These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

48 files changed, 815 insertions, 0 deletions

diff --git a/kernel/Documentation/devicetree/bindings/display/panel/ampire,am800480r3tmqwa1h.txt b/kernel/Documentation/devicetree/bindings/display/panel/ampire,am800480r3tmqwa1h.txt
new file mode 100644
index 000000000..83e2cae1c
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/ampire,am800480r3tmqwa1h.txt
@@ -0,0 +1,7 @@
+Ampire AM-800480R3TMQW-A1H 7.0" WVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "ampire,am800480r3tmqwa1h"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/auo,b080uan01.txt b/kernel/Documentation/devicetree/bindings/display/panel/auo,b080uan01.txt
new file mode 100644
index 000000000..bae0e2b51
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/auo,b080uan01.txt
@@ -0,0 +1,7 @@
+AU Optronics Corporation 8.0" WUXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,b101ean01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/auo,b101aw03.txt b/kernel/Documentation/devicetree/bindings/display/panel/auo,b101aw03.txt
new file mode 100644
index 000000000..72e088a4f
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/auo,b101aw03.txt
@@ -0,0 +1,7 @@
+AU Optronics Corporation 10.1" WSVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,b101aw03"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/auo,b101ean01.txt b/kernel/Documentation/devicetree/bindings/display/panel/auo,b101ean01.txt
new file mode 100644
index 000000000..3590b0741
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/auo,b101ean01.txt
@@ -0,0 +1,7 @@
+AU Optronics Corporation 10.1" WSVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,b101ean01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/auo,b101xtn01.txt b/kernel/Documentation/devicetree/bindings/display/panel/auo,b101xtn01.txt
new file mode 100644
index 000000000..889d511d6
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/auo,b101xtn01.txt
@@ -0,0 +1,7 @@
+AU Optronics Corporation 10.1" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,b101xtn01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/auo,b116xw03.txt b/kernel/Documentation/devicetree/bindings/display/panel/auo,b116xw03.txt
new file mode 100644
index 000000000..690d0a568
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/auo,b116xw03.txt
@@ -0,0 +1,7 @@
+AU Optronics Corporation 11.6" HD (1366x768) color TFT-LCD panel
+
+Required properties:
+- compatible: should be "auo,b116xw03"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/auo,b133htn01.txt b/kernel/Documentation/devicetree/bindings/display/panel/auo,b133htn01.txt
new file mode 100644
index 000000000..302226b5b
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/auo,b133htn01.txt
@@ -0,0 +1,7 @@
+AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel
+
+Required properties:
+- compatible: should be "auo,b133htn01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/auo,b133xtn01.txt b/kernel/Documentation/devicetree/bindings/display/panel/auo,b133xtn01.txt
new file mode 100644
index 000000000..7443b7c76
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/auo,b133xtn01.txt
@@ -0,0 +1,7 @@
+AU Optronics Corporation 13.3" WXGA (1366x768) TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,b133xtn01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/avic,tm070ddh03.txt b/kernel/Documentation/devicetree/bindings/display/panel/avic,tm070ddh03.txt
new file mode 100644
index 000000000..b6f2f3e8f
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/avic,tm070ddh03.txt
@@ -0,0 +1,7 @@
+Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel
+
+Required properties:
+- compatible: should be "avic,tm070ddh03"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wa01a.txt b/kernel/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wa01a.txt
new file mode 100644
index 000000000..f24614e4d
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wa01a.txt
@@ -0,0 +1,7 @@
+Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "chunghwa,claa101wa01a"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wb03.txt b/kernel/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wb03.txt
new file mode 100644
index 000000000..0ab2c05a4
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/chunghwa,claa101wb03.txt
@@ -0,0 +1,7 @@
+Chunghwa Picture Tubes Ltd. 10.1" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "chunghwa,claa101wb03"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/display-timing.txt b/kernel/Documentation/devicetree/bindings/display/panel/display-timing.txt
new file mode 100644
index 000000000..e1d4a0b59
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/display-timing.txt
@@ -0,0 +1,110 @@
+display-timing bindings
+=======================
+
+display-timings node
+--------------------
+
+required properties:
+ - none
+
+optional properties:
+ - native-mode: The native mode for the display, in case multiple modes are
+		provided. When omitted, assume the first node is the native.
