Add the rt linux 4.1.3-rt3 as base

Import the rt linux 4.1.3-rt3 as OPNFV kvm base.

It's from git://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git linux-4.1.y-rt and
the base is:

commit 0917f823c59692d751951bf5ea699a2d1e2f26a2
Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date:   Sat Jul 25 12:13:34 2015 +0200

    Prepare v4.1.3-rt3

    Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>

We lose all the git history this way and it's not good. We
should apply another opnfv project repo in future.

Change-Id: I87543d81c9df70d99c5001fbdf646b202c19f423
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>

1 files changed, 296 insertions, 0 deletions

diff --git a/kernel/Documentation/ABI/testing/sysfs-bus-pci b/kernel/Documentation/ABI/testing/sysfs-bus-pci
new file mode 100644
index 000000000..b3bc50f65
--- /dev/null
+++ b/kernel/Documentation/ABI/testing/sysfs-bus-pci
@@ -0,0 +1,296 @@
+What:		/sys/bus/pci/drivers/.../bind
+Date:		December 2003
+Contact:	linux-pci@vger.kernel.org
+Description:
+		Writing a device location to this file will cause
+		the driver to attempt to bind to the device found at
+		this location.	This is useful for overriding default
+		bindings.  The format for the location is: DDDD:BB:DD.F.
+		That is Domain:Bus:Device.Function and is the same as
+		found in /sys/bus/pci/devices/.  For example:
+		# echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind
+		(Note: kernels before 2.6.28 may require echo -n).
+
+What:		/sys/bus/pci/drivers/.../unbind
+Date:		December 2003
+Contact:	linux-pci@vger.kernel.org
+Description:
+		Writing a device location to this file will cause the
+		driver to attempt to unbind from the device found at
+		this location.	This may be useful when overriding default
+		bindings.  The format for the location is: DDDD:BB:DD.F.
+		That is Domain:Bus:Device.Function and is the same as
+		found in /sys/bus/pci/devices/. For example:
+		# echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind
+		(Note: kernels before 2.6.28 may require echo -n).
+
+What:		/sys/bus/pci/drivers/.../new_id
+Date:		December 2003
+Contact:	linux-pci@vger.kernel.org
+Description:
+		Writing a device ID to this file will attempt to
+		dynamically add a new device ID to a PCI device driver.
+		This may allow the driver to support more hardware than
+		was included in the driver's static device ID support
+		table at compile time.  The format for the device ID is:
+		VVVV DDDD SVVV SDDD CCCC MMMM PPPP.  That is Vendor ID,
+		Device ID, Subsystem Vendor ID, Subsystem Device ID,
+		Class, Class Mask, and Private Driver Data.  The Vendor ID
+		and Device ID fields are required, the rest are optional.
+		Upon successfully adding an ID, the driver will probe
+		for the device and attempt to bind to it.  For example:
+		# echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id
+
+What:		/sys/bus/pci/drivers/.../remove_id
+Date:		February 2009
+Contact:	Chris Wright <chrisw@sous-sol.org>
+Description:
+		Writing a device ID to this file will remove an ID
+		that was dynamically added via the new_id sysfs entry.
+		The format for the device ID is:
+		VVVV DDDD SVVV SDDD CCCC MMMM.	That is Vendor ID, Device
+		ID, Subsystem Vendor ID, Subsystem Device ID, Class,
+		and Class Mask.  The Vendor ID and Device ID fields are
+		required, the rest are optional.  After successfully
+		removing an ID, the driver will no longer support the
+		device.  This is useful to ensure auto probing won't
+		match the driver to the device.  For example:
+		# echo "8086 10f5" > /sys/bus/pci/drivers/foo/remove_id
+
+What:		/sys/bus/pci/rescan
+Date:		January 2009
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a non-zero value to this attribute will
+		force a rescan of all PCI buses in the system, and
+		re-discover previously removed devices.
+
+What:		/sys/bus/pci/devices/.../msi_bus
+Date:		September 2014
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a zero value to this attribute disallows MSI and
+		MSI-X for any future drivers of the device.  If the device
+		is a bridge, MSI and MSI-X will be disallowed for future
+		drivers of all child devices under the bridge.  Drivers
+		must be reloaded for the new setting to take effect.
+
+What:		/sys/bus/pci/devices/.../msi_irqs/
+Date:		September, 2011
+Contact:	Neil Horman <nhorman@tuxdriver.com>
+Description:
+		The /sys/devices/.../msi_irqs directory contains a variable set
+		of files, with each file being named after a corresponding msi
+		irq vector allocated to that device.
+
