These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

4 files changed, 125 insertions, 0 deletions

diff --git a/kernel/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt b/kernel/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt
new file mode 100644
index 000000000..0c0970c21
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/connector/analog-tv-connector.txt
@@ -0,0 +1,25 @@
+Analog TV Connector
+===================
+
+Required properties:
+- compatible: "composite-video-connector" or "svideo-connector"
+
+Optional properties:
+- label: a symbolic name for the connector
+
+Required nodes:
+- Video port for TV input
+
+Example
+-------
+
+tv: connector {
+	compatible = "composite-video-connector";
+	label = "tv";
+
+	port {
+		tv_connector_in: endpoint {
+			remote-endpoint = <&venc_out>;
+		};
+	};
+};
diff --git a/kernel/Documentation/devicetree/bindings/display/connector/dvi-connector.txt b/kernel/Documentation/devicetree/bindings/display/connector/dvi-connector.txt
new file mode 100644
index 000000000..fc53f7c60
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/connector/dvi-connector.txt
@@ -0,0 +1,35 @@
+DVI Connector
+==============
+
+Required properties:
+- compatible: "dvi-connector"
+
+Optional properties:
+- label: a symbolic name for the connector
+- ddc-i2c-bus: phandle to the i2c bus that is connected to DVI DDC
+- analog: the connector has DVI analog pins
+- digital: the connector has DVI digital pins
+- dual-link: the connector has pins for DVI dual-link
+
+Required nodes:
+- Video port for DVI input
+
+Note: One (or both) of 'analog' or 'digital' must be set.
+
+Example
+-------
+
+dvi0: connector@0 {
+	compatible = "dvi-connector";
+	label = "dvi";
+
+	digital;
+
+	ddc-i2c-bus = <&i2c3>;
+
+	port {
+		dvi_connector_in: endpoint {
+			remote-endpoint = <&tfp410_out>;
+		};
+	};
+};
diff --git a/kernel/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt b/kernel/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt
new file mode 100644
index 000000000..acd5668b1
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt
@@ -0,0 +1,29 @@
+HDMI Connector
+==============
+
+Required properties:
+- compatible: "hdmi-connector"
+- type: the HDMI connector type: "a", "b", "c", "d" or "e"
+
+Optional properties:
+- label: a symbolic name for the connector
+- hpd-gpios: HPD GPIO number
+
+Required nodes:
+- Video port for HDMI input
+
+Example
+-------
+
+hdmi0: connector@1 {
+	compatible = "hdmi-connector";
+	label = "hdmi";
+
+	type = "a";
+
+	port {
+		hdmi_connector_in: endpoint {
+			remote-endpoint = <&tpd12s015_out>;
+		};
+	};
+};
diff --git a/kernel/Documentation/devicetree/bindings/display/connector/vga-connector.txt b/kernel/Documentation/devicetree/bindings/display/connector/vga-connector.txt
new file mode 100644
index 000000000..c727f298e
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/display/connector/vga-connector.txt
@@ -0,0 +1,36 @@
+VGA Connector
+=============
+
+Required properties:
+
+- compatible: "vga-connector"
+
+Optional properties:
+
+- label: a symbolic name for the connector corresponding to a hardware label
+- ddc-i2c-bus: phandle to the I2C bus that is connected to VGA DDC
+
+Required nodes:
+
+The VGA connector internal connections are modeled using the OF graph bindings
+specified in Documentation/devicetree/bindings/graph.txt.
+
+The VGA connector has a single port that must be connected to a video source
+port.
+
+
+Example
+-------
+
+vga0: connector@0 {
+	compatible = "vga-connector";
+	label = "vga";
+
+	ddc-i2c-bus = <&i2c3>;
+
+	port {
+		vga_connector_in: endpoint {
+			remote-endpoint = <&adv7123_out>;
+		};
+	};
+};