+
+timing subnode
+--------------
+
+required properties:
+ - hactive, vactive: display resolution
+ - hfront-porch, hback-porch, hsync-len: horizontal display timing parameters
+   in pixels
+   vfront-porch, vback-porch, vsync-len: vertical display timing parameters in
+   lines
+ - clock-frequency: display clock in Hz
+
+optional properties:
+ - hsync-active: hsync pulse is active low/high/ignored
+ - vsync-active: vsync pulse is active low/high/ignored
+ - de-active: data-enable pulse is active low/high/ignored
+ - pixelclk-active: with
+			- active high = drive pixel data on rising edge/
+					sample data on falling edge
+			- active low  = drive pixel data on falling edge/
+					sample data on rising edge
+			- ignored     = ignored
+ - interlaced (bool): boolean to enable interlaced mode
+ - doublescan (bool): boolean to enable doublescan mode
+ - doubleclk (bool): boolean to enable doubleclock mode
+
+All the optional properties that are not bool follow the following logic:
+    <1>: high active
+    <0>: low active
+    omitted: not used on hardware
+
+There are different ways of describing the capabilities of a display. The
+devicetree representation corresponds to the one commonly found in datasheets
+for displays. If a display supports multiple signal timings, the native-mode
+can be specified.
+
+The parameters are defined as:
+
+  +----------+-------------------------------------+----------+-------+
+  |          |        ↑                            |          |       |
+  |          |        |vback_porch                 |          |       |
+  |          |        ↓                            |          |       |
+  +----------#######################################----------+-------+
+  |          #        ↑                            #          |       |
+  |          #        |                            #          |       |
+  |  hback   #        |                            #  hfront  | hsync |
+  |   porch  #        |       hactive              #  porch   |  len  |
+  |<-------->#<-------+--------------------------->#<-------->|<----->|
+  |          #        |                            #          |       |
+  |          #        |vactive                     #          |       |
+  |          #        |                            #          |       |
+  |          #        ↓                            #          |       |
+  +----------#######################################----------+-------+
+  |          |        ↑                            |          |       |
+  |          |        |vfront_porch                |          |       |
+  |          |        ↓                            |          |       |
+  +----------+-------------------------------------+----------+-------+
+  |          |        ↑                            |          |       |
+  |          |        |vsync_len                   |          |       |
+  |          |        ↓                            |          |       |
+  +----------+-------------------------------------+----------+-------+
+
+Example:
+
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: 1080p24 {
+			/* 1920x1080p24 */
+			clock-frequency = <52000000>;
+			hactive = <1920>;
+			vactive = <1080>;
+			hfront-porch = <25>;
+			hback-porch = <25>;
+			hsync-len = <25>;
+			vback-porch = <2>;
+			vfront-porch = <2>;
+			vsync-len = <2>;
+			hsync-active = <1>;
+		};
+	};
+
+Every required property also supports the use of ranges, so the commonly used
+datasheet description with minimum, typical and maximum values can be used.
+
+Example:
+
+	timing1: timing {
+		/* 1920x1080p24 */
+		clock-frequency = <148500000>;
+		hactive = <1920>;
+		vactive = <1080>;
+		hsync-len = <0 44 60>;
+		hfront-porch = <80 88 95>;
+		hback-porch = <100 148 160>;
+		vfront-porch = <0 4 6>;
+		vback-porch = <0 36 50>;
+		vsync-len = <0 5 6>;
+	};
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/edt,et057090dhu.txt b/kernel/Documentation/devicetree/bindings/display/panel/edt,et057090dhu.txt
new file mode 100644
index 000000000..4903d7b1d
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/edt,et057090dhu.txt
@@ -0,0 +1,7 @@
+Emerging Display Technology Corp. 5.7" VGA TFT LCD panel
+
+Required properties:
+- compatible: should be "edt,et057090dhu"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/edt,et070080dh6.txt b/kernel/Documentation/devicetree/bindings/display/panel/edt,et070080dh6.txt
new file mode 100644
index 000000000..20cb38e83
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/edt,et070080dh6.txt
@@ -0,0 +1,10 @@
+Emerging Display Technology Corp. ET070080DH6 7.0" WVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "edt,et070080dh6"
+
+This panel is the same as ETM0700G0DH6 except for the touchscreen.
