Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

15 files changed, 578 insertions, 0 deletions

diff --git a/kernel/Documentation/devicetree/bindings/ata/ahci-platform.txt b/kernel/Documentation/devicetree/bindings/ata/ahci-platform.txt
new file mode 100644
index 000000000..c2340eeeb
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -0,0 +1,80 @@
+* AHCI SATA Controller
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+Each SATA controller should have its own node.
+
+It is possible, but not required, to represent each port as a sub-node.
+It allows to enable each port independently when dealing with multiple
+PHYs.
+
+Required properties:
+- compatible        : compatible string, one of:
+  - "allwinner,sun4i-a10-ahci"
+  - "hisilicon,hisi-ahci"
+  - "ibm,476gtr-ahci"
+  - "marvell,armada-380-ahci"
+  - "snps,dwc-ahci"
+  - "snps,exynos5440-ahci"
+  - "snps,spear-ahci"
+  - "generic-ahci"
+- interrupts        : <interrupt mapping for SATA IRQ>
+- reg               : <registers mapping>
+
+Please note that when using "generic-ahci" you must also specify a SoC specific
+compatible:
+	compatible = "manufacturer,soc-model-ahci", "generic-ahci";
+
+Optional properties:
+- dma-coherent      : Present if dma operations are coherent
+- clocks            : a list of phandle + clock specifier pairs
+- target-supply     : regulator for SATA target power
+- phys              : reference to the SATA PHY node
+- phy-names         : must be "sata-phy"
+
+Required properties when using sub-nodes:
+- #address-cells    : number of cells to encode an address
+- #size-cells       : number of cells representing the size of an address
+
+
+Sub-nodes required properties:
+- reg		    : the port number
+And at least one of the following properties:
+- phys		    : reference to the SATA PHY node
+- target-supply    : regulator for SATA target power
+
+Examples:
+        sata@ffe08000 {
+		compatible = "snps,spear-ahci";
+		reg = <0xffe08000 0x1000>;
+		interrupts = <115>;
+        };
+
+	ahci: sata@01c18000 {
+		compatible = "allwinner,sun4i-a10-ahci";
+		reg = <0x01c18000 0x1000>;
+		interrupts = <56>;
+		clocks = <&pll6 0>, <&ahb_gates 25>;
+		target-supply = <&reg_ahci_5v>;
+	};
+
+With sub-nodes:
+	sata@f7e90000 {
+		compatible = "marvell,berlin2q-achi", "generic-ahci";
+		reg = <0xe90000 0x1000>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&chip CLKID_SATA>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sata0: sata-port@0 {
+			reg = <0>;
+			phys = <&sata_phy 0>;
+			target-supply = <&reg_sata0>;
+		};
+
+		sata1: sata-port@1 {
+			reg = <1>;
+			phys = <&sata_phy 1>;
+			target-supply = <&reg_sata1>;;
+		};
+	};
diff --git a/kernel/Documentation/devicetree/bindings/ata/ahci-st.txt b/kernel/Documentation/devicetree/bindings/ata/ahci-st.txt
new file mode 100644
index 000000000..e1d01df8e
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/ata/ahci-st.txt
@@ -0,0 +1,50 @@
+STMicroelectronics STi SATA controller
+
+This binding describes a SATA device.