+What:		/sys/bus/pci/devices/.../msi_irqs/<N>
+Date:		September 2011
+Contact:	Neil Horman <nhorman@tuxdriver.com>
+Description:
+		This attribute indicates the mode that the irq vector named by
+		the file is in (msi vs. msix)
+
+What:		/sys/bus/pci/devices/.../remove
+Date:		January 2009
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a non-zero value to this attribute will
+		hot-remove the PCI device and any of its children.
+
+What:		/sys/bus/pci/devices/.../pci_bus/.../rescan
+Date:		May 2011
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a non-zero value to this attribute will
+		force a rescan of the bus and all child buses,
+		and re-discover devices removed earlier from this
+		part of the device tree.
+
+What:		/sys/bus/pci/devices/.../rescan
+Date:		January 2009
+Contact:	Linux PCI developers <linux-pci@vger.kernel.org>
+Description:
+		Writing a non-zero value to this attribute will
+		force a rescan of the device's parent bus and all
+		child buses, and re-discover devices removed earlier
+		from this part of the device tree.
+
+What:		/sys/bus/pci/devices/.../reset
+Date:		July 2009
+Contact:	Michael S. Tsirkin <mst@redhat.com>
+Description:
+		Some devices allow an individual function to be reset
+		without affecting other functions in the same device.
+		For devices that have this support, a file named reset
+		will be present in sysfs.  Writing 1 to this file
+		will perform reset.
+
+What:		/sys/bus/pci/devices/.../vpd
+Date:		February 2008
+Contact:	Ben Hutchings <bwh@kernel.org>
+Description:
+		A file named vpd in a device directory will be a
+		binary file containing the Vital Product Data for the
+		device.  It should follow the VPD format defined in
+		PCI Specification 2.1 or 2.2, but users should consider
+		that some devices may have malformatted data.  If the
+		underlying VPD has a writable section then the
+		corresponding section of this file will be writable.
+
+What:		/sys/bus/pci/devices/.../virtfnN
+Date:		March 2009
+Contact:	Yu Zhao <yu.zhao@intel.com>
+Description:
+		This symbolic link appears when hardware supports the SR-IOV
+		capability and the Physical Function driver has enabled it.
+		The symbolic link points to the PCI device sysfs entry of the
+		Virtual Function whose index is N (0...MaxVFs-1).
+
+What:		/sys/bus/pci/devices/.../dep_link
+Date:		March 2009
+Contact:	Yu Zhao <yu.zhao@intel.com>
+Description:
+		This symbolic link appears when hardware supports the SR-IOV
+		capability and the Physical Function driver has enabled it,
+		and this device has vendor specific dependencies with others.
+		The symbolic link points to the PCI device sysfs entry of
+		Physical Function this device depends on.
+
+What:		/sys/bus/pci/devices/.../physfn
+Date:		March 2009
+Contact:	Yu Zhao <yu.zhao@intel.com>
+Description:
+		This symbolic link appears when a device is a Virtual Function.
+		The symbolic link points to the PCI device sysfs entry of the
+		Physical Function this device associates with.
+
+What:		/sys/bus/pci/slots/.../module
+Date:		June 2009
+Contact:	linux-pci@vger.kernel.org
+Description:
+		This symbolic link points to the PCI hotplug controller driver
+		module that manages the hotplug slot.
+
+What:		/sys/bus/pci/devices/.../label
+Date:		July 2010
+Contact:	Narendra K <narendra_k@dell.com>, linux-bugs@dell.com
+Description:
+		Reading this attribute will provide the firmware
+		given name (SMBIOS type 41 string or ACPI _DSM string) of
+		the PCI device.	The attribute will be created only
+		if the firmware	has given a name to the PCI device.
+		ACPI _DSM string name will be given priority if the
+		system firmware provides SMBIOS type 41 string also.
+Users:
+		Userspace applications interested in knowing the
+		firmware assigned name of the PCI device.
+
+What:		/sys/bus/pci/devices/.../index
+Date:		July 2010
+Contact:	Narendra K <narendra_k@dell.com>, linux-bugs@dell.com
+Description:
+		Reading this attribute will provide the firmware
+		given instance (SMBIOS type 41 device type instance) of the
+		PCI device. The attribute will be created only if the firmware
+		has given an instance number to the PCI device.
+Users:
+		Userspace applications interested in knowing the
+		firmware assigned device type instance of the PCI
+		device that can help in understanding the firmware
+		intended order of the PCI device.
+
+What:		/sys/bus/pci/devices/.../acpi_index
+Date:		July 2010
+Contact:	Narendra K <narendra_k@dell.com>, linux-bugs@dell.com
+Description:
+		Reading this attribute will provide the firmware
