These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

2 files changed, 0 insertions, 83 deletions

diff --git a/kernel/Documentation/devicetree/bindings/fb/mxsfb.txt b/kernel/Documentation/devicetree/bindings/fb/mxsfb.txt
deleted file mode 100644
index 96ec5179c..000000000
--- a/kernel/Documentation/devicetree/bindings/fb/mxsfb.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* Freescale MXS LCD Interface (LCDIF)
-
-Required properties:
-- compatible: Should be "fsl,<chip>-lcdif".  Supported chips include
-  imx23 and imx28.
-- reg: Address and length of the register set for lcdif
-- interrupts: Should contain lcdif interrupts
-- display : phandle to display node (see below for details)
-
-* display node
-
-Required properties:
-- bits-per-pixel : <16> for RGB565, <32> for RGB888/666.
-- bus-width : number of data lines.  Could be <8>, <16>, <18> or <24>.
-
-Required sub-node:
-- display-timings : Refer to binding doc display-timing.txt for details.
-
-Examples:
-
-lcdif@80030000 {
-	compatible = "fsl,imx28-lcdif";
-	reg = <0x80030000 2000>;
-	interrupts = <38 86>;
-
-	display: display {
-		bits-per-pixel = <32>;
-		bus-width = <24>;
-
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing0 {
-				clock-frequency = <33500000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <164>;
-				hback-porch = <89>;
-				hsync-len = <10>;
-				vback-porch = <23>;
-				vfront-porch = <10>;
-				vsync-len = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-	};
-};
diff --git a/kernel/Documentation/devicetree/bindings/fb/sm501fb.txt b/kernel/Documentation/devicetree/bindings/fb/sm501fb.txt
deleted file mode 100644
index 9d9f00980..000000000
--- a/kernel/Documentation/devicetree/bindings/fb/sm501fb.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-* SM SM501
-
-The SM SM501 is a LCD controller, with proper hardware, it can also
-drive DVI monitors.
-
-Required properties:
-- compatible : should be "smi,sm501".
-- reg : contain two entries:
-    - First entry: System Configuration register
-    - Second entry: IO space (Display Controller register)
-- interrupts : SMI interrupt to the cpu should be described here.
-- interrupt-parent : the phandle for the interrupt controller that
-  services interrupts for this device.
-
-Optional properties:
-- mode : select a video mode:
-    <xres>x<yres>[-<bpp>][@<refresh>]
-- edid : verbatim EDID data block describing attached display.
-  Data from the detailed timing descriptor will be used to
-  program the display controller.
-- little-endian: available on big endian systems, to
-  set different foreign endian.
-- big-endian: available on little endian systems, to
-  set different foreign endian.
-
-Example for MPC5200:
-	display@1,0 {
-		compatible = "smi,sm501";
-		reg = <1 0x00000000 0x00800000
-		       1 0x03e00000 0x00200000>;
-		interrupts = <1 1 3>;
-		mode = "640x480-32@60";
-		edid = [edid-data];
-	};