+
+Required properties:
+ - compatible	   : Must be "st,ahci"
+ - reg		   : Physical base addresses and length of register sets
+ - interrupts	   : Interrupt associated with the SATA device
+ - interrupt-names :   Associated name must be; "hostc"
+ - clocks	   : The phandle for the clock
+ - clock-names	   :   Associated name must be; "ahci_clk"
+ - phys		   : The phandle for the PHY port
+ - phy-names	   :   Associated name must be; "ahci_phy"
+
+Optional properties:
+ - resets	   : The power-down, soft-reset and power-reset lines of SATA IP
+ - reset-names	   :   Associated names must be; "pwr-dwn", "sw-rst" and "pwr-rst"
+
+Example:
+
+	/* Example for stih416 */
+	sata0: sata@fe380000 {
+		compatible	= "st,ahci";
+		reg		= <0xfe380000 0x1000>;
+		interrupts	= <GIC_SPI 157 IRQ_TYPE_NONE>;
+		interrupt-names	= "hostc";
+		phys		= <&phy_port0 PHY_TYPE_SATA>;
+		phy-names	= "ahci_phy";
+		resets		= <&powerdown STIH416_SATA0_POWERDOWN>,
+				  <&softreset STIH416_SATA0_SOFTRESET>;
+		reset-names	= "pwr-dwn", "sw-rst";
+		clocks		= <&clk_s_a0_ls CLK_ICN_REG>;
+		clock-names	= "ahci_clk";
+	};
+
+	/* Example for stih407 family silicon */
+	sata0: sata@9b20000 {
+		compatible	= "st,ahci";
+		reg		= <0x9b20000 0x1000>;
+		interrupts	= <GIC_SPI 159 IRQ_TYPE_NONE>;
+		interrupt-names	= "hostc";
+		phys		= <&phy_port0 PHY_TYPE_SATA>;
+		phy-names	= "ahci_phy";
+		resets		= <&powerdown STIH407_SATA0_POWERDOWN>,
+				  <&softreset STIH407_SATA0_SOFTRESET>,
+				  <&softreset STIH407_SATA0_PWR_SOFTRESET>;
+		reset-names	= "pwr-dwn", "sw-rst", "pwr-rst";
+		clocks		= <&clk_s_c0_flexgen CLK_ICN_REG>;
+		clock-names	= "ahci_clk";
+	};
diff --git a/kernel/Documentation/devicetree/bindings/ata/apm-xgene.txt b/kernel/Documentation/devicetree/bindings/ata/apm-xgene.txt
new file mode 100644
index 000000000..a668f0e7d
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/ata/apm-xgene.txt
@@ -0,0 +1,79 @@
+* APM X-Gene 6.0 Gb/s SATA host controller nodes
+
+SATA host controller nodes are defined to describe on-chip Serial ATA
+controllers. Each SATA controller (pair of ports) have its own node.
+
+Required properties:
+- compatible		: Shall contain:
+  * "apm,xgene-ahci"
+- reg			: First memory resource shall be the AHCI memory
+			  resource.
+			  Second memory resource shall be the host controller
+			  core memory resource.
+			  Third memory resource shall be the host controller
+			  diagnostic memory resource.
+			  4th memory resource shall be the host controller
+			  AXI memory resource.
+			  5th optional memory resource shall be the host
+			  controller MUX memory resource if required.
+- interrupts		: Interrupt-specifier for SATA host controller IRQ.
+- clocks		: Reference to the clock entry.
+- phys			: A list of phandles + phy-specifiers, one for each
+			  entry in phy-names.
+- phy-names		: Should contain:
+  * "sata-phy" for the SATA 6.0Gbps PHY
+
+Optional properties:
+- dma-coherent		: Present if dma operations are coherent
+- status		: Shall be "ok" if enabled or "disabled" if disabled.
+			  Default is "ok".
+
+Example:
+		sataclk: sataclk {
+			compatible = "fixed-clock";
+			#clock-cells = <1>;
+			clock-frequency = <100000000>;
+			clock-output-names = "sataclk";
+		};
+
+		phy2: phy@1f22a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f22a000 0x0 0x100>;
+			#phy-cells = <1>;
+		};
+
+		phy3: phy@1f23a000 {
+			compatible = "apm,xgene-phy";
+			reg = <0x0 0x1f23a000 0x0 0x100>;
+			#phy-cells = <1>;
+		};
+
+		sata2: sata@1a400000 {
+			compatible = "apm,xgene-ahci";
+			reg = <0x0 0x1a400000 0x0 0x1000>,
+			      <0x0 0x1f220000 0x0 0x1000>,
+			      <0x0 0x1f22d000 0x0 0x1000>,
+			      <0x0 0x1f22e000 0x0 0x1000>,
+			      <0x0 0x1f227000 0x0 0x1000>;
+			interrupts = <0x0 0x87 0x4>;
+			dma-coherent;
+			status = "ok";
+			clocks = <&sataclk 0>;
+			phys = <&phy2 0>;
+			phy-names = "sata-phy";
+		};
+
+		sata3: sata@1a800000 {
+			compatible = "apm,xgene-ahci-pcie";
+			reg = <0x0 0x1a800000 0x0 0x1000>,
+			      <0x0 0x1f230000 0x0 0x1000>,
+			      <0x0 0x1f23d000 0x0 0x1000>,
+			      <0x0 0x1f23e000 0x0 0x1000>,
+			      <0x0 0x1f237000 0x0 0x1000>;
+			interrupts = <0x0 0x88 0x4>;
+			dma-coherent;
+			status = "ok";
+			clocks = <&sataclk 0>;
+			phys = <&phy3 0>;
+			phy-names = "sata-phy";
+		};
diff --git a/kernel/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt b/kernel/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt
new file mode 100644
index 000000000..c1d22b3ae
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/ata/atmel-at91_cf.txt
@@ -0,0 +1,19 @@
+Atmel AT91RM9200 CompactFlash
+
+Required properties:
+- compatible : "atmel,at91rm9200-cf".
