Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

15 files changed, 2709 insertions, 0 deletions

diff --git a/kernel/Documentation/block/00-INDEX b/kernel/Documentation/block/00-INDEX
new file mode 100644
index 000000000..e840b4761
--- /dev/null
+++ b/kernel/Documentation/block/00-INDEX
@@ -0,0 +1,28 @@
+00-INDEX
+	- This file
+biodoc.txt
+	- Notes on the Generic Block Layer Rewrite in Linux 2.5
+capability.txt
+	- Generic Block Device Capability (/sys/block/<device>/capability)
+cfq-iosched.txt
+	- CFQ IO scheduler tunables
+cmdline-partition.txt
+	- how to specify block device partitions on kernel command line
+data-integrity.txt
+	- Block data integrity
+deadline-iosched.txt
+	- Deadline IO scheduler tunables
+ioprio.txt
+	- Block io priorities (in CFQ scheduler)
+null_blk.txt
+	- Null block for block-layer benchmarking.
+queue-sysfs.txt
+	- Queue's sysfs entries
+request.txt
+	- The members of struct request (in include/linux/blkdev.h)
+stat.txt
+	- Block layer statistics in /sys/block/<device>/stat
+switching-sched.txt
+	- Switching I/O schedulers at runtime
+writeback_cache_control.txt
+	- Control of volatile write back caches
diff --git a/kernel/Documentation/block/biodoc.txt b/kernel/Documentation/block/biodoc.txt
new file mode 100644
index 000000000..fd12c0d83
--- /dev/null
+++ b/kernel/Documentation/block/biodoc.txt
@@ -0,0 +1,1180 @@
+	Notes on the Generic Block Layer Rewrite in Linux 2.5
+	=====================================================
+
+Notes Written on Jan 15, 2002:
+	Jens Axboe <jens.axboe@oracle.com>
+	Suparna Bhattacharya <suparna@in.ibm.com>
+
+Last Updated May 2, 2002
+September 2003: Updated I/O Scheduler portions
+	Nick Piggin <npiggin@kernel.dk>
+
+Introduction:
+
+These are some notes describing some aspects of the 2.5 block layer in the
+context of the bio rewrite. The idea is to bring out some of the key
+changes and a glimpse of the rationale behind those changes.
+
+Please mail corrections & suggestions to suparna@in.ibm.com.
+
+Credits:
+---------
+
+2.5 bio rewrite:
+	Jens Axboe <jens.axboe@oracle.com>
+
+Many aspects of the generic block layer redesign were driven by and evolved
+over discussions, prior patches and the collective experience of several
+people. See sections 8 and 9 for a list of some related references.
+
+The following people helped with review comments and inputs for this
+document:
+	Christoph Hellwig <hch@infradead.org>
+	Arjan van de Ven <arjanv@redhat.com>
+	Randy Dunlap <rdunlap@xenotime.net>
+	Andre Hedrick <andre@linux-ide.org>
+
+The following people helped with fixes/contributions to the bio patches
+while it was still work-in-progress:
+	David S. Miller <davem@redhat.com>
+
+
+Description of Contents:
+------------------------
+
+1. Scope for tuning of logic to various needs
+  1.1 Tuning based on device or low level driver capabilities
+	- Per-queue parameters
+	- Highmem I/O support
+	- I/O scheduler modularization
+  1.2 Tuning based on high level requirements/capabilities
+	1.2.1 Request Priority/Latency
+  1.3 Direct access/bypass to lower layers for diagnostics and special
+      device operations
+	1.3.1 Pre-built commands
+2. New flexible and generic but minimalist i/o structure or descriptor
+   (instead of using buffer heads at the i/o layer)
+  2.1 Requirements/Goals addressed
+  2.2 The bio struct in detail (multi-page io unit)
+  2.3 Changes in the request structure
+3. Using bios
+  3.1 Setup/teardown (allocation, splitting)
+  3.2 Generic bio helper routines
+    3.2.1 Traversing segments and completion units in a request
+    3.2.2 Setting up DMA scatterlists
+    3.2.3 I/O completion
+    3.2.4 Implications for drivers that do not interpret bios (don't handle
+ 	  multiple segments)
+    3.2.5 Request command tagging
+  3.3 I/O submission
+4. The I/O scheduler
+5. Scalability related changes
+  5.1 Granular locking: Removal of io_request_lock
+  5.2 Prepare for transition to 64 bit sector_t
+6. Other Changes/Implications
+  6.1 Partition re-mapping handled by the generic block layer
+7. A few tips on migration of older drivers
+8. A list of prior/related/impacted patches/ideas
+9. Other References/Discussion Threads
+
+---------------------------------------------------------------------------
+
+Bio Notes
+--------
+
+Let us discuss the changes in the context of how some overall goals for the
+block layer are addressed.
+
+1. Scope for tuning the generic logic to satisfy various requirements
+
+The block layer design supports adaptable abstractions to handle common
+processing with the ability to tune the logic to an appropriate extent
+depending on the nature of the device and the requirements of the caller.
+One of the objectives of the rewrite was to increase the degree of tunability
+and to enable higher level code to utilize underlying device/driver
+capabilities to the maximum extent for better i/o performance. This is
+important especially in the light of ever improving hardware capabilities
+and application/middleware software designed to take advantage of these
+capabilities.
+
+1.1 Tuning based on low level device / driver capabilities
+
+Sophisticated devices with large built-in caches, intelligent i/o scheduling
+optimizations, high memory DMA support, etc may find some of the
+generic processing an overhead, while for less capable devices the
+generic functionality is essential for performance or correctness reasons.
+Knowledge of some of the capabilities or parameters of the device should be
+used at the generic block layer to take the right decisions on
+behalf of the driver.
+
+How is this achieved ?
+
+Tuning at a per-queue level:
+
+i. Per-queue limits/values exported to the generic layer by the driver
+
+Various parameters that the generic i/o scheduler logic uses are set at
+a per-queue level (e.g maximum request size, maximum number of segments in
+a scatter-gather list, hardsect size)
+
+Some parameters that were earlier available as global arrays indexed by
+major/minor are now directly associated with the queue. Some of these may
+move into the block device structure in the future. Some characteristics
+have been incorporated into a queue flags field rather than separate fields
+in themselves.  There are blk_queue_xxx functions to set the parameters,
+rather than update the fields directly
+
+Some new queue property settings:
+
+	blk_queue_bounce_limit(q, u64 dma_address)
+		Enable I/O to highmem pages, dma_address being the
+		limit. No highmem default.
+
+	blk_queue_max_sectors(q, max_sectors)
+		Sets two variables that limit the size of the request.
+
+		- The request queue's max_sectors, which is a soft size in
+		units of 512 byte sectors, and could be dynamically varied
+		by the core kernel.
+
+		- The request queue's max_hw_sectors, which is a hard limit
+		and reflects the maximum size request a driver can handle
+		in units of 512 byte sectors.
+
+		The default for both max_sectors and max_hw_sectors is
+		255. The upper limit of max_sectors is 1024.
+
+	blk_queue_max_phys_segments(q, max_segments)
+		Maximum physical segments you can handle in a request. 128
+		default (driver limit). (See 3.2.2)
+
+	blk_queue_max_hw_segments(q, max_segments)
+		Maximum dma segments the hardware can handle in a request. 128
+		default (host adapter limit, after dma remapping).
+		(See 3.2.2)
+
+	blk_queue_max_segment_size(q, max_seg_size)
+		Maximum size of a clustered segment, 64kB default.
+
+	blk_queue_hardsect_size(q, hardsect_size)
+		Lowest possible sector size that the hardware can operate
+		on, 512 bytes default.
+
+New queue flags:
+
+	QUEUE_FLAG_CLUSTER (see 3.2.2)
+	QUEUE_FLAG_QUEUED (see 3.2.4)
+
+
+ii. High-mem i/o capabilities are now considered the default
+
+The generic bounce buffer logic, present in 2.4, where the block layer would
+by default copyin/out i/o requests on high-memory buffers to low-memory buffers
+assuming that the driver wouldn't be able to handle it directly, has been
+changed in 2.5. The bounce logic is now applied only for memory ranges
+for which the device cannot handle i/o. A driver can specify this by
+setting the queue bounce limit for the request queue for the device
+(blk_queue_bounce_limit()). This avoids the inefficiencies of the copyin/out
+where a device is capable of handling high memory i/o.
+
+In order to enable high-memory i/o where the device is capable of supporting
+it, the pci dma mapping routines and associated data structures have now been
+modified to accomplish a direct page -> bus translation, without requiring
+a virtual address mapping (unlike the earlier scheme of virtual address
+-> bus translation). So this works uniformly for high-memory pages (which
+do not have a corresponding kernel virtual address space mapping) and
+low-memory pages.
+
+Note: Please refer to Documentation/DMA-API-HOWTO.txt for a discussion
+on PCI high mem DMA aspects and mapping of scatter gather lists, and support
+for 64 bit PCI.
+
+Special handling is required only for cases where i/o needs to happen on
+pages at physical memory addresses beyond what the device can support. In these
+cases, a bounce bio representing a buffer from the supported memory range
+is used for performing the i/o with copyin/copyout as needed depending on
+the type of the operation.  For example, in case of a read operation, the
+data read has to be copied to the original buffer on i/o completion, so a
+callback routine is set up to do this, while for write, the data is copied
+from the original buffer to the bounce buffer prior to issuing the
+operation. Since an original buffer may be in a high memory area that's not
+mapped in kernel virtual addr, a kmap operation may be required for
+performing the copy, and special care may be needed in the completion path
+as it may not be in irq context. Special care is also required (by way of
+GFP flags) when allocating bounce buffers, to avoid certain highmem
+deadlock possibilities.
+
+It is also possible that a bounce buffer may be allocated from high-memory
+area that's not mapped in kernel virtual addr, but within the range that the
+device can use directly; so the bounce page may need to be kmapped during
+copy operations. [Note: This does not hold in the current implementation,
+though]
+
+There are some situations when pages from high memory may need to
+be kmapped, even if bounce buffers are not necessary. For example a device
+may need to abort DMA operations and revert to PIO for the transfer, in
+which case a virtual mapping of the page is required. For SCSI it is also
+done in some scenarios where the low level driver cannot be trusted to
+handle a single sg entry correctly. The driver is expected to perform the
+kmaps as needed on such occasions using the __bio_kmap_atomic and bio_kmap_irq
+routines as appropriate. A driver could also use the blk_queue_bounce()
+routine on its own to bounce highmem i/o to low memory for specific requests
+if so desired.
+
+iii. The i/o scheduler algorithm itself can be replaced/set as appropriate
+
+As in 2.4, it is possible to plugin a brand new i/o scheduler for a particular
+queue or pick from (copy) existing generic schedulers and replace/override
+certain portions of it. The 2.5 rewrite provides improved modularization
+of the i/o scheduler. There are more pluggable callbacks, e.g for init,
+add request, extract request, which makes it possible to abstract specific
+i/o scheduling algorithm aspects and details outside of the generic loop.
+It also makes it possible to completely hide the implementation details of
+the i/o scheduler from block drivers.
+
+I/O scheduler wrappers are to be used instead of accessing the queue directly.
+See section 4. The I/O scheduler for details.
+
+1.2 Tuning Based on High level code capabilities
+
+i. Application capabilities for raw i/o
+
+This comes from some of the high-performance database/middleware
+requirements where an application prefers to make its own i/o scheduling
+decisions based on an understanding of the access patterns and i/o
+characteristics
+
+ii. High performance filesystems or other higher level kernel code's
+capabilities
+
+Kernel components like filesystems could also take their own i/o scheduling
+decisions for optimizing performance. Journalling filesystems may need
+some control over i/o ordering.
+
+What kind of support exists at the generic block layer for this ?
+
+The flags and rw fields in the bio structure can be used for some tuning
+from above e.g indicating that an i/o is just a readahead request, or priority
+settings (currently unused). As far as user applications are concerned they
+would need an additional mechanism either via open flags or ioctls, or some
+other upper level mechanism to communicate such settings to block.
+
+1.2.1 Request Priority/Latency
+
+Todo/Under discussion:
+Arjan's proposed request priority scheme allows higher levels some broad
+  control (high/med/low) over the priority  of an i/o request vs other pending
+  requests in the queue. For example it allows reads for bringing in an
+  executable page on demand to be given a higher priority over pending write
+  requests which haven't aged too much on the queue. Potentially this priority
+  could even be exposed to applications in some manner, providing higher level
+  tunability. Time based aging avoids starvation of lower priority
+  requests. Some bits in the bi_rw flags field in the bio structure are
+  intended to be used for this priority information.
+
+
+1.3 Direct Access to Low level Device/Driver Capabilities (Bypass mode)
+    (e.g Diagnostics, Systems Management)
+
+There are situations where high-level code needs to have direct access to
+the low level device capabilities or requires the ability to issue commands
+to the device bypassing some of the intermediate i/o layers.
+These could, for example, be special control commands issued through ioctl
+interfaces, or could be raw read/write commands that stress the drive's
+capabilities for certain kinds of fitness tests. Having direct interfaces at
+multiple levels without having to pass through upper layers makes
+it possible to perform bottom up validation of the i/o path, layer by
+layer, starting from the media.
+
+The normal i/o submission interfaces, e.g submit_bio, could be bypassed
+for specially crafted requests which such ioctl or diagnostics
+interfaces would typically use, and the elevator add_request routine
+can instead be used to directly insert such requests in the queue or preferably
+the blk_do_rq routine can be used to place the request on the queue and
+wait for completion. Alternatively, sometimes the caller might just
+invoke a lower level driver specific interface with the request as a
+parameter.
+
+If the request is a means for passing on special information associated with
+the command, then such information is associated with the request->special
+field (rather than misuse the request->buffer field which is meant for the
+request data buffer's virtual mapping).