+ET070080DH6 is the model with resistive touch.
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/edt,etm0700g0dh6.txt b/kernel/Documentation/devicetree/bindings/display/panel/edt,etm0700g0dh6.txt
new file mode 100644
index 000000000..ee4b18053
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/edt,etm0700g0dh6.txt
@@ -0,0 +1,10 @@
+Emerging Display Technology Corp. ETM0700G0DH6 7.0" WVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "edt,etm0700g0dh6"
+
+This panel is the same as ET070080DH6 except for the touchscreen.
+ETM0700G0DH6 is the model with capacitive multitouch.
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/foxlink,fl500wvr00-a0t.txt b/kernel/Documentation/devicetree/bindings/display/panel/foxlink,fl500wvr00-a0t.txt
new file mode 100644
index 000000000..b47f9d87b
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/foxlink,fl500wvr00-a0t.txt
@@ -0,0 +1,7 @@
+Foxlink Group 5" WVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "foxlink,fl500wvr00-a0t"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/giantplus,gpg482739qs5.txt b/kernel/Documentation/devicetree/bindings/display/panel/giantplus,gpg482739qs5.txt
new file mode 100644
index 000000000..24b0b6244
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/giantplus,gpg482739qs5.txt
@@ -0,0 +1,7 @@
+GiantPlus GPG48273QS5 4.3" (480x272) WQVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "giantplus,gpg48273qs5"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/hannstar,hsd070pww1.txt b/kernel/Documentation/devicetree/bindings/display/panel/hannstar,hsd070pww1.txt
new file mode 100644
index 000000000..7da1d5c03
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/hannstar,hsd070pww1.txt
@@ -0,0 +1,7 @@
+HannStar Display Corp. HSD070PWW1 7.0" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "hannstar,hsd070pww1"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/hannstar,hsd100pxn1.txt b/kernel/Documentation/devicetree/bindings/display/panel/hannstar,hsd100pxn1.txt
new file mode 100644
index 000000000..8270319a9
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/hannstar,hsd100pxn1.txt
@@ -0,0 +1,7 @@
+HannStar Display Corp. HSD100PXN1 10.1" XGA LVDS panel
+
+Required properties:
+- compatible: should be "hannstar,hsd100pxn1"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/hit,tx23d38vm0caa.txt b/kernel/Documentation/devicetree/bindings/display/panel/hit,tx23d38vm0caa.txt
new file mode 100644
index 000000000..04caaae19
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/hit,tx23d38vm0caa.txt
@@ -0,0 +1,7 @@
+Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel
+
+Required properties:
+- compatible: should be "hit,tx23d38vm0caa"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/innolux,at043tn24.txt b/kernel/Documentation/devicetree/bindings/display/panel/innolux,at043tn24.txt
new file mode 100644
index 000000000..4104226b6
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/innolux,at043tn24.txt
@@ -0,0 +1,7 @@
+Innolux AT043TN24 4.3" WQVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,at043tn24"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/innolux,g121i1-l01.txt b/kernel/Documentation/devicetree/bindings/display/panel/innolux,g121i1-l01.txt
new file mode 100644
index 000000000..2743b07cd
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/innolux,g121i1-l01.txt
@@ -0,0 +1,7 @@
+Innolux Corporation 12.1" WXGA (1280x800) TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,g121i1-l01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/innolux,n116bge.txt b/kernel/Documentation/devicetree/bindings/display/panel/innolux,n116bge.txt
new file mode 100644
index 000000000..081bb939e
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/innolux,n116bge.txt
@@ -0,0 +1,7 @@
+Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,n116bge"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/innolux,n156bge-l21.txt b/kernel/Documentation/devicetree/bindings/display/panel/innolux,n156bge-l21.txt
new file mode 100644
index 000000000..7825844aa
