These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 0 insertions, 118 deletions

diff --git a/kernel/Documentation/devicetree/bindings/arm/gic-v3.txt b/kernel/Documentation/devicetree/bindings/arm/gic-v3.txt
deleted file mode 100644
index ddfade40a..000000000
--- a/kernel/Documentation/devicetree/bindings/arm/gic-v3.txt
+++ /dev/null
@@ -1,118 +0,0 @@
-* ARM Generic Interrupt Controller, version 3
-
-AArch64 SMP cores are often associated with a GICv3, providing Private
-Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI),
-Software Generated Interrupts (SGI), and Locality-specific Peripheral
-Interrupts (LPI).
-
-Main node required properties:
-
-- compatible : should at least contain  "arm,gic-v3".
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. Must be a single cell with a value of at least 3.
-
-  The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
-  interrupts. Other values are reserved for future use.
-
-  The 2nd cell contains the interrupt number for the interrupt type.
-  SPI interrupts are in the range [0-987]. PPI interrupts are in the
-  range [0-15].
-
-  The 3rd cell is the flags, encoded as follows:
-	bits[3:0] trigger type and level flags.
-		1 = edge triggered
-		4 = level triggered
-
-  Cells 4 and beyond are reserved for future use. When the 1st cell
-  has a value of 0 or 1, cells 4 and beyond act as padding, and may be
-  ignored. It is recommended that padding cells have a value of 0.
-
-- reg : Specifies base physical address(s) and size of the GIC
-  registers, in the following order:
-  - GIC Distributor interface (GICD)
-  - GIC Redistributors (GICR), one range per redistributor region
-  - GIC CPU interface (GICC)
-  - GIC Hypervisor interface (GICH)
-  - GIC Virtual CPU interface (GICV)
-
-  GICC, GICH and GICV are optional.
-
-- interrupts : Interrupt source of the VGIC maintenance interrupt.
-
-Optional
-
-- redistributor-stride : If using padding pages, specifies the stride
-  of consecutive redistributors. Must be a multiple of 64kB.
-
-- #redistributor-regions: The number of independent contiguous regions
-  occupied by the redistributors. Required if more than one such
-  region is present.
-
-Sub-nodes:
-
-GICv3 has one or more Interrupt Translation Services (ITS) that are
-used to route Message Signalled Interrupts (MSI) to the CPUs.
-
-These nodes must have the following properties:
-- compatible : Should at least contain  "arm,gic-v3-its".
-- msi-controller : Boolean property. Identifies the node as an MSI controller
-- reg: Specifies the base physical address and size of the ITS
-  registers.
-
-The main GIC node must contain the appropriate #address-cells,
-#size-cells and ranges properties for the reg property of all ITS
-nodes.
-
-Examples:
-
-	gic: interrupt-controller@2cf00000 {
-		compatible = "arm,gic-v3";
-		#interrupt-cells = <3>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-		interrupt-controller;
-		reg = <0x0 0x2f000000 0 0x10000>,	// GICD
-		      <0x0 0x2f100000 0 0x200000>,	// GICR
-		      <0x0 0x2c000000 0 0x2000>,	// GICC
-		      <0x0 0x2c010000 0 0x2000>,	// GICH
-		      <0x0 0x2c020000 0 0x2000>;	// GICV
-		interrupts = <1 9 4>;
-
-		gic-its@2c200000 {
-			compatible = "arm,gic-v3-its";
-			msi-controller;
-			reg = <0x0 0x2c200000 0 0x200000>;
-		};
-	};
-
-	gic: interrupt-controller@2c010000 {
-		compatible = "arm,gic-v3";
-		#interrupt-cells = <3>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-		interrupt-controller;
-		redistributor-stride = <0x0 0x40000>;	// 256kB stride
-		#redistributor-regions = <2>;
-		reg = <0x0 0x2c010000 0 0x10000>,	// GICD
-		      <0x0 0x2d000000 0 0x800000>,	// GICR 1: CPUs 0-31
-		      <0x0 0x2e000000 0 0x800000>;	// GICR 2: CPUs 32-63
-		      <0x0 0x2c040000 0 0x2000>,	// GICC
-		      <0x0 0x2c060000 0 0x2000>,	// GICH
-		      <0x0 0x2c080000 0 0x2000>;	// GICV
-		interrupts = <1 9 4>;
-
-		gic-its@2c200000 {
-			compatible = "arm,gic-v3-its";
-			msi-controller;
-			reg = <0x0 0x2c200000 0 0x200000>;
-		};
-
-		gic-its@2c400000 {
-			compatible = "arm,gic-v3-its";
-			msi-controller;
-			reg = <0x0 0x2c400000 0 0x200000>;
-		};
-	};