+
+For passing request data, the caller must build up a bio descriptor
+representing the concerned memory buffer if the underlying driver interprets
+bio segments or uses the block layer end*request* functions for i/o
+completion. Alternatively one could directly use the request->buffer field to
+specify the virtual address of the buffer, if the driver expects buffer
+addresses passed in this way and ignores bio entries for the request type
+involved. In the latter case, the driver would modify and manage the
+request->buffer, request->sector and request->nr_sectors or
+request->current_nr_sectors fields itself rather than using the block layer
+end_request or end_that_request_first completion interfaces.
+(See 2.3 or Documentation/block/request.txt for a brief explanation of
+the request structure fields)
+
+[TBD: end_that_request_last should be usable even in this case;
+Perhaps an end_that_direct_request_first routine could be implemented to make
+handling direct requests easier for such drivers; Also for drivers that
+expect bios, a helper function could be provided for setting up a bio
+corresponding to a data buffer]
+
+<JENS: I dont understand the above, why is end_that_request_first() not
+usable? Or _last for that matter. I must be missing something>
+<SUP: What I meant here was that if the request doesn't have a bio, then
+ end_that_request_first doesn't modify nr_sectors or current_nr_sectors,
+ and hence can't be used for advancing request state settings on the
+ completion of partial transfers. The driver has to modify these fields 
+ directly by hand.
+ This is because end_that_request_first only iterates over the bio list,
+ and always returns 0 if there are none associated with the request.
+ _last works OK in this case, and is not a problem, as I mentioned earlier
+>
+
+1.3.1 Pre-built Commands
+
+A request can be created with a pre-built custom command  to be sent directly
+to the device. The cmd block in the request structure has room for filling
+in the command bytes. (i.e rq->cmd is now 16 bytes in size, and meant for
+command pre-building, and the type of the request is now indicated
+through rq->flags instead of via rq->cmd)
+
+The request structure flags can be set up to indicate the type of request
+in such cases (REQ_PC: direct packet command passed to driver, REQ_BLOCK_PC:
+packet command issued via blk_do_rq, REQ_SPECIAL: special request).
+
+It can help to pre-build device commands for requests in advance.
+Drivers can now specify a request prepare function (q->prep_rq_fn) that the
+block layer would invoke to pre-build device commands for a given request,
+or perform other preparatory processing for the request. This is routine is
+called by elv_next_request(), i.e. typically just before servicing a request.
+(The prepare function would not be called for requests that have REQ_DONTPREP
+enabled)
+
+Aside:
+  Pre-building could possibly even be done early, i.e before placing the
+  request on the queue, rather than construct the command on the fly in the
+  driver while servicing the request queue when it may affect latencies in
+  interrupt context or responsiveness in general. One way to add early
+  pre-building would be to do it whenever we fail to merge on a request.
+  Now REQ_NOMERGE is set in the request flags to skip this one in the future,
+  which means that it will not change before we feed it to the device. So
+  the pre-builder hook can be invoked there.
+
+
+2. Flexible and generic but minimalist i/o structure/descriptor.
+
+2.1 Reason for a new structure and requirements addressed
+
+Prior to 2.5, buffer heads were used as the unit of i/o at the generic block
+layer, and the low level request structure was associated with a chain of
+buffer heads for a contiguous i/o request. This led to certain inefficiencies
+when it came to large i/o requests and readv/writev style operations, as it
+forced such requests to be broken up into small chunks before being passed
+on to the generic block layer, only to be merged by the i/o scheduler
+when the underlying device was capable of handling the i/o in one shot.
+Also, using the buffer head as an i/o structure for i/os that didn't originate
+from the buffer cache unnecessarily added to the weight of the descriptors
+which were generated for each such chunk.
+
+The following were some of the goals and expectations considered in the
+redesign of the block i/o data structure in 2.5.
+
+i.  Should be appropriate as a descriptor for both raw and buffered i/o  -
+    avoid cache related fields which are irrelevant in the direct/page i/o path,
+    or filesystem block size alignment restrictions which may not be relevant
+    for raw i/o.
+ii. Ability to represent high-memory buffers (which do not have a virtual
+    address mapping in kernel address space).
+iii.Ability to represent large i/os w/o unnecessarily breaking them up (i.e
+    greater than PAGE_SIZE chunks in one shot)
+iv. At the same time, ability to retain independent identity of i/os from
+    different sources or i/o units requiring individual completion (e.g. for
+    latency reasons)
+v.  Ability to represent an i/o involving multiple physical memory segments
+    (including non-page aligned page fragments, as specified via readv/writev)
+    without unnecessarily breaking it up, if the underlying device is capable of
+    handling it.
+vi. Preferably should be based on a memory descriptor structure that can be
+    passed around different types of subsystems or layers, maybe even
+    networking, without duplication or extra copies of data/descriptor fields
+    themselves in the process
+vii.Ability to handle the possibility of splits/merges as the structure passes
+    through layered drivers (lvm, md, evms), with minimal overhead.
+
+The solution was to define a new structure (bio)  for the block layer,
+instead of using the buffer head structure (bh) directly, the idea being
+avoidance of some associated baggage and limitations. The bio structure
+is uniformly used for all i/o at the block layer ; it forms a part of the
+bh structure for buffered i/o, and in the case of raw/direct i/o kiobufs are
+mapped to bio structures.
+
+2.2 The bio struct
+
+The bio structure uses a vector representation pointing to an array of tuples
+of <page, offset, len> to describe the i/o buffer, and has various other
+fields describing i/o parameters and state that needs to be maintained for
+performing the i/o.
+
+Notice that this representation means that a bio has no virtual address
+mapping at all (unlike buffer heads).
+
+struct bio_vec {
+       struct page     *bv_page;
+       unsigned short  bv_len;
+       unsigned short  bv_offset;
+};
+
+/*
+ * main unit of I/O for the block layer and lower layers (ie drivers)
+ */
+struct bio {
+       struct bio          *bi_next;    /* request queue link */
+       struct block_device *bi_bdev;	/* target device */
+       unsigned long       bi_flags;    /* status, command, etc */
+       unsigned long       bi_rw;       /* low bits: r/w, high: priority */
+
+       unsigned int	bi_vcnt;     /* how may bio_vec's */
+       struct bvec_iter	bi_iter;	/* current index into bio_vec array */
+
+       unsigned int	bi_size;     /* total size in bytes */
+       unsigned short 	bi_phys_segments; /* segments after physaddr coalesce*/
+       unsigned short	bi_hw_segments; /* segments after DMA remapping */
+       unsigned int	bi_max;	     /* max bio_vecs we can hold
+                                        used as index into pool */
+       struct bio_vec   *bi_io_vec;  /* the actual vec list */
+       bio_end_io_t	*bi_end_io;  /* bi_end_io (bio) */
+       atomic_t		bi_cnt;	     /* pin count: free when it hits zero */
+       void             *bi_private;
+};
+
+With this multipage bio design:
+
+- Large i/os can be sent down in one go using a bio_vec list consisting
+  of an array of <page, offset, len> fragments (similar to the way fragments
+  are represented in the zero-copy network code)
+- Splitting of an i/o request across multiple devices (as in the case of
+  lvm or raid) is achieved by cloning the bio (where the clone points to
+  the same bi_io_vec array, but with the index and size accordingly modified)
+- A linked list of bios is used as before for unrelated merges (*) - this
+  avoids reallocs and makes independent completions easier to handle.
+- Code that traverses the req list can find all the segments of a bio
+  by using rq_for_each_segment.  This handles the fact that a request
+  has multiple bios, each of which can have multiple segments.
+- Drivers which can't process a large bio in one shot can use the bi_iter
+  field to keep track of the next bio_vec entry to process.
+  (e.g a 1MB bio_vec needs to be handled in max 128kB chunks for IDE)
+  [TBD: Should preferably also have a bi_voffset and bi_vlen to avoid modifying
+   bi_offset an len fields]
+
+(*) unrelated merges -- a request ends up containing two or more bios that
+    didn't originate from the same place.
+
+bi_end_io() i/o callback gets called on i/o completion of the entire bio.
+
+At a lower level, drivers build a scatter gather list from the merged bios.
+The scatter gather list is in the form of an array of <page, offset, len>
+entries with their corresponding dma address mappings filled in at the
+appropriate time. As an optimization, contiguous physical pages can be
+covered by a single entry where <page> refers to the first page and <len>
+covers the range of pages (up to 16 contiguous pages could be covered this
+way). There is a helper routine (blk_rq_map_sg) which drivers can use to build
+the sg list.
+
+Note: Right now the only user of bios with more than one page is ll_rw_kio,
+which in turn means that only raw I/O uses it (direct i/o may not work
+right now). The intent however is to enable clustering of pages etc to
+become possible. The pagebuf abstraction layer from SGI also uses multi-page
+bios, but that is currently not included in the stock development kernels.
+The same is true of Andrew Morton's work-in-progress multipage bio writeout 
+and readahead patches.
+
+2.3 Changes in the Request Structure
+
+The request structure is the structure that gets passed down to low level
+drivers. The block layer make_request function builds up a request structure,
+places it on the queue and invokes the drivers request_fn. The driver makes
+use of block layer helper routine elv_next_request to pull the next request
+off the queue. Control or diagnostic functions might bypass block and directly
+invoke underlying driver entry points passing in a specially constructed
+request structure.
+
+Only some relevant fields (mainly those which changed or may be referred
+to in some of the discussion here) are listed below, not necessarily in
+the order in which they occur in the structure (see include/linux/blkdev.h)
+Refer to Documentation/block/request.txt for details about all the request
+structure fields and a quick reference about the layers which are
+supposed to use or modify those fields.
+
+struct request {
+	struct list_head queuelist;  /* Not meant to be directly accessed by
+					the driver.
+					Used by q->elv_next_request_fn
+					rq->queue is gone
+					*/
+	.
+	.
+	unsigned char cmd[16]; /* prebuilt command data block */
+	unsigned long flags;   /* also includes earlier rq->cmd settings */
+	.
+	.
+	sector_t sector; /* this field is now of type sector_t instead of int
+			    preparation for 64 bit sectors */
+	.
+	.
+
+	/* Number of scatter-gather DMA addr+len pairs after
+	 * physical address coalescing is performed.
+	 */
+	unsigned short nr_phys_segments;
+
+	/* Number of scatter-gather addr+len pairs after
+	 * physical and DMA remapping hardware coalescing is performed.
+	 * This is the number of scatter-gather entries the driver
+	 * will actually have to deal with after DMA mapping is done.
+	 */
+	unsigned short nr_hw_segments;
+
+	/* Various sector counts */
+	unsigned long nr_sectors;  /* no. of sectors left: driver modifiable */
+	unsigned long hard_nr_sectors;  /* block internal copy of above */
+	unsigned int current_nr_sectors; /* no. of sectors left in the
+					   current segment:driver modifiable */
+	unsigned long hard_cur_sectors; /* block internal copy of the above */
+	.
+	.
+	int tag;	/* command tag associated with request */
+	void *special;  /* same as before */
+	char *buffer;   /* valid only for low memory buffers up to
+			 current_nr_sectors */
+	.
+	.
+	struct bio *bio, *biotail;  /* bio list instead of bh */
+	struct request_list *rl;
+}
+	
+See the rq_flag_bits definitions for an explanation of the various flags
+available. Some bits are used by the block layer or i/o scheduler.
+	
+The behaviour of the various sector counts are almost the same as before,
+except that since we have multi-segment bios, current_nr_sectors refers
+to the numbers of sectors in the current segment being processed which could
+be one of the many segments in the current bio (i.e i/o completion unit).
+The nr_sectors value refers to the total number of sectors in the whole
+request that remain to be transferred (no change). The purpose of the
+hard_xxx values is for block to remember these counts every time it hands
+over the request to the driver. These values are updated by block on
+end_that_request_first, i.e. every time the driver completes a part of the
+transfer and invokes block end*request helpers to mark this. The
+driver should not modify these values. The block layer sets up the
+nr_sectors and current_nr_sectors fields (based on the corresponding
+hard_xxx values and the number of bytes transferred) and updates it on
+every transfer that invokes end_that_request_first. It does the same for the
+buffer, bio, bio->bi_iter fields too.
+
+The buffer field is just a virtual address mapping of the current segment
+of the i/o buffer in cases where the buffer resides in low-memory. For high
+memory i/o, this field is not valid and must not be used by drivers.
+
+Code that sets up its own request structures and passes them down to
+a driver needs to be careful about interoperation with the block layer helper
+functions which the driver uses. (Section 1.3)
+
+3. Using bios
+
+3.1 Setup/Teardown
+
+There are routines for managing the allocation, and reference counting, and
+freeing of bios (bio_alloc, bio_get, bio_put).
+
+This makes use of Ingo Molnar's mempool implementation, which enables
+subsystems like bio to maintain their own reserve memory pools for guaranteed
+deadlock-free allocations during extreme VM load. For example, the VM
+subsystem makes use of the block layer to writeout dirty pages in order to be
+able to free up memory space, a case which needs careful handling. The
+allocation logic draws from the preallocated emergency reserve in situations
+where it cannot allocate through normal means. If the pool is empty and it
+can wait, then it would trigger action that would help free up memory or
+replenish the pool (without deadlocking) and wait for availability in the pool.
+If it is in IRQ context, and hence not in a position to do this, allocation
+could fail if the pool is empty. In general mempool always first tries to
+perform allocation without having to wait, even if it means digging into the
+pool as long it is not less that 50% full.
+
+On a free, memory is released to the pool or directly freed depending on
+the current availability in the pool. The mempool interface lets the
+subsystem specify the routines to be used for normal alloc and free. In the
+case of bio, these routines make use of the standard slab allocator.