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/innolux,n156bge-l21.txt
@@ -0,0 +1,7 @@
+InnoLux 15.6" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,n156bge-l21"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/innolux,zj070na-01p.txt b/kernel/Documentation/devicetree/bindings/display/panel/innolux,zj070na-01p.txt
new file mode 100644
index 000000000..824f87f15
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/innolux,zj070na-01p.txt
@@ -0,0 +1,7 @@
+Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,zj070na-01p"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/lg,lb070wv8.txt b/kernel/Documentation/devicetree/bindings/display/panel/lg,lb070wv8.txt
new file mode 100644
index 000000000..a7588e525
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/lg,lb070wv8.txt
@@ -0,0 +1,7 @@
+LG 7" (800x480 pixels) TFT LCD panel
+
+Required properties:
+- compatible: should be "lg,lb070wv8"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.txt b/kernel/Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.txt
new file mode 100644
index 000000000..5e649cb9a
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.txt
@@ -0,0 +1,7 @@
+LG Corporation 7" WXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "lg,ld070wx3-sl01"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/lg,lg4573.txt b/kernel/Documentation/devicetree/bindings/display/panel/lg,lg4573.txt
new file mode 100644
index 000000000..824441f4e
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/lg,lg4573.txt
@@ -0,0 +1,19 @@
+LG LG4573 TFT Liquid Crystal Display with SPI control bus
+
+Required properties:
+  - compatible: "lg,lg4573"
+  - reg: address of the panel on the SPI bus
+
+The panel must obey rules for SPI slave device specified in document [1].
+
+[1]: Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+
+	lcd_panel: display@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lg,lg4573";
+		spi-max-frequency = <10000000>;
+		reg = <0>;
+	};
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/lg,lh500wx1-sd03.txt b/kernel/Documentation/devicetree/bindings/display/panel/lg,lh500wx1-sd03.txt
new file mode 100644
index 000000000..a04fd2b2e
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/lg,lh500wx1-sd03.txt
@@ -0,0 +1,7 @@
+LG Corporation 5" HD TFT LCD panel
+
+Required properties:
+- compatible: should be "lg,lh500wx1-sd03"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/lg,lp129qe.txt b/kernel/Documentation/devicetree/bindings/display/panel/lg,lp129qe.txt
new file mode 100644
index 000000000..9f262e0c5
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/lg,lp129qe.txt
@@ -0,0 +1,7 @@
+LG 12.9" (2560x1700 pixels) TFT LCD panel
+
+Required properties:
+- compatible: should be "lg,lp129qe"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.txt b/kernel/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.txt
new file mode 100644
index 000000000..1a1e653e5
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.txt
@@ -0,0 +1,33 @@
+LG.Philips LB035Q02 Panel
+=========================
+
+Required properties:
+- compatible: "lgphilips,lb035q02"
+- enable-gpios: panel enable gpio
+
+Optional properties:
+- label: a symbolic name for the panel
+
+Required nodes:
+- Video port for DPI input
+
+Example
+-------
+
+lcd-panel: panel@0 {
+	compatible = "lgphilips,lb035q02";
+	reg = <0>;
+	spi-max-frequency = <100000>;
+	spi-cpol;
+	spi-cpha;
+
+	label = "lcd";
+
+	enable-gpios = <&gpio7 7 0>;
+
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&dpi_out>;
+		};
+	};
+};
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/nec,nl4827hc19-05b.txt b/kernel/Documentation/devicetree/bindings/display/panel/nec,nl4827hc19-05b.txt
new file mode 100644
index 000000000..8e1914d1e
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/nec,nl4827hc19-05b.txt
@@ -0,0 +1,7 @@
+NEC LCD Technologies,Ltd. WQVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "nec,nl4827hc19-05b"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/okaya,rs800480t-7x0gp.txt b/kernel/Documentation/devicetree/bindings/display/panel/okaya,rs800480t-7x0gp.txt