+- reg : should specify localbus address and size used.
+- gpios : specifies the gpio pins to control the CF device. Detect
+  and reset gpio's are mandatory while irq and vcc gpio's are
+  optional and may be set to 0 if not present.
+
+Example:
+compact-flash@50000000 {
+	compatible = "atmel,at91rm9200-cf";
+	reg = <0x50000000 0x30000000>;
+	gpios = <&pioC 13 0	/* irq */
+		 &pioC 15 0 	/* detect */
+		 0		/* vcc */
+		 &pioC  5 0	/* reset */
+		>;
+};
diff --git a/kernel/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt b/kernel/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
new file mode 100644
index 000000000..3bacc8e09
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
@@ -0,0 +1,30 @@
+* Compact Flash
+
+The Cavium Compact Flash device is connected to the Octeon Boot Bus,
+and is thus a child of the Boot Bus device.  It can read and write
+industry standard compact flash devices.
+
+Properties:
+- compatible: "cavium,ebt3000-compact-flash";
+
+  Compatibility with many Cavium evaluation boards.
+
+- reg: The base address of the CF chip select banks.  Depending on
+  the device configuration, there may be one or two banks.
+
+- cavium,bus-width: The width of the connection to the CF devices.  Valid
+  values are 8 and 16.
+
+- cavium,true-ide: Optional, if present the CF connection is in True IDE mode.
+
+- cavium,dma-engine-handle: Optional, a phandle for the DMA Engine connected
+  to this device.
+
+Example:
+	compact-flash@5,0 {
+		compatible = "cavium,ebt3000-compact-flash";
+		reg = <5 0 0x10000>, <6 0 0x10000>;
+		cavium,bus-width = <16>;
+		cavium,true-ide;
+		cavium,dma-engine-handle = <&dma0>;
+	};
diff --git a/kernel/Documentation/devicetree/bindings/ata/exynos-sata.txt b/kernel/Documentation/devicetree/bindings/ata/exynos-sata.txt
new file mode 100644
index 000000000..cb4844824
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/ata/exynos-sata.txt
@@ -0,0 +1,30 @@
+* Samsung AHCI SATA Controller
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+Each SATA controller should have its own node.
+
+Required properties:
+- compatible		: compatible list, contains "samsung,exynos5-sata"
+- interrupts		: <interrupt mapping for SATA IRQ>
+- reg			: <registers mapping>
+- samsung,sata-freq	: <frequency in MHz>
+- phys			: Must contain exactly one entry as specified
+			  in phy-bindings.txt
+- phy-names		: Must be "sata-phy"
+
+Optional properties:
+- clocks		: Must contain an entry for each entry in clock-names.
+- clock-names		: Shall be "sata" for the external SATA bus clock,
+			  and "sclk_sata" for the internal controller clock.
+
+Example:
+	sata@122f0000 {
+		compatible = "snps,dwc-ahci";
+		samsung,sata-freq = <66>;
+		reg = <0x122f0000 0x1ff>;
+		interrupts = <0 115 0>;
+		clocks = <&clock 277>, <&clock 143>;
+		clock-names = "sata", "sclk_sata";
+		phys = <&sata_phy>;
+		phy-names = "sata-phy";
+	};
diff --git a/kernel/Documentation/devicetree/bindings/ata/fsl-sata.txt b/kernel/Documentation/devicetree/bindings/ata/fsl-sata.txt
new file mode 100644
index 000000000..b46bcf46c
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/ata/fsl-sata.txt
@@ -0,0 +1,29 @@
+* Freescale 8xxx/3.0 Gb/s SATA nodes
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+Each SATA port should have its own node.