+
+The caller of bio_alloc is expected to taken certain steps to avoid
+deadlocks, e.g. avoid trying to allocate more memory from the pool while
+already holding memory obtained from the pool.
+[TBD: This is a potential issue, though a rare possibility
+ in the bounce bio allocation that happens in the current code, since
+ it ends up allocating a second bio from the same pool while
+ holding the original bio ]
+
+Memory allocated from the pool should be released back within a limited
+amount of time (in the case of bio, that would be after the i/o is completed).
+This ensures that if part of the pool has been used up, some work (in this
+case i/o) must already be in progress and memory would be available when it
+is over. If allocating from multiple pools in the same code path, the order
+or hierarchy of allocation needs to be consistent, just the way one deals
+with multiple locks.
+
+The bio_alloc routine also needs to allocate the bio_vec_list (bvec_alloc())
+for a non-clone bio. There are the 6 pools setup for different size biovecs,
+so bio_alloc(gfp_mask, nr_iovecs) will allocate a vec_list of the
+given size from these slabs.
+
+The bio_get() routine may be used to hold an extra reference on a bio prior
+to i/o submission, if the bio fields are likely to be accessed after the
+i/o is issued (since the bio may otherwise get freed in case i/o completion
+happens in the meantime).
+
+The bio_clone() routine may be used to duplicate a bio, where the clone
+shares the bio_vec_list with the original bio (i.e. both point to the
+same bio_vec_list). This would typically be used for splitting i/o requests
+in lvm or md.
+
+3.2 Generic bio helper Routines
+
+3.2.1 Traversing segments and completion units in a request
+
+The macro rq_for_each_segment() should be used for traversing the bios
+in the request list (drivers should avoid directly trying to do it
+themselves). Using these helpers should also make it easier to cope
+with block changes in the future.
+
+	struct req_iterator iter;
+	rq_for_each_segment(bio_vec, rq, iter)
+		/* bio_vec is now current segment */
+
+I/O completion callbacks are per-bio rather than per-segment, so drivers
+that traverse bio chains on completion need to keep that in mind. Drivers
+which don't make a distinction between segments and completion units would
+need to be reorganized to support multi-segment bios.
+
+3.2.2 Setting up DMA scatterlists
+
+The blk_rq_map_sg() helper routine would be used for setting up scatter
+gather lists from a request, so a driver need not do it on its own.
+
+	nr_segments = blk_rq_map_sg(q, rq, scatterlist);
+
+The helper routine provides a level of abstraction which makes it easier
+to modify the internals of request to scatterlist conversion down the line
+without breaking drivers. The blk_rq_map_sg routine takes care of several
+things like collapsing physically contiguous segments (if QUEUE_FLAG_CLUSTER
+is set) and correct segment accounting to avoid exceeding the limits which
+the i/o hardware can handle, based on various queue properties.
+
+- Prevents a clustered segment from crossing a 4GB mem boundary
+- Avoids building segments that would exceed the number of physical
+  memory segments that the driver can handle (phys_segments) and the
+  number that the underlying hardware can handle at once, accounting for
+  DMA remapping (hw_segments)  (i.e. IOMMU aware limits).
+
+Routines which the low level driver can use to set up the segment limits:
+
+blk_queue_max_hw_segments() : Sets an upper limit of the maximum number of
+hw data segments in a request (i.e. the maximum number of address/length
+pairs the host adapter can actually hand to the device at once)
+
+blk_queue_max_phys_segments() : Sets an upper limit on the maximum number
+of physical data segments in a request (i.e. the largest sized scatter list
+a driver could handle)
+
+3.2.3 I/O completion
+
+The existing generic block layer helper routines end_request,
+end_that_request_first and end_that_request_last can be used for i/o
+completion (and setting things up so the rest of the i/o or the next
+request can be kicked of) as before. With the introduction of multi-page
+bio support, end_that_request_first requires an additional argument indicating
+the number of sectors completed.
+
+3.2.4 Implications for drivers that do not interpret bios (don't handle
+ multiple segments)
+
+Drivers that do not interpret bios e.g those which do not handle multiple
+segments and do not support i/o into high memory addresses (require bounce
+buffers) and expect only virtually mapped buffers, can access the rq->buffer
+field. As before the driver should use current_nr_sectors to determine the
+size of remaining data in the current segment (that is the maximum it can
+transfer in one go unless it interprets segments), and rely on the block layer
+end_request, or end_that_request_first/last to take care of all accounting
+and transparent mapping of the next bio segment when a segment boundary
+is crossed on completion of a transfer. (The end*request* functions should
+be used if only if the request has come down from block/bio path, not for
+direct access requests which only specify rq->buffer without a valid rq->bio)
+
+3.2.5 Generic request command tagging
+
+3.2.5.1 Tag helpers
+
+Block now offers some simple generic functionality to help support command
+queueing (typically known as tagged command queueing), ie manage more than
+one outstanding command on a queue at any given time.
+
+	blk_queue_init_tags(struct request_queue *q, int depth)
+
+	Initialize internal command tagging structures for a maximum
+	depth of 'depth'.
+
+	blk_queue_free_tags((struct request_queue *q)
+
+	Teardown tag info associated with the queue. This will be done
+	automatically by block if blk_queue_cleanup() is called on a queue
+	that is using tagging.
+
+The above are initialization and exit management, the main helpers during
+normal operations are:
+
+	blk_queue_start_tag(struct request_queue *q, struct request *rq)
+
+	Start tagged operation for this request. A free tag number between
+	0 and 'depth' is assigned to the request (rq->tag holds this number),
+	and 'rq' is added to the internal tag management. If the maximum depth
+	for this queue is already achieved (or if the tag wasn't started for
+	some other reason), 1 is returned. Otherwise 0 is returned.
+
+	blk_queue_end_tag(struct request_queue *q, struct request *rq)
+
+	End tagged operation on this request. 'rq' is removed from the internal
+	book keeping structures.
+
+To minimize struct request and queue overhead, the tag helpers utilize some
+of the same request members that are used for normal request queue management.
+This means that a request cannot both be an active tag and be on the queue
+list at the same time. blk_queue_start_tag() will remove the request, but
+the driver must remember to call blk_queue_end_tag() before signalling
+completion of the request to the block layer. This means ending tag
+operations before calling end_that_request_last()! For an example of a user
+of these helpers, see the IDE tagged command queueing support.
+
+Certain hardware conditions may dictate a need to invalidate the block tag
+queue. For instance, on IDE any tagged request error needs to clear both
+the hardware and software block queue and enable the driver to sanely restart
+all the outstanding requests. There's a third helper to do that:
+
+	blk_queue_invalidate_tags(struct request_queue *q)
+
+	Clear the internal block tag queue and re-add all the pending requests
+	to the request queue. The driver will receive them again on the
+	next request_fn run, just like it did the first time it encountered
+	them.
+
+3.2.5.2 Tag info
+
+Some block functions exist to query current tag status or to go from a
+tag number to the associated request. These are, in no particular order:
+
+	blk_queue_tagged(q)
+
+	Returns 1 if the queue 'q' is using tagging, 0 if not.
+
+	blk_queue_tag_request(q, tag)
+
+	Returns a pointer to the request associated with tag 'tag'.
+
+	blk_queue_tag_depth(q)
+	
+	Return current queue depth.
+
+	blk_queue_tag_queue(q)
+
+	Returns 1 if the queue can accept a new queued command, 0 if we are
+	at the maximum depth already.
+
+	blk_queue_rq_tagged(rq)
+
+	Returns 1 if the request 'rq' is tagged.
+
+3.2.5.2 Internal structure
+
+Internally, block manages tags in the blk_queue_tag structure:
+
+	struct blk_queue_tag {
+		struct request **tag_index;	/* array or pointers to rq */
+		unsigned long *tag_map;		/* bitmap of free tags */
+		struct list_head busy_list;	/* fifo list of busy tags */
+		int busy;			/* queue depth */
+		int max_depth;			/* max queue depth */
+	};
+
+Most of the above is simple and straight forward, however busy_list may need
+a bit of explaining. Normally we don't care too much about request ordering,
+but in the event of any barrier requests in the tag queue we need to ensure
+that requests are restarted in the order they were queue. This may happen
+if the driver needs to use blk_queue_invalidate_tags().
+
+3.3 I/O Submission
+
+The routine submit_bio() is used to submit a single io. Higher level i/o
+routines make use of this:
+
+(a) Buffered i/o:
+The routine submit_bh() invokes submit_bio() on a bio corresponding to the
+bh, allocating the bio if required. ll_rw_block() uses submit_bh() as before.
+
+(b) Kiobuf i/o (for raw/direct i/o):
+The ll_rw_kio() routine breaks up the kiobuf into page sized chunks and
+maps the array to one or more multi-page bios, issuing submit_bio() to
+perform the i/o on each of these.
+
+The embedded bh array in the kiobuf structure has been removed and no
+preallocation of bios is done for kiobufs. [The intent is to remove the
+blocks array as well, but it's currently in there to kludge around direct i/o.]
+Thus kiobuf allocation has switched back to using kmalloc rather than vmalloc.
+
+Todo/Observation:
+
+ A single kiobuf structure is assumed to correspond to a contiguous range
+ of data, so brw_kiovec() invokes ll_rw_kio for each kiobuf in a kiovec.
+ So right now it wouldn't work for direct i/o on non-contiguous blocks.
+ This is to be resolved.  The eventual direction is to replace kiobuf
+ by kvec's.
+
+ Badari Pulavarty has a patch to implement direct i/o correctly using
+ bio and kvec.
+
+
+(c) Page i/o:
+Todo/Under discussion:
+
+ Andrew Morton's multi-page bio patches attempt to issue multi-page
+ writeouts (and reads) from the page cache, by directly building up
+ large bios for submission completely bypassing the usage of buffer
+ heads. This work is still in progress.
+
+ Christoph Hellwig had some code that uses bios for page-io (rather than
+ bh). This isn't included in bio as yet. Christoph was also working on a
+ design for representing virtual/real extents as an entity and modifying
+ some of the address space ops interfaces to utilize this abstraction rather
+ than buffer_heads. (This is somewhat along the lines of the SGI XFS pagebuf
+ abstraction, but intended to be as lightweight as possible).
+
+(d) Direct access i/o:
+Direct access requests that do not contain bios would be submitted differently
+as discussed earlier in section 1.3.
+
+Aside:
+
+  Kvec i/o:
+
+  Ben LaHaise's aio code uses a slightly different structure instead
+  of kiobufs, called a kvec_cb. This contains an array of <page, offset, len>
+  tuples (very much like the networking code), together with a callback function
+  and data pointer. This is embedded into a brw_cb structure when passed
+  to brw_kvec_async().
+
+  Now it should be possible to directly map these kvecs to a bio. Just as while
+  cloning, in this case rather than PRE_BUILT bio_vecs, we set the bi_io_vec
+  array pointer to point to the veclet array in kvecs.
+
+  TBD: In order for this to work, some changes are needed in the way multi-page
+  bios are handled today. The values of the tuples in such a vector passed in
+  from higher level code should not be modified by the block layer in the course
+  of its request processing, since that would make it hard for the higher layer
+  to continue to use the vector descriptor (kvec) after i/o completes. Instead,
+  all such transient state should either be maintained in the request structure,
+  and passed on in some way to the endio completion routine.
+
+
+4. The I/O scheduler
+I/O scheduler, a.k.a. elevator, is implemented in two layers.  Generic dispatch
+queue and specific I/O schedulers.  Unless stated otherwise, elevator is used
+to refer to both parts and I/O scheduler to specific I/O schedulers.
+
+Block layer implements generic dispatch queue in block/*.c.
+The generic dispatch queue is responsible for requeueing, handling non-fs
+requests and all other subtleties.
+
+Specific I/O schedulers are responsible for ordering normal filesystem
+requests.  They can also choose to delay certain requests to improve
+throughput or whatever purpose.  As the plural form indicates, there are
+multiple I/O schedulers.  They can be built as modules but at least one should
+be built inside the kernel.  Each queue can choose different one and can also
+change to another one dynamically.
+
+A block layer call to the i/o scheduler follows the convention elv_xxx(). This
+calls elevator_xxx_fn in the elevator switch (block/elevator.c). Oh, xxx
+and xxx might not match exactly, but use your imagination. If an elevator
+doesn't implement a function, the switch does nothing or some minimal house
+keeping work.
+
+4.1. I/O scheduler API
+
+The functions an elevator may implement are: (* are mandatory)
+elevator_merge_fn		called to query requests for merge with a bio
+
+elevator_merge_req_fn		called when two requests get merged. the one
+				which gets merged into the other one will be
+				never seen by I/O scheduler again. IOW, after
+				being merged, the request is gone.
+
+elevator_merged_fn		called when a request in the scheduler has been
+				involved in a merge. It is used in the deadline
+				scheduler for example, to reposition the request
+				if its sorting order has changed.
+
+elevator_allow_merge_fn		called whenever the block layer determines
+				that a bio can be merged into an existing
+				request safely. The io scheduler may still
+				want to stop a merge at this point if it
+				results in some sort of conflict internally,
+				this hook allows it to do that. Note however
+				that two *requests* can still be merged at later
+				time. Currently the io scheduler has no way to
+				prevent that. It can only learn about the fact
+				from elevator_merge_req_fn callback.
+
+elevator_dispatch_fn*		fills the dispatch queue with ready requests.
+				I/O schedulers are free to postpone requests by
+				not filling the dispatch queue unless @force
+				is non-zero.  Once dispatched, I/O schedulers
+				are not allowed to manipulate the requests -
+				they belong to generic dispatch queue.