new file mode 100644
index 000000000..ddf8e211d
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/okaya,rs800480t-7x0gp.txt
@@ -0,0 +1,7 @@
+OKAYA Electric America, Inc. RS800480T-7X0GP 7" WVGA LCD panel
+
+Required properties:
+- compatible: should be "okaya,rs800480t-7x0gp"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/ortustech,com43h4m85ulc.txt b/kernel/Documentation/devicetree/bindings/display/panel/ortustech,com43h4m85ulc.txt
new file mode 100644
index 000000000..de19e9398
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/ortustech,com43h4m85ulc.txt
@@ -0,0 +1,7 @@
+OrtusTech COM43H4M85ULC Blanview 3.7" TFT-LCD panel
+
+Required properties:
+- compatible: should be "ortustech,com43h4m85ulc"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f004b00.txt b/kernel/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f004b00.txt
new file mode 100644
index 000000000..d328b0341
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f004b00.txt
@@ -0,0 +1,7 @@
+Panasonic Corporation 10.1" WUXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "panasonic,vvx10f004b00"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/panel-dpi.txt b/kernel/Documentation/devicetree/bindings/display/panel/panel-dpi.txt
new file mode 100644
index 000000000..216c894d4
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/panel-dpi.txt
@@ -0,0 +1,45 @@
+Generic MIPI DPI Panel
+======================
+
+Required properties:
+- compatible: "panel-dpi"
+
+Optional properties:
+- label: a symbolic name for the panel
+- enable-gpios: panel enable gpio
+
+Required nodes:
+- "panel-timing" containing video timings
+  (Documentation/devicetree/bindings/display/display-timing.txt)
+- Video port for DPI input
+
+Example
+-------
+
+lcd0: display@0 {
+        compatible = "samsung,lte430wq-f0c", "panel-dpi";
+        label = "lcd";
+
+        port {
+            lcd_in: endpoint {
+                    remote-endpoint = <&dpi_out>;
+            };
+        };
+
+        panel-timing {
+                clock-frequency = <9200000>;
+                hactive = <480>;
+                vactive = <272>;
+                hfront-porch = <8>;
+                hback-porch = <4>;
+                hsync-len = <41>;
+                vback-porch = <2>;
+                vfront-porch = <4>;
+                vsync-len = <10>;
+
+                hsync-active = <0>;
+                vsync-active = <0>;
+                de-active = <1>;
+                pixelclk-active = <1>;
+        };
+};
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt b/kernel/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt
new file mode 100644
index 000000000..dce48eb9d
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/panel-dsi-cm.txt
@@ -0,0 +1,29 @@
+Generic MIPI DSI Command Mode Panel
+===================================
+
+Required properties:
+- compatible: "panel-dsi-cm"
+
+Optional properties:
+- label: a symbolic name for the panel
+- reset-gpios: panel reset gpio
+- te-gpios: panel TE gpio
+
+Required nodes:
+- Video port for DSI input
+
+Example
+-------
+
+lcd0: display {
+	compatible = "tpo,taal", "panel-dsi-cm";
+	label = "lcd0";
+
+	reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+
+	port {
+		lcd0_in: endpoint {
+			remote-endpoint = <&dsi1_out_ep>;
+		};
+	};
+};
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt b/kernel/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt
new file mode 100644
index 000000000..fc595d9b9
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/samsung,ld9040.txt
@@ -0,0 +1,66 @@
+Samsung LD9040 AMOLED LCD parallel RGB panel with SPI control bus
+
+Required properties:
+  - compatible: "samsung,ld9040"
+  - reg: address of the panel on SPI bus
+  - vdd3-supply: core voltage supply
+  - vci-supply: voltage supply for analog circuits
+  - reset-gpios: a GPIO spec for the reset pin
+  - display-timings: timings for the connected panel according to [1]
+
+The panel must obey rules for SPI slave device specified in document [2].