+		given instance (ACPI _DSM instance number) of the PCI device.
+		The attribute will be created only if the firmware has given
+		an instance number to the PCI device. ACPI _DSM instance number
+		will be given priority if the system firmware provides SMBIOS
+		type 41 device type instance also.
+Users:
+		Userspace applications interested in knowing the
+		firmware assigned instance number of the PCI
+		device that can help in understanding the firmware
+		intended order of the PCI device.
+
+What:		/sys/bus/pci/devices/.../d3cold_allowed
+Date:		July 2012
+Contact:	Huang Ying <ying.huang@intel.com>
+Description:
+		d3cold_allowed is bit to control whether the corresponding PCI
+		device can be put into D3Cold state.  If it is cleared, the
+		device will never be put into D3Cold state.  If it is set, the
+		device may be put into D3Cold state if other requirements are
+		satisfied too.  Reading this attribute will show the current
+		value of d3cold_allowed bit.  Writing this attribute will set
+		the value of d3cold_allowed bit.
+
+What:		/sys/bus/pci/devices/.../sriov_totalvfs
+Date:		November 2012
+Contact:	Donald Dutile <ddutile@redhat.com>
+Description:
+		This file appears when a physical PCIe device supports SR-IOV.
+		Userspace applications can read this file to determine the
+		maximum number of Virtual Functions (VFs) a PCIe physical
+		function (PF) can support. Typically, this is the value reported
+		in the PF's SR-IOV extended capability structure's TotalVFs
+		element.  Drivers have the ability at probe time to reduce the
+		value read from this file via the pci_sriov_set_totalvfs()
+		function.
+
+What:		/sys/bus/pci/devices/.../sriov_numvfs
+Date:		November 2012
+Contact:	Donald Dutile <ddutile@redhat.com>
+Description:
+		This file appears when a physical PCIe device supports SR-IOV.
+		Userspace applications can read and write to this file to
+		determine and control the enablement or disablement of Virtual
+		Functions (VFs) on the physical function (PF). A read of this
+		file will return the number of VFs that are enabled on this PF.
+		A number written to this file will enable the specified
+		number of VFs. A userspace application would typically read the
+		file and check that the value is zero, and then write the number
+		of VFs that should be enabled on the PF; the value written
+		should be less than or equal to the value in the sriov_totalvfs
+		file. A userspace application wanting to disable the VFs would
+		write a zero to this file. The core ensures that valid values
+		are written to this file, and returns errors when values are not
+		valid.  For example, writing a 2 to this file when sriov_numvfs
+		is not 0 and not 2 already will return an error. Writing a 10
+		when the value of sriov_totalvfs is 8 will return an error.
+
+What:		/sys/bus/pci/devices/.../driver_override
+Date:		April 2014
+Contact:	Alex Williamson <alex.williamson@redhat.com>
+Description:
+		This file allows the driver for a device to be specified which
+		will override standard static and dynamic ID matching.  When
+		specified, only a driver with a name matching the value written
+		to driver_override will have an opportunity to bind to the
+		device.  The override is specified by writing a string to the
+		driver_override file (echo pci-stub > driver_override) and
+		may be cleared with an empty string (echo > driver_override).
+		This returns the device to standard matching rules binding.
+		Writing to driver_override does not automatically unbind the
+		device from its current driver or make any attempt to
+		automatically load the specified driver.  If no driver with a
+		matching name is currently loaded in the kernel, the device
+		will not bind to any driver.  This also allows devices to
+		opt-out of driver binding using a driver_override name such as
+		"none".  Only a single driver may be specified in the override,
+		there is no support for parsing delimiters.
+
+What:		/sys/bus/pci/devices/.../numa_node
+Date:		Oct 2014
+Contact:	Prarit Bhargava <prarit@redhat.com>
+Description:
+		This file contains the NUMA node to which the PCI device is
+		attached, or -1 if the node is unknown.  The initial value
+		comes from an ACPI _PXM method or a similar firmware
+		source.  If that is missing or incorrect, this file can be
+		written to override the node.  In that case, please report
+		a firmware bug to the system vendor.  Writing to this file
+		taints the kernel with TAINT_FIRMWARE_WORKAROUND, which
+		reduces the supportability of your system.