+
+elevator_add_req_fn*		called to add a new request into the scheduler
+
+elevator_former_req_fn
+elevator_latter_req_fn		These return the request before or after the
+				one specified in disk sort order. Used by the
+				block layer to find merge possibilities.
+
+elevator_completed_req_fn	called when a request is completed.
+
+elevator_may_queue_fn		returns true if the scheduler wants to allow the
+				current context to queue a new request even if
+				it is over the queue limit. This must be used
+				very carefully!!
+
+elevator_set_req_fn
+elevator_put_req_fn		Must be used to allocate and free any elevator
+				specific storage for a request.
+
+elevator_activate_req_fn	Called when device driver first sees a request.
+				I/O schedulers can use this callback to
+				determine when actual execution of a request
+				starts.
+elevator_deactivate_req_fn	Called when device driver decides to delay
+				a request by requeueing it.
+
+elevator_init_fn*
+elevator_exit_fn		Allocate and free any elevator specific storage
+				for a queue.
+
+4.2 Request flows seen by I/O schedulers
+All requests seen by I/O schedulers strictly follow one of the following three
+flows.
+
+ set_req_fn ->
+
+ i.   add_req_fn -> (merged_fn ->)* -> dispatch_fn -> activate_req_fn ->
+      (deactivate_req_fn -> activate_req_fn ->)* -> completed_req_fn
+ ii.  add_req_fn -> (merged_fn ->)* -> merge_req_fn
+ iii. [none]
+
+ -> put_req_fn
+
+4.3 I/O scheduler implementation
+The generic i/o scheduler algorithm attempts to sort/merge/batch requests for
+optimal disk scan and request servicing performance (based on generic
+principles and device capabilities), optimized for:
+i.   improved throughput
+ii.  improved latency
+iii. better utilization of h/w & CPU time
+
+Characteristics:
+
+i. Binary tree
+AS and deadline i/o schedulers use red black binary trees for disk position
+sorting and searching, and a fifo linked list for time-based searching. This
+gives good scalability and good availability of information. Requests are
+almost always dispatched in disk sort order, so a cache is kept of the next
+request in sort order to prevent binary tree lookups.
+
+This arrangement is not a generic block layer characteristic however, so
+elevators may implement queues as they please.
+
+ii. Merge hash
+AS and deadline use a hash table indexed by the last sector of a request. This
+enables merging code to quickly look up "back merge" candidates, even when
+multiple I/O streams are being performed at once on one disk.
+
+"Front merges", a new request being merged at the front of an existing request,
+are far less common than "back merges" due to the nature of most I/O patterns.
+Front merges are handled by the binary trees in AS and deadline schedulers.
+
+iii. Plugging the queue to batch requests in anticipation of opportunities for
+     merge/sort optimizations
+
+Plugging is an approach that the current i/o scheduling algorithm resorts to so
+that it collects up enough requests in the queue to be able to take
+advantage of the sorting/merging logic in the elevator. If the
+queue is empty when a request comes in, then it plugs the request queue
+(sort of like plugging the bath tub of a vessel to get fluid to build up)
+till it fills up with a few more requests, before starting to service
+the requests. This provides an opportunity to merge/sort the requests before
+passing them down to the device. There are various conditions when the queue is
+unplugged (to open up the flow again), either through a scheduled task or
+could be on demand. For example wait_on_buffer sets the unplugging going
+through sync_buffer() running blk_run_address_space(mapping). Or the caller
+can do it explicity through blk_unplug(bdev). So in the read case,
+the queue gets explicitly unplugged as part of waiting for completion on that
+buffer. For page driven IO, the address space ->sync_page() takes care of
+doing the blk_run_address_space().
+
+Aside:
+  This is kind of controversial territory, as it's not clear if plugging is
+  always the right thing to do. Devices typically have their own queues,
+  and allowing a big queue to build up in software, while letting the device be
+  idle for a while may not always make sense. The trick is to handle the fine
+  balance between when to plug and when to open up. Also now that we have
+  multi-page bios being queued in one shot, we may not need to wait to merge
+  a big request from the broken up pieces coming by.
+
+4.4 I/O contexts
+I/O contexts provide a dynamically allocated per process data area. They may
+be used in I/O schedulers, and in the block layer (could be used for IO statis,
+priorities for example). See *io_context in block/ll_rw_blk.c, and as-iosched.c
+for an example of usage in an i/o scheduler.
+
+
+5. Scalability related changes
+
+5.1 Granular Locking: io_request_lock replaced by a per-queue lock
+
+The global io_request_lock has been removed as of 2.5, to avoid
+the scalability bottleneck it was causing, and has been replaced by more
+granular locking. The request queue structure has a pointer to the
+lock to be used for that queue. As a result, locking can now be
+per-queue, with a provision for sharing a lock across queues if
+necessary (e.g the scsi layer sets the queue lock pointers to the
+corresponding adapter lock, which results in a per host locking
+granularity). The locking semantics are the same, i.e. locking is
+still imposed by the block layer, grabbing the lock before
+request_fn execution which it means that lots of older drivers
+should still be SMP safe. Drivers are free to drop the queue
+lock themselves, if required. Drivers that explicitly used the
+io_request_lock for serialization need to be modified accordingly.
+Usually it's as easy as adding a global lock:
+
+	static DEFINE_SPINLOCK(my_driver_lock);
+
+and passing the address to that lock to blk_init_queue().
+
+5.2 64 bit sector numbers (sector_t prepares for 64 bit support)
+
+The sector number used in the bio structure has been changed to sector_t,
+which could be defined as 64 bit in preparation for 64 bit sector support.
+
+6. Other Changes/Implications
+
+6.1 Partition re-mapping handled by the generic block layer
+
+In 2.5 some of the gendisk/partition related code has been reorganized.
+Now the generic block layer performs partition-remapping early and thus
+provides drivers with a sector number relative to whole device, rather than
+having to take partition number into account in order to arrive at the true
+sector number. The routine blk_partition_remap() is invoked by
+generic_make_request even before invoking the queue specific make_request_fn,
+so the i/o scheduler also gets to operate on whole disk sector numbers. This
+should typically not require changes to block drivers, it just never gets
+to invoke its own partition sector offset calculations since all bios
+sent are offset from the beginning of the device.
+
+
+7. A Few Tips on Migration of older drivers
+
+Old-style drivers that just use CURRENT and ignores clustered requests,
+may not need much change.  The generic layer will automatically handle
+clustered requests, multi-page bios, etc for the driver.
+
+For a low performance driver or hardware that is PIO driven or just doesn't
+support scatter-gather changes should be minimal too.
+
+The following are some points to keep in mind when converting old drivers
+to bio.
+
+Drivers should use elv_next_request to pick up requests and are no longer
+supposed to handle looping directly over the request list.
+(struct request->queue has been removed)
+
+Now end_that_request_first takes an additional number_of_sectors argument.
+It used to handle always just the first buffer_head in a request, now
+it will loop and handle as many sectors (on a bio-segment granularity)
+as specified.
+
+Now bh->b_end_io is replaced by bio->bi_end_io, but most of the time the
+right thing to use is bio_endio(bio, uptodate) instead.
+
+If the driver is dropping the io_request_lock from its request_fn strategy,
+then it just needs to replace that with q->queue_lock instead.
+
+As described in Sec 1.1, drivers can set max sector size, max segment size
+etc per queue now. Drivers that used to define their own merge functions i
+to handle things like this can now just use the blk_queue_* functions at
+blk_init_queue time.
+
+Drivers no longer have to map a {partition, sector offset} into the
+correct absolute location anymore, this is done by the block layer, so
+where a driver received a request ala this before:
+
+	rq->rq_dev = mk_kdev(3, 5);	/* /dev/hda5 */
+	rq->sector = 0;			/* first sector on hda5 */
+
+  it will now see
+
+	rq->rq_dev = mk_kdev(3, 0);	/* /dev/hda */
+	rq->sector = 123128;		/* offset from start of disk */
+
+As mentioned, there is no virtual mapping of a bio. For DMA, this is
+not a problem as the driver probably never will need a virtual mapping.
+Instead it needs a bus mapping (dma_map_page for a single segment or
+use dma_map_sg for scatter gather) to be able to ship it to the driver. For
+PIO drivers (or drivers that need to revert to PIO transfer once in a
+while (IDE for example)), where the CPU is doing the actual data
+transfer a virtual mapping is needed. If the driver supports highmem I/O,
+(Sec 1.1, (ii) ) it needs to use __bio_kmap_atomic and bio_kmap_irq to
+temporarily map a bio into the virtual address space.
+
+
+8. Prior/Related/Impacted patches
+
+8.1. Earlier kiobuf patches (sct/axboe/chait/hch/mkp)
+- orig kiobuf & raw i/o patches (now in 2.4 tree)
+- direct kiobuf based i/o to devices (no intermediate bh's)
+- page i/o using kiobuf
+- kiobuf splitting for lvm (mkp)
+- elevator support for kiobuf request merging (axboe)
+8.2. Zero-copy networking (Dave Miller)
+8.3. SGI XFS - pagebuf patches - use of kiobufs
+8.4. Multi-page pioent patch for bio (Christoph Hellwig)
+8.5. Direct i/o implementation (Andrea Arcangeli) since 2.4.10-pre11
+8.6. Async i/o implementation patch (Ben LaHaise)
+8.7. EVMS layering design (IBM EVMS team)
+8.8. Larger page cache size patch (Ben LaHaise) and
+     Large page size (Daniel Phillips)
+    => larger contiguous physical memory buffers
+8.9. VM reservations patch (Ben LaHaise)
+8.10. Write clustering patches ? (Marcelo/Quintela/Riel ?)
+8.11. Block device in page cache patch (Andrea Archangeli) - now in 2.4.10+
+8.12. Multiple block-size transfers for faster raw i/o (Shailabh Nagar,
+      Badari)
+8.13  Priority based i/o scheduler - prepatches (Arjan van de Ven)
+8.14  IDE Taskfile i/o patch (Andre Hedrick)
+8.15  Multi-page writeout and readahead patches (Andrew Morton)
+8.16  Direct i/o patches for 2.5 using kvec and bio (Badari Pulavarthy)
+
+9. Other References:
+
+9.1 The Splice I/O Model - Larry McVoy (and subsequent discussions on lkml,
+and Linus' comments - Jan 2001)
+9.2 Discussions about kiobuf and bh design on lkml between sct, linus, alan
+et al - Feb-March 2001 (many of the initial thoughts that led to bio were
+brought up in this discussion thread)
+9.3 Discussions on mempool on lkml - Dec 2001.
+
diff --git a/kernel/Documentation/block/biovecs.txt b/kernel/Documentation/block/biovecs.txt
new file mode 100644
index 000000000..74a32ad52
--- /dev/null
+++ b/kernel/Documentation/block/biovecs.txt
@@ -0,0 +1,111 @@
+
+Immutable biovecs and biovec iterators:
+=======================================
+
+Kent Overstreet <kmo@daterainc.com>
+
+As of 3.13, biovecs should never be modified after a bio has been submitted.
+Instead, we have a new struct bvec_iter which represents a range of a biovec -
+the iterator will be modified as the bio is completed, not the biovec.
+
+More specifically, old code that needed to partially complete a bio would
+update bi_sector and bi_size, and advance bi_idx to the next biovec. If it
+ended up partway through a biovec, it would increment bv_offset and decrement
+bv_len by the number of bytes completed in that biovec.
+
+In the new scheme of things, everything that must be mutated in order to
+partially complete a bio is segregated into struct bvec_iter: bi_sector,
+bi_size and bi_idx have been moved there; and instead of modifying bv_offset
+and bv_len, struct bvec_iter has bi_bvec_done, which represents the number of
+bytes completed in the current bvec.
+
+There are a bunch of new helper macros for hiding the gory details - in
+particular, presenting the illusion of partially completed biovecs so that
+normal code doesn't have to deal with bi_bvec_done.
+
+ * Driver code should no longer refer to biovecs directly; we now have
+   bio_iovec() and bio_iovec_iter() macros that return literal struct biovecs,
+   constructed from the raw biovecs but taking into account bi_bvec_done and
+   bi_size.
+
+   bio_for_each_segment() has been updated to take a bvec_iter argument
+   instead of an integer (that corresponded to bi_idx); for a lot of code the
+   conversion just required changing the types of the arguments to
+   bio_for_each_segment().
+
+ * Advancing a bvec_iter is done with bio_advance_iter(); bio_advance() is a
+   wrapper around bio_advance_iter() that operates on bio->bi_iter, and also
+   advances the bio integrity's iter if present.
+
+   There is a lower level advance function - bvec_iter_advance() - which takes
+   a pointer to a biovec, not a bio; this is used by the bio integrity code.
+
+What's all this get us?
+=======================
+
+Having a real iterator, and making biovecs immutable, has a number of
+advantages:
+
+ * Before, iterating over bios was very awkward when you weren't processing
+   exactly one bvec at a time - for example, bio_copy_data() in fs/bio.c,
+   which copies the contents of one bio into another. Because the biovecs
+   wouldn't necessarily be the same size, the old code was tricky convoluted -
+   it had to walk two different bios at the same time, keeping both bi_idx and
+   and offset into the current biovec for each.
+
+   The new code is much more straightforward - have a look. This sort of
+   pattern comes up in a lot of places; a lot of drivers were essentially open
+   coding bvec iterators before, and having common implementation considerably
+   simplifies a lot of code.
+
+ * Before, any code that might need to use the biovec after the bio had been
+   completed (perhaps to copy the data somewhere else, or perhaps to resubmit
+   it somewhere else if there was an error) had to save the entire bvec array
+   - again, this was being done in a fair number of places.
