Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 64 insertions, 0 deletions

diff --git a/kernel/Documentation/cpu-freq/intel-pstate.txt b/kernel/Documentation/cpu-freq/intel-pstate.txt
new file mode 100644
index 000000000..655750743
--- /dev/null
+++ b/kernel/Documentation/cpu-freq/intel-pstate.txt
@@ -0,0 +1,64 @@
+Intel P-state driver
+--------------------
+
+This driver provides an interface to control the P state selection for
+SandyBridge+ Intel processors.  The driver can operate two different
+modes based on the processor model legacy and Hardware P state (HWP)
+mode.
+
+In legacy mode the driver implements a scaling driver with an internal
+governor for Intel Core processors.  The driver follows the same model
+as the Transmeta scaling driver (longrun.c) and implements the
+setpolicy() instead of target().  Scaling drivers that implement
+setpolicy() are assumed to implement internal governors by the cpufreq
+core. All the logic for selecting the current P state is contained
+within the driver; no external governor is used by the cpufreq core.
+
+In HWP mode P state selection is implemented in the processor
+itself. The driver provides the interfaces between the cpufreq core and
+the processor to control P state selection based on user preferences
+and reporting frequency to the cpufreq core.  In this mode the
+internal governor code is disabled.
+
+In addtion to the interfaces provided by the cpufreq core for
+controlling frequency the driver provides sysfs files for
+controlling P state selection. These files have been added to
+/sys/devices/system/cpu/intel_pstate/
+
+      max_perf_pct: limits the maximum P state that will be requested by
+      the driver stated as a percentage of the available performance. The
+      available (P states) performance may be reduced by the no_turbo
+      setting described below.
+
+      min_perf_pct: limits the minimum P state that will be  requested by
+      the driver stated as a percentage of the max (non-turbo)
+      performance level.
+
+      no_turbo: limits the driver to selecting P states below the turbo
+      frequency range.
+
+      turbo_pct: displays the percentage of the total performance that
+      is supported by hardware that is in the turbo range.  This number
+      is independent of whether turbo has been disabled or not.
+
+      num_pstates: displays the number of pstates that are supported
+      by hardware.  This number is independent of whether turbo has
+      been disabled or not.
+
+For contemporary Intel processors, the frequency is controlled by the
+processor itself and the P-states exposed to software are related to
+performance levels.  The idea that frequency can be set to a single
+frequency is fiction for Intel Core processors. Even if the scaling
+driver selects a single P state the actual frequency the processor
+will run at is selected by the processor itself.
+
+For legacy mode debugfs files have also been added to allow tuning of
+the internal governor algorythm. These files are located at
+/sys/kernel/debug/pstate_snb/ These files are NOT present in HWP mode.
+
+      deadband
+      d_gain_pct
+      i_gain_pct
+      p_gain_pct
+      sample_rate_ms
+      setpoint