+
+Required properties:
+- compatible        : compatible list, contains 2 entries, first is
+		 "fsl,CHIP-sata", where CHIP is the processor
+		 (mpc8315, mpc8379, etc.) and the second is
+		 "fsl,pq-sata"
+- interrupts        : <interrupt mapping for SATA IRQ>
+- cell-index        : controller index.
+                          1 for controller @ 0x18000
+                          2 for controller @ 0x19000
+                          3 for controller @ 0x1a000
+                          4 for controller @ 0x1b000
+
+Optional properties:
+- interrupt-parent  : optional, if needed for interrupt mapping
+- reg               : <registers mapping>
+
+Example:
+	sata@18000 {
+		compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+		reg = <0x18000 0x1000>;
+		cell-index = <1>;
+		interrupts = <2c 8>;
+		interrupt-parent = < &ipic >;
+	};
diff --git a/kernel/Documentation/devicetree/bindings/ata/imx-pata.txt b/kernel/Documentation/devicetree/bindings/ata/imx-pata.txt
new file mode 100644
index 000000000..e38d73414
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/ata/imx-pata.txt
@@ -0,0 +1,17 @@
+* Freescale i.MX PATA Controller
+
+Required properties:
+- compatible: "fsl,imx27-pata"
+- reg: Address range of the PATA Controller
+- interrupts: The interrupt of the PATA Controller
+- clocks: the clocks for the PATA Controller
+
+Example:
+
+	pata: pata@83fe0000 {
+		compatible = "fsl,imx51-pata", "fsl,imx27-pata";
+		reg = <0x83fe0000 0x4000>;
+		interrupts = <70>;
+		clocks = <&clks 161>;
+		status = "disabled";
+	};
diff --git a/kernel/Documentation/devicetree/bindings/ata/imx-sata.txt b/kernel/Documentation/devicetree/bindings/ata/imx-sata.txt
new file mode 100644
index 000000000..fa511db18
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/ata/imx-sata.txt
@@ -0,0 +1,36 @@
+* Freescale i.MX AHCI SATA Controller
+
+The Freescale i.MX SATA controller mostly conforms to the AHCI interface
+with some special extensions at integration level.
+
+Required properties:
+- compatible : should be one of the following:
+   - "fsl,imx53-ahci" for i.MX53 SATA controller
+   - "fsl,imx6q-ahci" for i.MX6Q SATA controller
+- interrupts : interrupt mapping for SATA IRQ
+- reg : registers mapping
+- clocks : list of clock specifiers, must contain an entry for each
+  required entry in clock-names
+- clock-names : should include "sata", "sata_ref" and "ahb" entries
+
+Optional properties:
+- fsl,transmit-level-mV : transmit voltage level, in millivolts.
+- fsl,transmit-boost-mdB : transmit boost level, in milli-decibels
+- fsl,transmit-atten-16ths : transmit attenuation, in 16ths
+- fsl,receive-eq-mdB : receive equalisation, in milli-decibels
+  Please refer to the technical documentation or the driver source code
+  for the list of legal values for these options.
+- fsl,no-spread-spectrum : disable spread-spectrum clocking on the SATA
+  link.
+
+Examples:
+
+sata@02200000 {
+	compatible = "fsl,imx6q-ahci";
+	reg = <0x02200000 0x4000>;
+	interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clks IMX6QDL_CLK_SATA>,
+		 <&clks IMX6QDL_CLK_SATA_REF_100M>,
+		 <&clks IMX6QDL_CLK_AHB>;
+	clock-names = "sata", "sata_ref", "ahb";
+};
diff --git a/kernel/Documentation/devicetree/bindings/ata/marvell.txt b/kernel/Documentation/devicetree/bindings/ata/marvell.txt
new file mode 100644
index 000000000..b460edd12
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/ata/marvell.txt
@@ -0,0 +1,22 @@
+* Marvell Orion SATA
+
+Required Properties:
+- compatibility : "marvell,orion-sata" or "marvell,armada-370-sata"
+- reg           : Address range of controller
+- interrupts    : Interrupt controller is using
+- nr-ports      : Number of SATA ports in use.
