 0x2e000000 0 0x800000>; // GICR 2: CPUs 32-63 + <0x0 0x2c040000 0 0x2000>, // GICC + <0x0 0x2c060000 0 0x2000>, // GICH + <0x0 0x2c080000 0 0x2000>; // GICV + interrupts = <1 9 4>; + + gic-its@2c200000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x0 0x2c200000 0 0x200000>; + }; + + gic-its@2c400000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x0 0x2c400000 0 0x200000>; + }; + }; |