+
+Optional properties:
+  - power-on-delay: delay after turning regulators on [ms]
+  - reset-delay: delay after reset sequence [ms]
+  - panel-width-mm: physical panel width [mm]
+  - panel-height-mm: physical panel height [mm]
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in [3]. This
+node should describe panel's video bus.
+
+[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[2]: Documentation/devicetree/bindings/spi/spi-bus.txt
+[3]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+	lcd@0 {
+		compatible = "samsung,ld9040";
+		reg = <0>;
+		vdd3-supply = <&ldo7_reg>;
+		vci-supply = <&ldo17_reg>;
+		reset-gpios = <&gpy4 5 0>;
+		spi-max-frequency = <1200000>;
+		spi-cpol;
+		spi-cpha;
+		power-on-delay = <10>;
+		reset-delay = <10>;
+		panel-width-mm = <90>;
+		panel-height-mm = <154>;
+
+		display-timings {
+			timing {
+				clock-frequency = <23492370>;
+				hactive = <480>;
+				vactive = <800>;
+				hback-porch = <16>;
+				hfront-porch = <16>;
+				vback-porch = <2>;
+				vfront-porch = <28>;
+				hsync-len = <2>;
+				vsync-len = <1>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <0>;
+				pixelclk-active = <0>;
+			};
+		};
+
+		port {
+			lcd_ep: endpoint {
+				remote-endpoint = <&fimd_dpi_ep>;
+			};
+		};
+	};
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/samsung,ltn101nt05.txt b/kernel/Documentation/devicetree/bindings/display/panel/samsung,ltn101nt05.txt
new file mode 100644
index 000000000..ef522c6bb
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/samsung,ltn101nt05.txt
@@ -0,0 +1,7 @@
+Samsung Electronics 10.1" WSVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "samsung,ltn101nt05"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/samsung,ltn140at29-301.txt b/kernel/Documentation/devicetree/bindings/display/panel/samsung,ltn140at29-301.txt
new file mode 100644
index 000000000..e7f969d89
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/samsung,ltn140at29-301.txt
@@ -0,0 +1,7 @@
+Samsung Electronics 14" WXGA (1366x768) TFT LCD panel
+
+Required properties:
+- compatible: should be "samsung,ltn140at29-301"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt b/kernel/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt
new file mode 100644
index 000000000..25701c81b
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.txt
@@ -0,0 +1,56 @@
+Samsung S6E8AA0 AMOLED LCD 5.3 inch panel
+
+Required properties:
+  - compatible: "samsung,s6e8aa0"
+  - reg: the virtual channel number of a DSI peripheral
+  - vdd3-supply: core voltage supply
+  - vci-supply: voltage supply for analog circuits
+  - reset-gpios: a GPIO spec for the reset pin
+  - display-timings: timings for the connected panel as described by [1]
+
+Optional properties:
+  - power-on-delay: delay after turning regulators on [ms]
+  - reset-delay: delay after reset sequence [ms]
+  - init-delay: delay after initialization sequence [ms]
+  - panel-width-mm: physical panel width [mm]
+  - panel-height-mm: physical panel height [mm]
+  - flip-horizontal: boolean to flip image horizontally
+  - flip-vertical: boolean to flip image vertically
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in [2]. This
+node should describe panel's video bus.