+
+ * Biovecs can be shared between multiple bios - a bvec iter can represent an
+   arbitrary range of an existing biovec, both starting and ending midway
+   through biovecs. This is what enables efficient splitting of arbitrary
+   bios. Note that this means we _only_ use bi_size to determine when we've
+   reached the end of a bio, not bi_vcnt - and the bio_iovec() macro takes
+   bi_size into account when constructing biovecs.
+
+ * Splitting bios is now much simpler. The old bio_split() didn't even work on
+   bios with more than a single bvec! Now, we can efficiently split arbitrary
+   size bios - because the new bio can share the old bio's biovec.
+
+   Care must be taken to ensure the biovec isn't freed while the split bio is
+   still using it, in case the original bio completes first, though. Using
+   bio_chain() when splitting bios helps with this.
+
+ * Submitting partially completed bios is now perfectly fine - this comes up
+   occasionally in stacking block drivers and various code (e.g. md and
+   bcache) had some ugly workarounds for this.
+
+   It used to be the case that submitting a partially completed bio would work
+   fine to _most_ devices, but since accessing the raw bvec array was the
+   norm, not all drivers would respect bi_idx and those would break. Now,
+   since all drivers _must_ go through the bvec iterator - and have been
+   audited to make sure they are - submitting partially completed bios is
+   perfectly fine.
+
+Other implications:
+===================
+
+ * Almost all usage of bi_idx is now incorrect and has been removed; instead,
+   where previously you would have used bi_idx you'd now use a bvec_iter,
+   probably passing it to one of the helper macros.
+
+   I.e. instead of using bio_iovec_idx() (or bio->bi_iovec[bio->bi_idx]), you
+   now use bio_iter_iovec(), which takes a bvec_iter and returns a
+   literal struct bio_vec - constructed on the fly from the raw biovec but
+   taking into account bi_bvec_done (and bi_size).
+
+ * bi_vcnt can't be trusted or relied upon by driver code - i.e. anything that
+   doesn't actually own the bio. The reason is twofold: firstly, it's not
+   actually needed for iterating over the bio anymore - we only use bi_size.
+   Secondly, when cloning a bio and reusing (a portion of) the original bio's
+   biovec, in order to calculate bi_vcnt for the new bio we'd have to iterate
+   over all the biovecs in the new bio - which is silly as it's not needed.
+
+   So, don't use bi_vcnt anymore.
diff --git a/kernel/Documentation/block/capability.txt b/kernel/Documentation/block/capability.txt
new file mode 100644
index 000000000..2f1729424
--- /dev/null
+++ b/kernel/Documentation/block/capability.txt
@@ -0,0 +1,15 @@
+Generic Block Device Capability
+===============================================================================
+This file documents the sysfs file block/<disk>/capability
+
+capability is a hex word indicating which capabilities a specific disk
+supports.  For more information on bits not listed here, see
+include/linux/genhd.h
+
+Capability				Value
+-------------------------------------------------------------------------------
+GENHD_FL_MEDIA_CHANGE_NOTIFY		4
+	When this bit is set, the disk supports Asynchronous Notification
+	of media change events.  These events will be broadcast to user
+	space via kernel uevent.
+
diff --git a/kernel/Documentation/block/cfq-iosched.txt b/kernel/Documentation/block/cfq-iosched.txt
new file mode 100644
index 000000000..f3bc72945
--- /dev/null
+++ b/kernel/Documentation/block/cfq-iosched.txt
@@ -0,0 +1,292 @@
+CFQ (Complete Fairness Queueing)
+===============================
+
+The main aim of CFQ scheduler is to provide a fair allocation of the disk
+I/O bandwidth for all the processes which requests an I/O operation.
+
+CFQ maintains the per process queue for the processes which request I/O
+operation(synchronous requests). In case of asynchronous requests, all the
+requests from all the processes are batched together according to their
+process's I/O priority.
+
+CFQ ioscheduler tunables
+========================
+
+slice_idle
+----------
+This specifies how long CFQ should idle for next request on certain cfq queues
+(for sequential workloads) and service trees (for random workloads) before
+queue is expired and CFQ selects next queue to dispatch from.
+
+By default slice_idle is a non-zero value. That means by default we idle on
+queues/service trees. This can be very helpful on highly seeky media like
+single spindle SATA/SAS disks where we can cut down on overall number of
+seeks and see improved throughput.
+
+Setting slice_idle to 0 will remove all the idling on queues/service tree
+level and one should see an overall improved throughput on faster storage
+devices like multiple SATA/SAS disks in hardware RAID configuration. The down
+side is that isolation provided from WRITES also goes down and notion of
+IO priority becomes weaker.
+
+So depending on storage and workload, it might be useful to set slice_idle=0.
+In general I think for SATA/SAS disks and software RAID of SATA/SAS disks
+keeping slice_idle enabled should be useful. For any configurations where
+there are multiple spindles behind single LUN (Host based hardware RAID
+controller or for storage arrays), setting slice_idle=0 might end up in better
+throughput and acceptable latencies.
+
+back_seek_max
+-------------
+This specifies, given in Kbytes, the maximum "distance" for backward seeking.
+The distance is the amount of space from the current head location to the
+sectors that are backward in terms of distance.
+
+This parameter allows the scheduler to anticipate requests in the "backward"
+direction and consider them as being the "next" if they are within this
+distance from the current head location.
+
+back_seek_penalty
+-----------------
+This parameter is used to compute the cost of backward seeking. If the
+backward distance of request is just 1/back_seek_penalty from a "front"
+request, then the seeking cost of two requests is considered equivalent.
+
+So scheduler will not bias toward one or the other request (otherwise scheduler
+will bias toward front request). Default value of back_seek_penalty is 2.
+
+fifo_expire_async
+-----------------
+This parameter is used to set the timeout of asynchronous requests. Default
+value of this is 248ms.
+
+fifo_expire_sync
+----------------
+This parameter is used to set the timeout of synchronous requests. Default
+value of this is 124ms. In case to favor synchronous requests over asynchronous
+one, this value should be decreased relative to fifo_expire_async.
+
+group_idle
+-----------
+This parameter forces idling at the CFQ group level instead of CFQ
+queue level. This was introduced after a bottleneck was observed
+in higher end storage due to idle on sequential queue and allow dispatch
+from a single queue. The idea with this parameter is that it can be run with
+slice_idle=0 and group_idle=8, so that idling does not happen on individual
+queues in the group but happens overall on the group and thus still keeps the
+IO controller working.
+Not idling on individual queues in the group will dispatch requests from
+multiple queues in the group at the same time and achieve higher throughput
+on higher end storage.
+
+Default value for this parameter is 8ms.
+
+latency
+-------
+This parameter is used to enable/disable the latency mode of the CFQ
+scheduler. If latency mode (called low_latency) is enabled, CFQ tries
+to recompute the slice time for each process based on the target_latency set
+for the system. This favors fairness over throughput. Disabling low
+latency (setting it to 0) ignores target latency, allowing each process in the
+system to get a full time slice.
+
+By default low latency mode is enabled.
+
+target_latency
+--------------
+This parameter is used to calculate the time slice for a process if cfq's
+latency mode is enabled. It will ensure that sync requests have an estimated
+latency. But if sequential workload is higher(e.g. sequential read),
+then to meet the latency constraints, throughput may decrease because of less
+time for each process to issue I/O request before the cfq queue is switched.
+
+Though this can be overcome by disabling the latency_mode, it may increase
+the read latency for some applications. This parameter allows for changing
+target_latency through the sysfs interface which can provide the balanced
+throughput and read latency.
+
+Default value for target_latency is 300ms.
+
+slice_async
+-----------
+This parameter is same as of slice_sync but for asynchronous queue. The
+default value is 40ms.
+
+slice_async_rq
+--------------
+This parameter is used to limit the dispatching of asynchronous request to
+device request queue in queue's slice time. The maximum number of request that
+are allowed to be dispatched also depends upon the io priority. Default value
+for this is 2.
+
+slice_sync
+----------
+When a queue is selected for execution, the queues IO requests are only
+executed for a certain amount of time(time_slice) before switching to another
+queue. This parameter is used to calculate the time slice of synchronous
+queue.
+
+time_slice is computed using the below equation:-
+time_slice = slice_sync + (slice_sync/5 * (4 - prio)). To increase the
+time_slice of synchronous queue, increase the value of slice_sync. Default
+value is 100ms.
+
+quantum
+-------
+This specifies the number of request dispatched to the device queue. In a
+queue's time slice, a request will not be dispatched if the number of request
+in the device exceeds this parameter. This parameter is used for synchronous
+request.
+
+In case of storage with several disk, this setting can limit the parallel
+processing of request. Therefore, increasing the value can improve the
+performance although this can cause the latency of some I/O to increase due
+to more number of requests.
+
+CFQ Group scheduling
+====================
+
+CFQ supports blkio cgroup and has "blkio." prefixed files in each
+blkio cgroup directory. It is weight-based and there are four knobs
+for configuration - weight[_device] and leaf_weight[_device].
+Internal cgroup nodes (the ones with children) can also have tasks in
+them, so the former two configure how much proportion the cgroup as a
+whole is entitled to at its parent's level while the latter two
+configure how much proportion the tasks in the cgroup have compared to
+its direct children.
+
+Another way to think about it is assuming that each internal node has
+an implicit leaf child node which hosts all the tasks whose weight is
+configured by leaf_weight[_device]. Let's assume a blkio hierarchy
+composed of five cgroups - root, A, B, AA and AB - with the following
+weights where the names represent the hierarchy.
+
+        weight leaf_weight
+ root :  125    125
+ A    :  500    750
+ B    :  250    500
+ AA   :  500    500
+ AB   : 1000    500
+
+root never has a parent making its weight is meaningless. For backward
+compatibility, weight is always kept in sync with leaf_weight. B, AA
+and AB have no child and thus its tasks have no children cgroup to
+compete with. They always get 100% of what the cgroup won at the
+parent level. Considering only the weights which matter, the hierarchy
+looks like the following.
+
+          root
+       /    |   \
+      A     B    leaf
+     500   250   125
+   /  |  \
+  AA  AB  leaf
+ 500 1000 750
+
+If all cgroups have active IOs and competing with each other, disk
+time will be distributed like the following.
+
+Distribution below root. The total active weight at this level is
+A:500 + B:250 + C:125 = 875.
+
+ root-leaf :   125 /  875      =~ 14%
+ A         :   500 /  875      =~ 57%
+ B(-leaf)  :   250 /  875      =~ 28%
+
+A has children and further distributes its 57% among the children and
+the implicit leaf node. The total active weight at this level is
+AA:500 + AB:1000 + A-leaf:750 = 2250.
+
+ A-leaf    : ( 750 / 2250) * A =~ 19%
+ AA(-leaf) : ( 500 / 2250) * A =~ 12%
+ AB(-leaf) : (1000 / 2250) * A =~ 25%
+
+CFQ IOPS Mode for group scheduling
+===================================
+Basic CFQ design is to provide priority based time slices. Higher priority
+process gets bigger time slice and lower priority process gets smaller time
+slice. Measuring time becomes harder if storage is fast and supports NCQ and
+it would be better to dispatch multiple requests from multiple cfq queues in
+request queue at a time. In such scenario, it is not possible to measure time
+consumed by single queue accurately.
+
+What is possible though is to measure number of requests dispatched from a
+single queue and also allow dispatch from multiple cfq queue at the same time.
+This effectively becomes the fairness in terms of IOPS (IO operations per
+second).
+
+If one sets slice_idle=0 and if storage supports NCQ, CFQ internally switches
+to IOPS mode and starts providing fairness in terms of number of requests
+dispatched. Note that this mode switching takes effect only for group
+scheduling. For non-cgroup users nothing should change.
+
+CFQ IO scheduler Idling Theory
+===============================
+Idling on a queue is primarily about waiting for the next request to come
+on same queue after completion of a request. In this process CFQ will not
+dispatch requests from other cfq queues even if requests are pending there.
+
+The rationale behind idling is that it can cut down on number of seeks
+on rotational media. For example, if a process is doing dependent
+sequential reads (next read will come on only after completion of previous
+one), then not dispatching request from other queue should help as we
+did not move the disk head and kept on dispatching sequential IO from
+one queue.
+
+CFQ has following service trees and various queues are put on these trees.
+
+	sync-idle	sync-noidle	async
+
+All cfq queues doing synchronous sequential IO go on to sync-idle tree.
+On this tree we idle on each queue individually.
+
+All synchronous non-sequential queues go on sync-noidle tree. Also any
+request which are marked with REQ_NOIDLE go on this service tree. On this
+tree we do not idle on individual queues instead idle on the whole group
+of queues or the tree. So if there are 4 queues waiting for IO to dispatch
+we will idle only once last queue has dispatched the IO and there is
+no more IO on this service tree.
+
+All async writes go on async service tree. There is no idling on async
+queues.
+
+CFQ has some optimizations for SSDs and if it detects a non-rotational
+media which can support higher queue depth (multiple requests at in
+flight at a time), then it cuts down on idling of individual queues and
+all the queues move to sync-noidle tree and only tree idle remains. This
+tree idling provides isolation with buffered write queues on async tree.
+
+FAQ
+===
+Q1. Why to idle at all on queues marked with REQ_NOIDLE.
+
+A1. We only do tree idle (all queues on sync-noidle tree) on queues marked
+    with REQ_NOIDLE. This helps in providing isolation with all the sync-idle
+    queues. Otherwise in presence of many sequential readers, other
+    synchronous IO might not get fair share of disk.
+
+    For example, if there are 10 sequential readers doing IO and they get
+    100ms each. If a REQ_NOIDLE request comes in, it will be scheduled
+    roughly after 1 second. If after completion of REQ_NOIDLE request we
+    do not idle, and after a couple of milli seconds a another REQ_NOIDLE
+    request comes in, again it will be scheduled after 1second. Repeat it
+    and notice how a workload can lose its disk share and suffer due to
+    multiple sequential readers.