+
+Optional Properties:
+- phys		: List of phandles to sata phys
+- phy-names	: Should be "0", "1", etc, one number per phandle
+
+Example:
+
+	sata@80000 {
+		compatible = "marvell,orion-sata";
+		reg = <0x80000 0x5000>;
+		interrupts = <21>;
+		phys = <&sata_phy0>, <&sata_phy1>;
+		phy-names = "0", "1";
+		nr-ports = <2>;
+	}
diff --git a/kernel/Documentation/devicetree/bindings/ata/pata-arasan.txt b/kernel/Documentation/devicetree/bindings/ata/pata-arasan.txt
new file mode 100644
index 000000000..2aff154be
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/ata/pata-arasan.txt
@@ -0,0 +1,39 @@
+* ARASAN PATA COMPACT FLASH CONTROLLER
+
+Required properties:
+- compatible: "arasan,cf-spear1340"
+- reg: Address range of the CF registers
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- interrupt: Should contain the CF interrupt number
+- clock-frequency: Interface clock rate, in Hz, one of
+       25000000
+       33000000
+       40000000
+       50000000
+       66000000
+       75000000
+      100000000
+      125000000
+      150000000
+      166000000
+      200000000
+
+Optional properties:
+- arasan,broken-udma: if present, UDMA mode is unusable
+- arasan,broken-mwdma: if present, MWDMA mode is unusable
+- arasan,broken-pio: if present, PIO mode is unusable
+- dmas: one DMA channel, as described in bindings/dma/dma.txt
+  required unless both UDMA and MWDMA mode are broken
+- dma-names: the corresponding channel name, must be "data"
+
+Example:
+
+	cf@fc000000 {
+		compatible = "arasan,cf-spear1340";
+		reg = <0xfc000000 0x1000>;
+		interrupt-parent = <&vic1>;
+		interrupts = <12>;
+		dmas = <&dma-controller 23>;
+		dma-names = "data";
+	};
diff --git a/kernel/Documentation/devicetree/bindings/ata/qcom-sata.txt b/kernel/Documentation/devicetree/bindings/ata/qcom-sata.txt
new file mode 100644
index 000000000..094de91cd
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/ata/qcom-sata.txt
@@ -0,0 +1,48 @@
+* Qualcomm AHCI SATA Controller
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+Each SATA controller should have its own node.
+
+Required properties:
+- compatible		: compatible list, must contain "generic-ahci"
+- interrupts		: <interrupt mapping for SATA IRQ>
+- reg			: <registers mapping>
+- phys			: Must contain exactly one entry as specified
+			  in phy-bindings.txt
+- phy-names		: Must be "sata-phy"
+
+Required properties for "qcom,ipq806x-ahci" compatible:
+- clocks		: Must contain an entry for each entry in clock-names.
+- clock-names		: Shall be:
+				"slave_iface" - Fabric port AHB clock for SATA
+				"iface" - AHB clock
+				"core" - core clock
+				"rxoob" - RX out-of-band clock
+				"pmalive" - Power Module Alive clock
+- assigned-clocks	: Shall be:
+				SATA_RXOOB_CLK
+				SATA_PMALIVE_CLK
+- assigned-clock-rates	: Shall be:
+				100Mhz (100000000) for SATA_RXOOB_CLK
+				100Mhz (100000000) for SATA_PMALIVE_CLK
+
+Example:
+	sata@29000000 {
+		compatible = "qcom,ipq806x-ahci", "generic-ahci";
+		reg = <0x29000000 0x180>;
+
+		interrupts = <0 209 0x0>;
+
+		clocks = <&gcc SFAB_SATA_S_H_CLK>,
+			 <&gcc SATA_H_CLK>,
+			 <&gcc SATA_A_CLK>,
+			 <&gcc SATA_RXOOB_CLK>,
+			 <&gcc SATA_PMALIVE_CLK>;
+		clock-names = "slave_iface", "iface", "core",
+				"rxoob", "pmalive";
+		assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
+		assigned-clock-rates = <100000000>, <100000000>;
+
+		phys = <&sata_phy>;
+		phy-names = "sata-phy";
+	};
diff --git a/kernel/Documentation/devicetree/bindings/ata/sata_highbank.txt b/kernel/Documentation/devicetree/bindings/ata/sata_highbank.txt
new file mode 100644
index 000000000..aa83407cb
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/ata/sata_highbank.txt
@@ -0,0 +1,44 @@
+* Calxeda AHCI SATA Controller
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+The Calxeda SATA controller mostly conforms to the AHCI interface
+with some special extensions to add functionality.
+Each SATA controller should have its own node.
