These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 36 insertions, 0 deletions

diff --git a/kernel/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt b/kernel/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt
new file mode 100644
index 000000000..853dff96d
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt
@@ -0,0 +1,36 @@
+* Freescale i.MX6UL Touch Controller
+
+Required properties:
+- compatible: must be "fsl,imx6ul-tsc".
+- reg: this touch controller address and the ADC2 address.
+- interrupts: the interrupt of this touch controller and ADC2.
+- clocks: the root clock of touch controller and ADC2.
+- clock-names; must be "tsc" and "adc".
+- xnur-gpio: the X- gpio this controller connect to.
+  This xnur-gpio returns to low once the finger leave the touch screen (The
+  last touch event the touch controller capture).
+
+Optional properties:
+- measure-delay-time: the value of measure delay time.
+  Before X-axis or Y-axis measurement, the screen need some time before
+  even potential distribution ready.
+  This value depends on the touch screen.
+- pre-charge-time: the touch screen need some time to precharge.
+  This value depends on the touch screen.
+
+Example:
+	tsc: tsc@02040000 {
+		compatible = "fsl,imx6ul-tsc";
+		reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX6UL_CLK_IPG>,
+			 <&clks IMX6UL_CLK_ADC2>;
+		clock-names = "tsc", "adc";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc>;
+		xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+		measure-delay-time = <0xfff>;
+		pre-charge-time = <0xffff>;
+		status = "okay";
+	};