+
+    fsync can generate dependent IO where bunch of data is written in the
+    context of fsync, and later some journaling data is written. Journaling
+    data comes in only after fsync has finished its IO (atleast for ext4
+    that seemed to be the case). Now if one decides not to idle on fsync
+    thread due to REQ_NOIDLE, then next journaling write will not get
+    scheduled for another second. A process doing small fsync, will suffer
+    badly in presence of multiple sequential readers.
+
+    Hence doing tree idling on threads using REQ_NOIDLE flag on requests
+    provides isolation from multiple sequential readers and at the same
+    time we do not idle on individual threads.
+
+Q2. When to specify REQ_NOIDLE
+A2. I would think whenever one is doing synchronous write and not expecting
+    more writes to be dispatched from same context soon, should be able
+    to specify REQ_NOIDLE on writes and that probably should work well for
+    most of the cases.
diff --git a/kernel/Documentation/block/cmdline-partition.txt b/kernel/Documentation/block/cmdline-partition.txt
new file mode 100644
index 000000000..525b9f6d7
--- /dev/null
+++ b/kernel/Documentation/block/cmdline-partition.txt
@@ -0,0 +1,39 @@
+Embedded device command line partition parsing
+=====================================================================
+
+Support for reading the block device partition table from the command line.
+It is typically used for fixed block (eMMC) embedded devices.
+It has no MBR, so saves storage space. Bootloader can be easily accessed
+by absolute address of data on the block device.
+Users can easily change the partition.
+
+The format for the command line is just like mtdparts:
+
+blkdevparts=<blkdev-def>[;<blkdev-def>]
+  <blkdev-def> := <blkdev-id>:<partdef>[,<partdef>]
+    <partdef> := <size>[@<offset>](part-name)
+
+<blkdev-id>
+    block device disk name, embedded device used fixed block device,
+    it's disk name also fixed. such as: mmcblk0, mmcblk1, mmcblk0boot0.
+
+<size>
+    partition size, in bytes, such as: 512, 1m, 1G.
+
+<offset>
+    partition start address, in bytes.
+
+(part-name)
+    partition name, kernel send uevent with "PARTNAME". application can create
+    a link to block device partition with the name "PARTNAME".
+    user space application can access partition by partition name.
+
+Example:
+    eMMC disk name is "mmcblk0" and "mmcblk0boot0"
+
+  bootargs:
+    'blkdevparts=mmcblk0:1G(data0),1G(data1),-;mmcblk0boot0:1m(boot),-(kernel)'
+
+  dmesg:
+    mmcblk0: p1(data0) p2(data1) p3()
+    mmcblk0boot0: p1(boot) p2(kernel)
diff --git a/kernel/Documentation/block/data-integrity.txt b/kernel/Documentation/block/data-integrity.txt
new file mode 100644
index 000000000..f56ec97f0
--- /dev/null
+++ b/kernel/Documentation/block/data-integrity.txt
@@ -0,0 +1,283 @@
+----------------------------------------------------------------------
+1. INTRODUCTION
+
+Modern filesystems feature checksumming of data and metadata to
+protect against data corruption.  However, the detection of the
+corruption is done at read time which could potentially be months
+after the data was written.  At that point the original data that the
+application tried to write is most likely lost.
+
+The solution is to ensure that the disk is actually storing what the
+application meant it to.  Recent additions to both the SCSI family
+protocols (SBC Data Integrity Field, SCC protection proposal) as well
+as SATA/T13 (External Path Protection) try to remedy this by adding
+support for appending integrity metadata to an I/O.  The integrity
+metadata (or protection information in SCSI terminology) includes a
+checksum for each sector as well as an incrementing counter that
+ensures the individual sectors are written in the right order.  And
+for some protection schemes also that the I/O is written to the right
+place on disk.
+
+Current storage controllers and devices implement various protective
+measures, for instance checksumming and scrubbing.  But these
+technologies are working in their own isolated domains or at best
+between adjacent nodes in the I/O path.  The interesting thing about
+DIF and the other integrity extensions is that the protection format
+is well defined and every node in the I/O path can verify the
+integrity of the I/O and reject it if corruption is detected.  This
+allows not only corruption prevention but also isolation of the point
+of failure.
+
+----------------------------------------------------------------------
+2. THE DATA INTEGRITY EXTENSIONS
+
+As written, the protocol extensions only protect the path between
+controller and storage device.  However, many controllers actually
+allow the operating system to interact with the integrity metadata
+(IMD).  We have been working with several FC/SAS HBA vendors to enable
+the protection information to be transferred to and from their
+controllers.
+
+The SCSI Data Integrity Field works by appending 8 bytes of protection
+information to each sector.  The data + integrity metadata is stored
+in 520 byte sectors on disk.  Data + IMD are interleaved when
+transferred between the controller and target.  The T13 proposal is
+similar.
+
+Because it is highly inconvenient for operating systems to deal with
+520 (and 4104) byte sectors, we approached several HBA vendors and
+encouraged them to allow separation of the data and integrity metadata
+scatter-gather lists.
+
+The controller will interleave the buffers on write and split them on
+read.  This means that Linux can DMA the data buffers to and from
+host memory without changes to the page cache.
+
+Also, the 16-bit CRC checksum mandated by both the SCSI and SATA specs
+is somewhat heavy to compute in software.  Benchmarks found that
+calculating this checksum had a significant impact on system
+performance for a number of workloads.  Some controllers allow a
+lighter-weight checksum to be used when interfacing with the operating
+system.  Emulex, for instance, supports the TCP/IP checksum instead.
+The IP checksum received from the OS is converted to the 16-bit CRC
+when writing and vice versa.  This allows the integrity metadata to be
+generated by Linux or the application at very low cost (comparable to
+software RAID5).
+
+The IP checksum is weaker than the CRC in terms of detecting bit
+errors.  However, the strength is really in the separation of the data
+buffers and the integrity metadata.  These two distinct buffers must
+match up for an I/O to complete.
+
+The separation of the data and integrity metadata buffers as well as
+the choice in checksums is referred to as the Data Integrity
+Extensions.  As these extensions are outside the scope of the protocol
+bodies (T10, T13), Oracle and its partners are trying to standardize
+them within the Storage Networking Industry Association.
+
+----------------------------------------------------------------------
+3. KERNEL CHANGES
+
+The data integrity framework in Linux enables protection information
+to be pinned to I/Os and sent to/received from controllers that
+support it.
+
+The advantage to the integrity extensions in SCSI and SATA is that
+they enable us to protect the entire path from application to storage
+device.  However, at the same time this is also the biggest
+disadvantage. It means that the protection information must be in a
+format that can be understood by the disk.
+
+Generally Linux/POSIX applications are agnostic to the intricacies of
+the storage devices they are accessing.  The virtual filesystem switch
+and the block layer make things like hardware sector size and
+transport protocols completely transparent to the application.
+
+However, this level of detail is required when preparing the
+protection information to send to a disk.  Consequently, the very
+concept of an end-to-end protection scheme is a layering violation.
+It is completely unreasonable for an application to be aware whether
+it is accessing a SCSI or SATA disk.
+
+The data integrity support implemented in Linux attempts to hide this
+from the application.  As far as the application (and to some extent
+the kernel) is concerned, the integrity metadata is opaque information
+that's attached to the I/O.
+
+The current implementation allows the block layer to automatically
+generate the protection information for any I/O.  Eventually the
+intent is to move the integrity metadata calculation to userspace for
+user data.  Metadata and other I/O that originates within the kernel
+will still use the automatic generation interface.
+
+Some storage devices allow each hardware sector to be tagged with a
+16-bit value.  The owner of this tag space is the owner of the block
+device.  I.e. the filesystem in most cases.  The filesystem can use
+this extra space to tag sectors as they see fit.  Because the tag
+space is limited, the block interface allows tagging bigger chunks by
+way of interleaving.  This way, 8*16 bits of information can be
+attached to a typical 4KB filesystem block.
+
+This also means that applications such as fsck and mkfs will need
+access to manipulate the tags from user space.  A passthrough
+interface for this is being worked on.
+
+
+----------------------------------------------------------------------
+4. BLOCK LAYER IMPLEMENTATION DETAILS
+
+4.1 BIO
+
+The data integrity patches add a new field to struct bio when
+CONFIG_BLK_DEV_INTEGRITY is enabled.  bio_integrity(bio) returns a
+pointer to a struct bip which contains the bio integrity payload.
+Essentially a bip is a trimmed down struct bio which holds a bio_vec
+containing the integrity metadata and the required housekeeping
+information (bvec pool, vector count, etc.)
+
+A kernel subsystem can enable data integrity protection on a bio by
+calling bio_integrity_alloc(bio).  This will allocate and attach the
+bip to the bio.
+
+Individual pages containing integrity metadata can subsequently be
+attached using bio_integrity_add_page().
+
+bio_free() will automatically free the bip.
+
+
+4.2 BLOCK DEVICE
+
+Because the format of the protection data is tied to the physical
+disk, each block device has been extended with a block integrity
+profile (struct blk_integrity).  This optional profile is registered
+with the block layer using blk_integrity_register().
+
+The profile contains callback functions for generating and verifying
+the protection data, as well as getting and setting application tags.
+The profile also contains a few constants to aid in completing,
+merging and splitting the integrity metadata.
+
+Layered block devices will need to pick a profile that's appropriate
+for all subdevices.  blk_integrity_compare() can help with that.  DM
+and MD linear, RAID0 and RAID1 are currently supported.  RAID4/5/6
+will require extra work due to the application tag.
+
+
+----------------------------------------------------------------------
+5.0 BLOCK LAYER INTEGRITY API
+
+5.1 NORMAL FILESYSTEM
+
+    The normal filesystem is unaware that the underlying block device
+    is capable of sending/receiving integrity metadata.  The IMD will
+    be automatically generated by the block layer at submit_bio() time
+    in case of a WRITE.  A READ request will cause the I/O integrity
+    to be verified upon completion.
+
+    IMD generation and verification can be toggled using the
+
+      /sys/block/<bdev>/integrity/write_generate
+
+    and
+
+      /sys/block/<bdev>/integrity/read_verify
+
+    flags.
+
+
+5.2 INTEGRITY-AWARE FILESYSTEM
+
+    A filesystem that is integrity-aware can prepare I/Os with IMD
+    attached.  It can also use the application tag space if this is
+    supported by the block device.
+
+
+    int bio_integrity_prep(bio);
+
+      To generate IMD for WRITE and to set up buffers for READ, the
+      filesystem must call bio_integrity_prep(bio).
+
+      Prior to calling this function, the bio data direction and start
+      sector must be set, and the bio should have all data pages
+      added.  It is up to the caller to ensure that the bio does not
+      change while I/O is in progress.
+
+      bio_integrity_prep() should only be called if
+      bio_integrity_enabled() returned 1.
+
+
+5.3 PASSING EXISTING INTEGRITY METADATA
+
+    Filesystems that either generate their own integrity metadata or
+    are capable of transferring IMD from user space can use the
+    following calls:
+
+
+    struct bip * bio_integrity_alloc(bio, gfp_mask, nr_pages);
+
+      Allocates the bio integrity payload and hangs it off of the bio.
+      nr_pages indicate how many pages of protection data need to be
+      stored in the integrity bio_vec list (similar to bio_alloc()).
+
+      The integrity payload will be freed at bio_free() time.
+
+
+    int bio_integrity_add_page(bio, page, len, offset);
+
+      Attaches a page containing integrity metadata to an existing
+      bio.  The bio must have an existing bip,
+      i.e. bio_integrity_alloc() must have been called.  For a WRITE,
+      the integrity metadata in the pages must be in a format
+      understood by the target device with the notable exception that
+      the sector numbers will be remapped as the request traverses the
+      I/O stack.  This implies that the pages added using this call
+      will be modified during I/O!  The first reference tag in the
+      integrity metadata must have a value of bip->bip_sector.
+
+      Pages can be added using bio_integrity_add_page() as long as
+      there is room in the bip bio_vec array (nr_pages).
+
+      Upon completion of a READ operation, the attached pages will
+      contain the integrity metadata received from the storage device.
+      It is up to the receiver to process them and verify data
+      integrity upon completion.
+
+
+5.4 REGISTERING A BLOCK DEVICE AS CAPABLE OF EXCHANGING INTEGRITY
+    METADATA
+
+    To enable integrity exchange on a block device the gendisk must be
+    registered as capable:
+
+    int blk_integrity_register(gendisk, blk_integrity);
+
+      The blk_integrity struct is a template and should contain the
+      following:
+
+        static struct blk_integrity my_profile = {
+            .name                   = "STANDARDSBODY-TYPE-VARIANT-CSUM",
+            .generate_fn            = my_generate_fn,
+       	    .verify_fn              = my_verify_fn,
+	    .tuple_size             = sizeof(struct my_tuple_size),
+	    .tag_size               = <tag bytes per hw sector>,
+        };
+
+      'name' is a text string which will be visible in sysfs.  This is
+      part of the userland API so chose it carefully and never change
+      it.  The format is standards body-type-variant.
+      E.g. T10-DIF-TYPE1-IP or T13-EPP-0-CRC.
+
+      'generate_fn' generates appropriate integrity metadata (for WRITE).
+
+      'verify_fn' verifies that the data buffer matches the integrity
+      metadata.
+
+      'tuple_size' must be set to match the size of the integrity
+      metadata per sector.  I.e. 8 for DIF and EPP.
+
+      'tag_size' must be set to identify how many bytes of tag space
+      are available per hardware sector.  For DIF this is either 2 or
+      0 depending on the value of the Control Mode Page ATO bit.