+
+[1]: Documentation/devicetree/bindings/display/display-timing.txt
+[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+	panel {
+		compatible = "samsung,s6e8aa0";
+		reg = <0>;
+		vdd3-supply = <&vcclcd_reg>;
+		vci-supply = <&vlcd_reg>;
+		reset-gpios = <&gpy4 5 0>;
+		power-on-delay= <50>;
+		reset-delay = <100>;
+		init-delay = <100>;
+		panel-width-mm = <58>;
+		panel-height-mm = <103>;
+		flip-horizontal;
+		flip-vertical;
+
+		display-timings {
+			timing0: timing-0 {
+				clock-frequency = <57153600>;
+				hactive = <720>;
+				vactive = <1280>;
+				hfront-porch = <5>;
+				hback-porch = <5>;
+				hsync-len = <5>;
+				vfront-porch = <13>;
+				vback-porch = <1>;
+				vsync-len = <2>;
+			};
+		};
+	};
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.txt b/kernel/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.txt
new file mode 100644
index 000000000..f522bb8e4
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/sharp,lq101r1sx01.txt
@@ -0,0 +1,49 @@
+Sharp Microelectronics 10.1" WQXGA TFT LCD panel
+
+This panel requires a dual-channel DSI host to operate. It supports two modes:
+- left-right: each channel drives the left or right half of the screen
+- even-odd: each channel drives the even or odd lines of the screen
+
+Each of the DSI channels controls a separate DSI peripheral. The peripheral
+driven by the first link (DSI-LINK1), left or even, is considered the primary
+peripheral and controls the device. The 'link2' property contains a phandle
+to the peripheral driven by the second link (DSI-LINK2, right or odd).
+
+Note that in video mode the DSI-LINK1 interface always provides the left/even
+pixels and DSI-LINK2 always provides the right/odd pixels. In command mode it
+is possible to program either link to drive the left/even or right/odd pixels
+but for the sake of consistency this binding assumes that the same assignment
+is chosen as for video mode.
+
+Required properties:
+- compatible: should be "sharp,lq101r1sx01"
+- reg: DSI virtual channel of the peripheral
+
+Required properties (for DSI-LINK1 only):
+- link2: phandle to the DSI peripheral on the secondary link. Note that the
+  presence of this property marks the containing node as DSI-LINK1.
+- power-supply: phandle of the regulator that provides the supply voltage
+
+Optional properties (for DSI-LINK1 only):
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+	dsi@54300000 {
+		panel: panel@0 {
+			compatible = "sharp,lq101r1sx01";
+			reg = <0>;
+
+			link2 = <&secondary>;
+
+			power-supply = <...>;
+			backlight = <...>;
+		};
+	};
+
+	dsi@54400000 {
+		secondary: panel@0 {
+			compatible = "sharp,lq101r1sx01";
+			reg = <0>;
+		};
+	};
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/sharp,ls037v7dw01.txt b/kernel/Documentation/devicetree/bindings/display/panel/sharp,ls037v7dw01.txt
new file mode 100644
index 000000000..0cc8981e9
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/sharp,ls037v7dw01.txt
@@ -0,0 +1,43 @@
+SHARP LS037V7DW01 TFT-LCD panel
+===================================
+
+Required properties:
+- compatible: "sharp,ls037v7dw01"
+
+Optional properties:
+- label: a symbolic name for the panel
+- enable-gpios: a GPIO spec for the optional enable pin.
+  This pin is the INI pin as specified in the LS037V7DW01.pdf file.
+- reset-gpios: a GPIO spec for the optional reset pin.
+  This pin is the RESB pin as specified in the LS037V7DW01.pdf file.
+- mode-gpios: a GPIO
+  ordered MO, LR, and UD as specified in the LS037V7DW01.pdf file.
+
+Required nodes:
+- Video port for DPI input
+
+This panel can have zero to five GPIOs to configure to change configuration
+between QVGA and VGA mode and the scan direction. As these pins can be also
+configured with external pulls, all the GPIOs are considered optional with holes
+in the array.