+
+Required properties:
+- compatible        : compatible list, contains "calxeda,hb-ahci"
+- interrupts        : <interrupt mapping for SATA IRQ>
+- reg               : <registers mapping>
+
+Optional properties:
+- dma-coherent      : Present if dma operations are coherent
+- calxeda,port-phys : phandle-combophy and lane assignment, which maps each
+			SATA port to a combophy and a lane within that
+			combophy
+- calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off,
+			which indicates that the driver supports SGPIO
+			indicator lights using the indicated GPIOs
+- calxeda,led-order : a u32 array that map port numbers to offsets within the
+			SGPIO bitstream.
+- calxeda,tx-atten  : a u32 array that contains TX attenuation override
+			codes, one per port. The upper 3 bytes are always
+			0 and thus ignored.
+- calxeda,pre-clocks : a u32 that indicates the number of additional clock
+			cycles to transmit before sending an SGPIO pattern
+- calxeda,post-clocks: a u32 that indicates the number of additional clock
+			cycles to transmit after sending an SGPIO pattern
+
+Example:
+        sata@ffe08000 {
+		compatible = "calxeda,hb-ahci";
+		reg = <0xffe08000 0x1000>;
+		interrupts = <115>;
+		dma-coherent;
+		calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1
+					&combophy0 2 &combophy0 3>;
+		calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>;
+		calxeda,led-order = <4 0 1 2 3>;
+		calxeda,tx-atten = <0xff 22 0xff 0xff 23>;
+		calxeda,pre-clocks = <10>;
+		calxeda,post-clocks = <0>;
+        };
diff --git a/kernel/Documentation/devicetree/bindings/ata/sata_rcar.txt b/kernel/Documentation/devicetree/bindings/ata/sata_rcar.txt
new file mode 100644
index 000000000..2493a5a31
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/ata/sata_rcar.txt
@@ -0,0 +1,23 @@
+* Renesas R-Car SATA
+
+Required properties:
+- compatible		: should contain one of the following:
+			  - "renesas,sata-r8a7779" for R-Car H1
+			    ("renesas,rcar-sata" is deprecated)
+			  - "renesas,sata-r8a7790-es1" for R-Car H2 ES1
+			  - "renesas,sata-r8a7790" for R-Car H2 other than ES1
+			  - "renesas,sata-r8a7791" for R-Car M2-W
+			  - "renesas,sata-r8a7793" for R-Car M2-N
+- reg			: address and length of the SATA registers;
+- interrupts		: must consist of one interrupt specifier.
+- clocks		: must contain a reference to the functional clock.
+
+Example:
+
+sata0: sata@ee300000 {
+	compatible = "renesas,sata-r8a7791";
+	reg = <0 0xee300000 0 0x2000>;
+	interrupt-parent = <&gic>;
+	interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&mstp8_clks R8A7791_CLK_SATA0>;
+};
diff --git a/kernel/Documentation/devicetree/bindings/ata/tegra-sata.txt b/kernel/Documentation/devicetree/bindings/ata/tegra-sata.txt
new file mode 100644
index 000000000..66c83c3e8
--- /dev/null
+++ b/kernel/Documentation/devicetree/bindings/ata/tegra-sata.txt
@@ -0,0 +1,32 @@
+Tegra124 SoC SATA AHCI controller
+
+Required properties :
+- compatible : For Tegra124, must contain "nvidia,tegra124-ahci".  Otherwise,
+  must contain '"nvidia,<chip>-ahci", "nvidia,tegra124-ahci"', where <chip>
+  is tegra132.
+- reg : Should contain 2 entries:
+  - AHCI register set (SATA BAR5)
+  - SATA register set
+- interrupts : Defines the interrupt used by SATA
+- clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+  - sata
+  - sata-oob
+  - cml1
+  - pll_e
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - sata
+  - sata-oob
+  - sata-cold
+- phys : Must contain an entry for each entry in phy-names.
+  See ../phy/phy-bindings.txt for details.
+- phy-names : Must include the following entries:
+  - sata-phy : XUSB PADCTL SATA PHY
+- hvdd-supply : Defines the SATA HVDD regulator
+- vddio-supply : Defines the SATA VDDIO regulator
+- avdd-supply : Defines the SATA AVDD regulator
+- target-5v-supply : Defines the SATA 5V power regulator
+- target-12v-supply : Defines the SATA 12V power regulator