+
+----------------------------------------------------------------------
+2007-12-24 Martin K. Petersen <martin.petersen@oracle.com>
diff --git a/kernel/Documentation/block/deadline-iosched.txt b/kernel/Documentation/block/deadline-iosched.txt
new file mode 100644
index 000000000..2d82c8032
--- /dev/null
+++ b/kernel/Documentation/block/deadline-iosched.txt
@@ -0,0 +1,75 @@
+Deadline IO scheduler tunables
+==============================
+
+This little file attempts to document how the deadline io scheduler works.
+In particular, it will clarify the meaning of the exposed tunables that may be
+of interest to power users.
+
+Selecting IO schedulers
+-----------------------
+Refer to Documentation/block/switching-sched.txt for information on
+selecting an io scheduler on a per-device basis.
+
+
+********************************************************************************
+
+
+read_expire	(in ms)
+-----------
+
+The goal of the deadline io scheduler is to attempt to guarantee a start
+service time for a request. As we focus mainly on read latencies, this is
+tunable. When a read request first enters the io scheduler, it is assigned
+a deadline that is the current time + the read_expire value in units of
+milliseconds.
+
+
+write_expire	(in ms)
+-----------
+
+Similar to read_expire mentioned above, but for writes.
+
+
+fifo_batch	(number of requests)
+----------
+
+Requests are grouped into ``batches'' of a particular data direction (read or
+write) which are serviced in increasing sector order.  To limit extra seeking,
+deadline expiries are only checked between batches.  fifo_batch controls the
+maximum number of requests per batch.
+
+This parameter tunes the balance between per-request latency and aggregate
+throughput.  When low latency is the primary concern, smaller is better (where
+a value of 1 yields first-come first-served behaviour).  Increasing fifo_batch
+generally improves throughput, at the cost of latency variation.
+
+
+writes_starved	(number of dispatches)
+--------------
+
+When we have to move requests from the io scheduler queue to the block
+device dispatch queue, we always give a preference to reads. However, we
+don't want to starve writes indefinitely either. So writes_starved controls
+how many times we give preference to reads over writes. When that has been
+done writes_starved number of times, we dispatch some writes based on the
+same criteria as reads.
+
+
+front_merges	(bool)
+------------
+
+Sometimes it happens that a request enters the io scheduler that is contiguous
+with a request that is already on the queue. Either it fits in the back of that
+request, or it fits at the front. That is called either a back merge candidate
+or a front merge candidate. Due to the way files are typically laid out,
+back merges are much more common than front merges. For some work loads, you
+may even know that it is a waste of time to spend any time attempting to
+front merge requests. Setting front_merges to 0 disables this functionality.
+Front merges may still occur due to the cached last_merge hint, but since
+that comes at basically 0 cost we leave that on. We simply disable the
+rbtree front sector lookup when the io scheduler merge function is called.
+
+
+Nov 11 2002, Jens Axboe <jens.axboe@oracle.com>
+
+
diff --git a/kernel/Documentation/block/ioprio.txt b/kernel/Documentation/block/ioprio.txt
new file mode 100644
index 000000000..8ed8c5938
--- /dev/null
+++ b/kernel/Documentation/block/ioprio.txt
@@ -0,0 +1,183 @@
+Block io priorities
+===================
+
+
+Intro
+-----
+
+With the introduction of cfq v3 (aka cfq-ts or time sliced cfq), basic io
+priorities are supported for reads on files.  This enables users to io nice
+processes or process groups, similar to what has been possible with cpu
+scheduling for ages.  This document mainly details the current possibilities
+with cfq; other io schedulers do not support io priorities thus far.
+
+Scheduling classes
+------------------
+
+CFQ implements three generic scheduling classes that determine how io is
+served for a process.
+
+IOPRIO_CLASS_RT: This is the realtime io class. This scheduling class is given
+higher priority than any other in the system, processes from this class are
+given first access to the disk every time. Thus it needs to be used with some
+care, one io RT process can starve the entire system. Within the RT class,
+there are 8 levels of class data that determine exactly how much time this
+process needs the disk for on each service. In the future this might change
+to be more directly mappable to performance, by passing in a wanted data
+rate instead.
+
+IOPRIO_CLASS_BE: This is the best-effort scheduling class, which is the default
+for any process that hasn't set a specific io priority. The class data
+determines how much io bandwidth the process will get, it's directly mappable
+to the cpu nice levels just more coarsely implemented. 0 is the highest
+BE prio level, 7 is the lowest. The mapping between cpu nice level and io
+nice level is determined as: io_nice = (cpu_nice + 20) / 5.
+
+IOPRIO_CLASS_IDLE: This is the idle scheduling class, processes running at this
+level only get io time when no one else needs the disk. The idle class has no
+class data, since it doesn't really apply here.
+
+Tools
+-----
+
+See below for a sample ionice tool. Usage:
+
+# ionice -c<class> -n<level> -p<pid>
+
+If pid isn't given, the current process is assumed. IO priority settings
+are inherited on fork, so you can use ionice to start the process at a given
+level:
+
+# ionice -c2 -n0 /bin/ls
+
+will run ls at the best-effort scheduling class at the highest priority.
+For a running process, you can give the pid instead:
+
+# ionice -c1 -n2 -p100
+
+will change pid 100 to run at the realtime scheduling class, at priority 2.
+
+---> snip ionice.c tool <---
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <getopt.h>
+#include <unistd.h>
+#include <sys/ptrace.h>
+#include <asm/unistd.h>
+
+extern int sys_ioprio_set(int, int, int);
+extern int sys_ioprio_get(int, int);
+
+#if defined(__i386__)
+#define __NR_ioprio_set		289
+#define __NR_ioprio_get		290
+#elif defined(__ppc__)
+#define __NR_ioprio_set		273
+#define __NR_ioprio_get		274
+#elif defined(__x86_64__)
+#define __NR_ioprio_set		251
+#define __NR_ioprio_get		252
+#elif defined(__ia64__)
+#define __NR_ioprio_set		1274
+#define __NR_ioprio_get		1275
+#else
+#error "Unsupported arch"
+#endif
+
+static inline int ioprio_set(int which, int who, int ioprio)
+{
+	return syscall(__NR_ioprio_set, which, who, ioprio);
+}
+
+static inline int ioprio_get(int which, int who)
+{
+	return syscall(__NR_ioprio_get, which, who);
+}
+
+enum {
+	IOPRIO_CLASS_NONE,
+	IOPRIO_CLASS_RT,
+	IOPRIO_CLASS_BE,
+	IOPRIO_CLASS_IDLE,
+};
+
+enum {
+	IOPRIO_WHO_PROCESS = 1,
+	IOPRIO_WHO_PGRP,
+	IOPRIO_WHO_USER,
+};
+
+#define IOPRIO_CLASS_SHIFT	13
+
+const char *to_prio[] = { "none", "realtime", "best-effort", "idle", };
+
+int main(int argc, char *argv[])
+{
+	int ioprio = 4, set = 0, ioprio_class = IOPRIO_CLASS_BE;
+	int c, pid = 0;
+
+	while ((c = getopt(argc, argv, "+n:c:p:")) != EOF) {
+		switch (c) {
+		case 'n':
+			ioprio = strtol(optarg, NULL, 10);
+			set = 1;
+			break;
+		case 'c':
+			ioprio_class = strtol(optarg, NULL, 10);
+			set = 1;
+			break;
+		case 'p':
+			pid = strtol(optarg, NULL, 10);
+			break;
+		}
+	}
+
+	switch (ioprio_class) {
+		case IOPRIO_CLASS_NONE:
+			ioprio_class = IOPRIO_CLASS_BE;
+			break;
+		case IOPRIO_CLASS_RT:
+		case IOPRIO_CLASS_BE:
+			break;
+		case IOPRIO_CLASS_IDLE:
+			ioprio = 7;
+			break;
+		default:
+			printf("bad prio class %d\n", ioprio_class);
+			return 1;
+	}
+
+	if (!set) {
+		if (!pid && argv[optind])
+			pid = strtol(argv[optind], NULL, 10);
+
+		ioprio = ioprio_get(IOPRIO_WHO_PROCESS, pid);
+
+		printf("pid=%d, %d\n", pid, ioprio);
+
+		if (ioprio == -1)
+			perror("ioprio_get");
+		else {
+			ioprio_class = ioprio >> IOPRIO_CLASS_SHIFT;
+			ioprio = ioprio & 0xff;
+			printf("%s: prio %d\n", to_prio[ioprio_class], ioprio);
+		}
+	} else {
+		if (ioprio_set(IOPRIO_WHO_PROCESS, pid, ioprio | ioprio_class << IOPRIO_CLASS_SHIFT) == -1) {
+			perror("ioprio_set");
+			return 1;
+		}
+
+		if (argv[optind])
+			execvp(argv[optind], &argv[optind]);
+	}
+
+	return 0;
+}
+
+---> snip ionice.c tool <---
+
+
+March 11 2005, Jens Axboe <jens.axboe@oracle.com>
diff --git a/kernel/Documentation/block/null_blk.txt b/kernel/Documentation/block/null_blk.txt
new file mode 100644
index 000000000..2f6c6ff71
--- /dev/null
+++ b/kernel/Documentation/block/null_blk.txt
@@ -0,0 +1,72 @@
+Null block device driver
+================================================================================
+
+I. Overview
+
+The null block device (/dev/nullb*) is used for benchmarking the various
+block-layer implementations. It emulates a block device of X gigabytes in size.
+The following instances are possible:
+
+  Single-queue block-layer
+    - Request-based.
+    - Single submission queue per device.
+    - Implements IO scheduling algorithms (CFQ, Deadline, noop).
+  Multi-queue block-layer
+    - Request-based.
+    - Configurable submission queues per device.
+  No block-layer (Known as bio-based)
+    - Bio-based. IO requests are submitted directly to the device driver.
+    - Directly accepts bio data structure and returns them.
+
+All of them have a completion queue for each core in the system.
+
+II. Module parameters applicable for all instances:
+
+queue_mode=[0-2]: Default: 2-Multi-queue
+  Selects which block-layer the module should instantiate with.
+
+  0: Bio-based.
+  1: Single-queue.
+  2: Multi-queue.
+
+home_node=[0--nr_nodes]: Default: NUMA_NO_NODE
+  Selects what CPU node the data structures are allocated from.
+
+gb=[Size in GB]: Default: 250GB
+  The size of the device reported to the system.
+
+bs=[Block size (in bytes)]: Default: 512 bytes
+  The block size reported to the system.
+
+nr_devices=[Number of devices]: Default: 2
+  Number of block devices instantiated. They are instantiated as /dev/nullb0,
+  etc.
+
+irqmode=[0-2]: Default: 1-Soft-irq
+  The completion mode used for completing IOs to the block-layer.
+
+  0: None.
+  1: Soft-irq. Uses IPI to complete IOs across CPU nodes. Simulates the overhead
+     when IOs are issued from another CPU node than the home the device is
+     connected to.
+  2: Timer: Waits a specific period (completion_nsec) for each IO before
+     completion.
+
+completion_nsec=[ns]: Default: 10.000ns
+  Combined with irqmode=2 (timer). The time each completion event must wait.
+
+submit_queues=[0..nr_cpus]:
+  The number of submission queues attached to the device driver. If unset, it
+  defaults to 1 on single-queue and bio-based instances. For multi-queue,
+  it is ignored when use_per_node_hctx module parameter is 1.
+
+hw_queue_depth=[0..qdepth]: Default: 64
+  The hardware queue depth of the device.
+
+III: Multi-queue specific parameters
+
+use_per_node_hctx=[0/1]: Default: 0
+  0: The number of submit queues are set to the value of the submit_queues
+     parameter.
+  1: The multi-queue block layer is instantiated with a hardware dispatch
+     queue for each CPU node in the system.
diff --git a/kernel/Documentation/block/queue-sysfs.txt b/kernel/Documentation/block/queue-sysfs.txt
new file mode 100644
index 000000000..3a29f8914
--- /dev/null
+++ b/kernel/Documentation/block/queue-sysfs.txt
@@ -0,0 +1,138 @@
+Queue sysfs files
+=================
+
+This text file will detail the queue files that are located in the sysfs tree
+for each block device. Note that stacked devices typically do not export
+any settings, since their queue merely functions are a remapping target.
+These files are the ones found in the /sys/block/xxx/queue/ directory.
+
+Files denoted with a RO postfix are readonly and the RW postfix means
+read-write.
+
+add_random (RW)
+----------------
+This file allows to turn off the disk entropy contribution. Default
+value of this file is '1'(on).
+
+discard_granularity (RO)
+-----------------------
+This shows the size of internal allocation of the device in bytes, if
+reported by the device. A value of '0' means device does not support
+the discard functionality.
+
+discard_max_bytes (RO)
+----------------------
+Devices that support discard functionality may have internal limits on
+the number of bytes that can be trimmed or unmapped in a single operation.
+The discard_max_bytes parameter is set by the device driver to the maximum
+number of bytes that can be discarded in a single operation. Discard
+requests issued to the device must not exceed this limit. A discard_max_bytes
+value of 0 means that the device does not support discard functionality.
+
+discard_zeroes_data (RO)
+------------------------
+When read, this file will show if the discarded block are zeroed by the
+device or not. If its value is '1' the blocks are zeroed otherwise not.
+
+hw_sector_size (RO)
+-------------------
+This is the hardware sector size of the device, in bytes.
+
+iostats (RW)
+-------------
+This file is used to control (on/off) the iostats accounting of the
+disk.
+
+logical_block_size (RO)
+-----------------------
+This is the logcal block size of the device, in bytes.
+
+max_hw_sectors_kb (RO)
+----------------------
+This is the maximum number of kilobytes supported in a single data transfer.
