diff options
author | José Pekkarinen <jose.pekkarinen@nokia.com> | 2016-04-11 10:41:07 +0300 |
---|---|---|
committer | José Pekkarinen <jose.pekkarinen@nokia.com> | 2016-04-13 08:17:18 +0300 |
commit | e09b41010ba33a20a87472ee821fa407a5b8da36 (patch) | |
tree | d10dc367189862e7ca5c592f033dc3726e1df4e3 /kernel/Documentation/devicetree/bindings/dma/sun4i-dma.txt | |
parent | f93b97fd65072de626c074dbe099a1fff05ce060 (diff) |
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
are taken from kernel.org, and rt patch from the rt wiki download page.
During the rebasing, the following patch collided:
Force tick interrupt and get rid of softirq magic(I70131fb85).
Collisions have been removed because its logic was found on the
source already.
Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>
Diffstat (limited to 'kernel/Documentation/devicetree/bindings/dma/sun4i-dma.txt')
-rw-r--r-- | kernel/Documentation/devicetree/bindings/dma/sun4i-dma.txt | 46 |
1 files changed, 46 insertions, 0 deletions
diff --git a/kernel/Documentation/devicetree/bindings/dma/sun4i-dma.txt b/kernel/Documentation/devicetree/bindings/dma/sun4i-dma.txt new file mode 100644 index 000000000..f1634a27a --- /dev/null +++ b/kernel/Documentation/devicetree/bindings/dma/sun4i-dma.txt @@ -0,0 +1,46 @@ +Allwinner A10 DMA Controller + +This driver follows the generic DMA bindings defined in dma.txt. + +Required properties: + +- compatible: Must be "allwinner,sun4i-a10-dma" +- reg: Should contain the registers base address and length +- interrupts: Should contain a reference to the interrupt used by this device +- clocks: Should contain a reference to the parent AHB clock +- #dma-cells : Should be 2, first cell denoting normal or dedicated dma, + second cell holding the request line number. + +Example: + dma: dma-controller@01c02000 { + compatible = "allwinner,sun4i-a10-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <27>; + clocks = <&ahb_gates 6>; + #dma-cells = <2>; + }; + +Clients: + +DMA clients connected to the Allwinner A10 DMA controller must use the +format described in the dma.txt file, using a three-cell specifier for +each channel: a phandle plus two integer cells. +The three cells in order are: + +1. A phandle pointing to the DMA controller. +2. Whether it is using normal (0) or dedicated (1) channels +3. The port ID as specified in the datasheet + +Example: + spi2: spi@01c17000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c17000 0x1000>; + interrupts = <0 12 4>; + clocks = <&ahb_gates 22>, <&spi2_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma 1 29>, <&dma 1 28>; + dma-names = "rx", "tx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; |