These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 0 insertions, 58 deletions

diff --git a/kernel/Documentation/devicetree/bindings/drm/imx/hdmi.txt b/kernel/Documentation/devicetree/bindings/drm/imx/hdmi.txt
deleted file mode 100644
index 1b756cf9a..000000000
--- a/kernel/Documentation/devicetree/bindings/drm/imx/hdmi.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-Device-Tree bindings for HDMI Transmitter
-
-HDMI Transmitter
-================
-
-The HDMI Transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
-with accompanying PHY IP.
-
-Required properties:
- - #address-cells : should be <1>
- - #size-cells : should be <0>
- - compatible : should be "fsl,imx6q-hdmi" or "fsl,imx6dl-hdmi".
- - gpr : should be <&gpr>.
-   The phandle points to the iomuxc-gpr region containing the HDMI
-   multiplexer control register.
- - clocks, clock-names : phandles to the HDMI iahb and isrf clocks, as described
-   in Documentation/devicetree/bindings/clock/clock-bindings.txt and
-   Documentation/devicetree/bindings/clock/imx6q-clock.txt.
- - port@[0-4]: Up to four port nodes with endpoint definitions as defined in
-   Documentation/devicetree/bindings/media/video-interfaces.txt,
-   corresponding to the four inputs to the HDMI multiplexer.
-
-Optional properties:
- - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
-
-example:
-
-	gpr: iomuxc-gpr@020e0000 {
-		/* ... */
-	};
-
-        hdmi: hdmi@0120000 {
-                #address-cells = <1>;
-                #size-cells = <0>;
-                compatible = "fsl,imx6q-hdmi";
-                reg = <0x00120000 0x9000>;
-                interrupts = <0 115 0x04>;
-                gpr = <&gpr>;
-                clocks = <&clks 123>, <&clks 124>;
-                clock-names = "iahb", "isfr";
-                ddc-i2c-bus = <&i2c2>;
-
-                port@0 {
-                        reg = <0>;
-
-                        hdmi_mux_0: endpoint {
-                                remote-endpoint = <&ipu1_di0_hdmi>;
-                        };
-                };
-
-                port@1 {
-                        reg = <1>;
-
-                        hdmi_mux_1: endpoint {
-                                remote-endpoint = <&ipu1_di1_hdmi>;
-                        };
-                };
-        };