+
+max_integrity_segments (RO)
+---------------------------
+When read, this file shows the max limit of integrity segments as
+set by block layer which a hardware controller can handle.
+
+max_sectors_kb (RW)
+-------------------
+This is the maximum number of kilobytes that the block layer will allow
+for a filesystem request. Must be smaller than or equal to the maximum
+size allowed by the hardware.
+
+max_segments (RO)
+-----------------
+Maximum number of segments of the device.
+
+max_segment_size (RO)
+---------------------
+Maximum segment size of the device.
+
+minimum_io_size (RO)
+--------------------
+This is the smallest preferred IO size reported by the device.
+
+nomerges (RW)
+-------------
+This enables the user to disable the lookup logic involved with IO
+merging requests in the block layer. By default (0) all merges are
+enabled. When set to 1 only simple one-hit merges will be tried. When
+set to 2 no merge algorithms will be tried (including one-hit or more
+complex tree/hash lookups).
+
+nr_requests (RW)
+----------------
+This controls how many requests may be allocated in the block layer for
+read or write requests. Note that the total allocated number may be twice
+this amount, since it applies only to reads or writes (not the accumulated
+sum).
+
+To avoid priority inversion through request starvation, a request
+queue maintains a separate request pool per each cgroup when
+CONFIG_BLK_CGROUP is enabled, and this parameter applies to each such
+per-block-cgroup request pool.  IOW, if there are N block cgroups,
+each request queue may have up to N request pools, each independently
+regulated by nr_requests.
+
+optimal_io_size (RO)
+--------------------
+This is the optimal IO size reported by the device.
+
+physical_block_size (RO)
+------------------------
+This is the physical block size of device, in bytes.
+
+read_ahead_kb (RW)
+------------------
+Maximum number of kilobytes to read-ahead for filesystems on this block
+device.
+
+rotational (RW)
+---------------
+This file is used to stat if the device is of rotational type or
+non-rotational type.
+
+rq_affinity (RW)
+----------------
+If this option is '1', the block layer will migrate request completions to the
+cpu "group" that originally submitted the request. For some workloads this
+provides a significant reduction in CPU cycles due to caching effects.
+
+For storage configurations that need to maximize distribution of completion
+processing setting this option to '2' forces the completion to run on the
+requesting cpu (bypassing the "group" aggregation logic).
+
+scheduler (RW)
+--------------
+When read, this file will display the current and available IO schedulers
+for this block device. The currently active IO scheduler will be enclosed
+in [] brackets. Writing an IO scheduler name to this file will switch
+control of this block device to that new IO scheduler. Note that writing
+an IO scheduler name to this file will attempt to load that IO scheduler
+module, if it isn't already present in the system.
+
+
+
+Jens Axboe <jens.axboe@oracle.com>, February 2009
diff --git a/kernel/Documentation/block/request.txt b/kernel/Documentation/block/request.txt
new file mode 100644
index 000000000..754e104ed
--- /dev/null
+++ b/kernel/Documentation/block/request.txt
@@ -0,0 +1,88 @@
+
+struct request documentation
+
+Jens Axboe <jens.axboe@oracle.com> 27/05/02
+
+1.0
+Index
+
+2.0 Struct request members classification
+
+	2.1 struct request members explanation
+
+3.0
+
+
+2.0
+Short explanation of request members
+
+Classification flags:
+
+	D	driver member
+	B	block layer member
+	I	I/O scheduler member
+
+Unless an entry contains a D classification, a device driver must not access
+this member. Some members may contain D classifications, but should only be
+access through certain macros or functions (eg ->flags).
+
+<linux/blkdev.h>
+
+2.1
+Member				Flag	Comment
+------				----	-------
+
+struct list_head queuelist	BI	Organization on various internal
+					queues
+
+void *elevator_private		I	I/O scheduler private data
+
+unsigned char cmd[16]		D	Driver can use this for setting up
+					a cdb before execution, see
+					blk_queue_prep_rq
+
+unsigned long flags		DBI	Contains info about data direction,
+					request type, etc.
+
+int rq_status			D	Request status bits
+
+kdev_t rq_dev			DBI	Target device
+
+int errors			DB	Error counts
+
+sector_t sector			DBI	Target location
+
+unsigned long hard_nr_sectors	B	Used to keep sector sane
+
+unsigned long nr_sectors	DBI	Total number of sectors in request
+
+unsigned long hard_nr_sectors	B	Used to keep nr_sectors sane
+
+unsigned short nr_phys_segments	DB	Number of physical scatter gather
+					segments in a request
+
+unsigned short nr_hw_segments	DB	Number of hardware scatter gather
+					segments in a request
+
+unsigned int current_nr_sectors	DB	Number of sectors in first segment
+					of request
+
+unsigned int hard_cur_sectors	B	Used to keep current_nr_sectors sane
+
+int tag				DB	TCQ tag, if assigned
+
+void *special			D	Free to be used by driver
+
+char *buffer			D	Map of first segment, also see
+					section on bouncing SECTION
+
+struct completion *waiting	D	Can be used by driver to get signalled
+					on request completion
+
+struct bio *bio			DBI	First bio in request
+
+struct bio *biotail		DBI	Last bio in request
+
+struct request_queue *q		DB	Request queue this request belongs to
+
+struct request_list *rl		B	Request list this request came from
diff --git a/kernel/Documentation/block/stat.txt b/kernel/Documentation/block/stat.txt
new file mode 100644
index 000000000..0dbc946de
--- /dev/null
+++ b/kernel/Documentation/block/stat.txt
@@ -0,0 +1,82 @@
+Block layer statistics in /sys/block/<dev>/stat
+===============================================
+
+This file documents the contents of the /sys/block/<dev>/stat file.
+
+The stat file provides several statistics about the state of block
+device <dev>.
+
+Q. Why are there multiple statistics in a single file?  Doesn't sysfs
+   normally contain a single value per file?
+A. By having a single file, the kernel can guarantee that the statistics
+   represent a consistent snapshot of the state of the device.  If the
+   statistics were exported as multiple files containing one statistic
+   each, it would be impossible to guarantee that a set of readings
+   represent a single point in time.
+
+The stat file consists of a single line of text containing 11 decimal
+values separated by whitespace.  The fields are summarized in the
+following table, and described in more detail below.
+
+Name            units         description
+----            -----         -----------
+read I/Os       requests      number of read I/Os processed
+read merges     requests      number of read I/Os merged with in-queue I/O
+read sectors    sectors       number of sectors read
+read ticks      milliseconds  total wait time for read requests
+write I/Os      requests      number of write I/Os processed
+write merges    requests      number of write I/Os merged with in-queue I/O
+write sectors   sectors       number of sectors written
+write ticks     milliseconds  total wait time for write requests
+in_flight       requests      number of I/Os currently in flight
+io_ticks        milliseconds  total time this block device has been active
+time_in_queue   milliseconds  total wait time for all requests
+
+read I/Os, write I/Os
+=====================
+
+These values increment when an I/O request completes.
+
+read merges, write merges
+=========================
+
+These values increment when an I/O request is merged with an
+already-queued I/O request.
+
+read sectors, write sectors
+===========================
+
+These values count the number of sectors read from or written to this
+block device.  The "sectors" in question are the standard UNIX 512-byte
+sectors, not any device- or filesystem-specific block size.  The
+counters are incremented when the I/O completes.
+
+read ticks, write ticks
+=======================
+
+These values count the number of milliseconds that I/O requests have
+waited on this block device.  If there are multiple I/O requests waiting,
+these values will increase at a rate greater than 1000/second; for
+example, if 60 read requests wait for an average of 30 ms, the read_ticks
+field will increase by 60*30 = 1800.
+
+in_flight
+=========
+
+This value counts the number of I/O requests that have been issued to
+the device driver but have not yet completed.  It does not include I/O
+requests that are in the queue but not yet issued to the device driver.
+
+io_ticks
+========
+
+This value counts the number of milliseconds during which the device has
+had I/O requests queued.
+
+time_in_queue
+=============
+
+This value counts the number of milliseconds that I/O requests have waited
+on this block device.  If there are multiple I/O requests waiting, this
+value will increase as the product of the number of milliseconds times the
+number of requests waiting (see "read ticks" above for an example).
diff --git a/kernel/Documentation/block/switching-sched.txt b/kernel/Documentation/block/switching-sched.txt
new file mode 100644
index 000000000..3b2612e34
--- /dev/null
+++ b/kernel/Documentation/block/switching-sched.txt
@@ -0,0 +1,37 @@
+To choose IO schedulers at boot time, use the argument 'elevator=deadline'.
+'noop' and 'cfq' (the default) are also available. IO schedulers are assigned
+globally at boot time only presently.
+
+Each io queue has a set of io scheduler tunables associated with it. These
+tunables control how the io scheduler works. You can find these entries
+in:
+
+/sys/block/<device>/queue/iosched
+
+assuming that you have sysfs mounted on /sys. If you don't have sysfs mounted,
+you can do so by typing:
+
+# mount none /sys -t sysfs
+
+As of the Linux 2.6.10 kernel, it is now possible to change the
+IO scheduler for a given block device on the fly (thus making it possible,
+for instance, to set the CFQ scheduler for the system default, but
+set a specific device to use the deadline or noop schedulers - which
+can improve that device's throughput).
+
+To set a specific scheduler, simply do this:
+
+echo SCHEDNAME > /sys/block/DEV/queue/scheduler
+
+where SCHEDNAME is the name of a defined IO scheduler, and DEV is the
+device name (hda, hdb, sga, or whatever you happen to have).
+
+The list of defined schedulers can be found by simply doing
+a "cat /sys/block/DEV/queue/scheduler" - the list of valid names
+will be displayed, with the currently selected scheduler in brackets:
+
+# cat /sys/block/hda/queue/scheduler
+noop deadline [cfq]
+# echo deadline > /sys/block/hda/queue/scheduler
+# cat /sys/block/hda/queue/scheduler
+noop [deadline] cfq
diff --git a/kernel/Documentation/block/writeback_cache_control.txt b/kernel/Documentation/block/writeback_cache_control.txt
new file mode 100644
index 000000000..83407d366
--- /dev/null
+++ b/kernel/Documentation/block/writeback_cache_control.txt
@@ -0,0 +1,86 @@
+
+Explicit volatile write back cache control
+=====================================
+
+Introduction
+------------
+
+Many storage devices, especially in the consumer market, come with volatile
+write back caches.  That means the devices signal I/O completion to the
+operating system before data actually has hit the non-volatile storage.  This
+behavior obviously speeds up various workloads, but it means the operating
+system needs to force data out to the non-volatile storage when it performs
+a data integrity operation like fsync, sync or an unmount.
+
+The Linux block layer provides two simple mechanisms that let filesystems
+control the caching behavior of the storage device.  These mechanisms are
+a forced cache flush, and the Force Unit Access (FUA) flag for requests.
+
+
+Explicit cache flushes
+----------------------
+
+The REQ_FLUSH flag can be OR ed into the r/w flags of a bio submitted from
+the filesystem and will make sure the volatile cache of the storage device
+has been flushed before the actual I/O operation is started.  This explicitly
+guarantees that previously completed write requests are on non-volatile
+storage before the flagged bio starts. In addition the REQ_FLUSH flag can be
+set on an otherwise empty bio structure, which causes only an explicit cache
+flush without any dependent I/O.  It is recommend to use
+the blkdev_issue_flush() helper for a pure cache flush.
+
+
+Forced Unit Access
+-----------------
+
+The REQ_FUA flag can be OR ed into the r/w flags of a bio submitted from the
+filesystem and will make sure that I/O completion for this request is only
+signaled after the data has been committed to non-volatile storage.
+
+
+Implementation details for filesystems
+--------------------------------------
+
+Filesystems can simply set the REQ_FLUSH and REQ_FUA bits and do not have to
+worry if the underlying devices need any explicit cache flushing and how
+the Forced Unit Access is implemented.  The REQ_FLUSH and REQ_FUA flags
+may both be set on a single bio.
+
+
+Implementation details for make_request_fn based block drivers
+--------------------------------------------------------------
+
+These drivers will always see the REQ_FLUSH and REQ_FUA bits as they sit
+directly below the submit_bio interface.  For remapping drivers the REQ_FUA
+bits need to be propagated to underlying devices, and a global flush needs
+to be implemented for bios with the REQ_FLUSH bit set.  For real device
+drivers that do not have a volatile cache the REQ_FLUSH and REQ_FUA bits
+on non-empty bios can simply be ignored, and REQ_FLUSH requests without
+data can be completed successfully without doing any work.  Drivers for
+devices with volatile caches need to implement the support for these
+flags themselves without any help from the block layer.
+
+
+Implementation details for request_fn based block drivers
+--------------------------------------------------------------
+
+For devices that do not support volatile write caches there is no driver
+support required, the block layer completes empty REQ_FLUSH requests before
+entering the driver and strips off the REQ_FLUSH and REQ_FUA bits from
+requests that have a payload.  For devices with volatile write caches the
+driver needs to tell the block layer that it supports flushing caches by
+doing:
+
+	blk_queue_flush(sdkp->disk->queue, REQ_FLUSH);
+
+and handle empty REQ_FLUSH requests in its prep_fn/request_fn.  Note that
+REQ_FLUSH requests with a payload are automatically turned into a sequence
+of an empty REQ_FLUSH request followed by the actual write by the block
+layer.  For devices that also support the FUA bit the block layer needs
+to be told to pass through the REQ_FUA bit using:
+
+	blk_queue_flush(sdkp->disk->queue, REQ_FLUSH | REQ_FUA);
+
+and the driver must handle write requests that have the REQ_FUA bit set
+in prep_fn/request_fn.  If the FUA bit is not natively supported the block
+layer turns it into an empty REQ_FLUSH request after the actual write.