+
+Example
+-------
+
+Example when connected to a omap2+ based device:
+
+lcd0: display {
+	compatible = "sharp,ls037v7dw01";
+	power-supply = <&lcd_3v3>;
+	enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;	/* gpio152, lcd INI */
+	reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd RESB */
+	mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH	/* gpio154, lcd MO */
+		      &gpio1 2 GPIO_ACTIVE_HIGH		/* gpio2, lcd LR */
+		      &gpio1 3 GPIO_ACTIVE_HIGH>;	/* gpio3, lcd UD */
+
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&dpi_out>;
+		};
+	};
+};
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/shelly,sca07010-bfn-lnn.txt b/kernel/Documentation/devicetree/bindings/display/panel/shelly,sca07010-bfn-lnn.txt
new file mode 100644
index 000000000..fc1ea9e26
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/shelly,sca07010-bfn-lnn.txt
@@ -0,0 +1,7 @@
+Shelly SCA07010-BFN-LNN 7.0" WVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "shelly,sca07010-bfn-lnn"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/simple-panel.txt b/kernel/Documentation/devicetree/bindings/display/panel/simple-panel.txt
new file mode 100644
index 000000000..1341bbf4a
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/simple-panel.txt
@@ -0,0 +1,21 @@
+Simple display panel
+
+Required properties:
+- power-supply: regulator to provide the supply voltage
+
+Optional properties:
+- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
+- enable-gpios: GPIO pin to enable or disable the panel
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+	panel: panel {
+		compatible = "cptt,claa101wb01";
+		ddc-i2c-bus = <&panelddc>;
+
+		power-supply = <&vdd_pnl_reg>;
+		enable-gpios = <&gpio 90 0>;
+
+		backlight = <&backlight>;
+	};
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/sony,acx565akm.txt b/kernel/Documentation/devicetree/bindings/display/panel/sony,acx565akm.txt
new file mode 100644
index 000000000..e12333280
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/sony,acx565akm.txt
@@ -0,0 +1,30 @@
+Sony ACX565AKM SDI Panel
+========================
+
+Required properties:
+- compatible: "sony,acx565akm"
+
+Optional properties:
+- label: a symbolic name for the panel
+- reset-gpios: panel reset gpio
+
+Required nodes:
+- Video port for SDI input
+
+Example
+-------
+
+acx565akm@2 {
+	compatible = "sony,acx565akm";
+	spi-max-frequency = <6000000>;
+	reg = <2>;
+
+	label = "lcd";
+	reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
+
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&sdi_out>;
+		};
+	};
+};
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/toppoly,td028ttec1.txt b/kernel/Documentation/devicetree/bindings/display/panel/toppoly,td028ttec1.txt
new file mode 100644
index 000000000..7175dc374
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/toppoly,td028ttec1.txt
@@ -0,0 +1,30 @@
+Toppoly TD028TTEC1 Panel
+========================
+
+Required properties:
+- compatible: "toppoly,td028ttec1"
+
+Optional properties:
+- label: a symbolic name for the panel
+
+Required nodes:
+- Video port for DPI input
+
+Example
+-------
+
+lcd-panel: td028ttec1@0 {
+	compatible = "toppoly,td028ttec1";
+	reg = <0>;
+	spi-max-frequency = <100000>;
+	spi-cpol;
+	spi-cpha;
+
+	label = "lcd";
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&dpi_out>;
+		};
+	};
+};
+
diff --git a/kernel/Documentation/devicetree/bindings/display/panel/tpo,td043mtea1.txt b/kernel/Documentation/devicetree/bindings/display/panel/tpo,td043mtea1.txt
new file mode 100644
index 000000000..ec6d62975
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/panel/tpo,td043mtea1.txt
@@ -0,0 +1,33 @@
+TPO TD043MTEA1 Panel
+====================
+
+Required properties:
+- compatible: "tpo,td043mtea1"
+- reset-gpios: panel reset gpio
+
+Optional properties:
+- label: a symbolic name for the panel
+
+Required nodes:
+- Video port for DPI input
+
+Example
+-------
+
+lcd-panel: panel@0 {
+	compatible = "tpo,td043mtea1";
+	reg = <0>;
+	spi-max-frequency = <100000>;
+	spi-cpol;
+	spi-cpha;
+
+	label = "lcd";
+
+	reset-gpios = <&gpio7 7 0>;
+
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&dpi_out>;
+		};
+	};
+};