These changes are the raw update to linux-4.4.6-rt14. Kernel sources

are taken from kernel.org, and rt patch from the rt wiki download page.

During the rebasing, the following patch collided:

Force tick interrupt and get rid of softirq magic(I70131fb85).

Collisions have been removed because its logic was found on the
source already.

Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769
Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com>

1 files changed, 0 insertions, 105 deletions

diff --git a/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-konepure b/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-konepure
deleted file mode 100644
index 41a9b7fbf..000000000
--- a/kernel/Documentation/ABI/testing/sysfs-driver-hid-roccat-konepure
+++ /dev/null
@@ -1,105 +0,0 @@
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/actual_profile
-Date:		December 2012
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The mouse can store 5 profiles which can be switched by the
-		press of a button. actual_profile holds number of actual profile.
-		This value is persistent, so its value determines the profile
-		that's active when the mouse is powered on next time.
-		When written, the mouse activates the set profile immediately.
-		The data has to be 3 bytes long.
-		The mouse will reject invalid data.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/control
-Date:		December 2012
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	When written, this file lets one select which data from which
-		profile will be	read next. The data has to be 3 bytes long.
-		This file is writeonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/info
-Date:		December 2012
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	When read, this file returns general data like firmware version.
-		When written, the device can be reset.
-		The data is 6 bytes long.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/macro
-Date:		December 2012
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The mouse can store a macro with max 500 key/button strokes
-		internally.
-		When written, this file lets one set the sequence for a specific
-		button for a specific profile. Button and profile numbers are
-		included in written data. The data has to be 2082 bytes long.
-		This file is writeonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/profile_buttons
-Date:		December 2012
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The mouse can store 5 profiles which can be switched by the
-		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds information about button layout.
-		When written, this file lets one write the respective profile
-		buttons back to the mouse. The data has to be 59 bytes long.
-		The mouse will reject invalid data.
-		Which profile to write is determined by the profile number
-		contained in the data.
-		Before reading this file, control has to be written to select
-		which profile to read.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/profile_settings
-Date:		December 2012
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The mouse can store 5 profiles which can be switched by the
-		press of a button. A profile is split in settings and buttons.
-		profile_settings holds information like resolution, sensitivity
-		and light effects.
-		When written, this file lets one write the respective profile
-		settings back to the mouse. The data has to be 31 bytes long.
-		The mouse will reject invalid data.
-		Which profile to write is determined by the profile number
-		contained in the data.
-		Before reading this file, control has to be written to select
-		which profile to read.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/sensor
-Date:		December 2012
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The mouse has a tracking- and a distance-control-unit. These
-		can be activated/deactivated and the lift-off distance can be
-		set. The data has to be 6 bytes long.
-		This file is writeonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/talk
-Date:		December 2012
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	Used to active some easy* functions of the mouse from outside.
-		The data has to be 16 bytes long.
-		This file is writeonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/tcu
-Date:		December 2012
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	When written a calibration process for the tracking control unit
-		can be initiated/cancelled. Also lets one read/write sensor
-		registers.
-		The data has to be 4 bytes long.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/konepure/roccatkonepure<minor>/tcu_image
-Date:		December 2012
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	When read the mouse returns a 30x30 pixel image of the
-		sampled underground. This works only in the course of a
-		calibration process initiated with tcu.
-		The returned data is 1028 bytes in size.
-		This file is readonly.
-Users:		http://roccat.sourceforge.net