diff options
author | 2016-01-14 14:26:21 -0800 | |
---|---|---|
committer | 2016-01-19 09:54:52 -0800 | |
commit | 077953c1ac437066a82e0932e889ebd252ecd256 (patch) | |
tree | 12dd865cbdd243682901e033e0d53a404f8b744f /docs | |
parent | 00bbfcd8f77b0379efa999a290b0edd1de7ed07d (diff) |
Add the documentation for kvm4nfv project
Adding documentation to kvm4nfv project based on
https://wiki.opnfv.org/documentation/tools and the contents mostly comes
from https://wiki.opnfv.org/nfv-kvm,
https://wiki.opnfv.org/nfv-kvm-tuning and
https://wiki.opnfv.org/nfv-kvm-test.
Change-Id: If321221724ec9b76db065af7cdab97ce981be740
Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com>
Diffstat (limited to 'docs')
-rw-r--r-- | docs/all/environment-setup.rst | 147 | ||||
-rw-r--r-- | docs/all/index.rst | 44 | ||||
-rw-r--r-- | docs/all/tunning.rst | 97 | ||||
-rw-r--r-- | docs/etc/conf.py | 34 | ||||
-rw-r--r-- | docs/how-to-use-docs/documentation-example.rst | 86 | ||||
-rw-r--r-- | docs/how-to-use-docs/index.rst | 30 |
6 files changed, 288 insertions, 150 deletions
diff --git a/docs/all/environment-setup.rst b/docs/all/environment-setup.rst new file mode 100644 index 000000000..8448e9650 --- /dev/null +++ b/docs/all/environment-setup.rst @@ -0,0 +1,147 @@ +Low Latency Environment +======================= + +Achieving low latency with the KVM4NFV project requires setting up a special +test environment. This environment includes the BIOS settings, kernel +configuration, kernel parameters and the run-time environment. + +Hardware Environment Description +-------------------------------- + +BIOS setup plays an important role in achieving real-time latency. A collection +of relevant settings, used on the platform where the baseline performance data +was collected, is detailed below: + +CPU Features +~~~~~~~~~~~~ + +Some special CPU features like TSC-deadline timer, invariant TSC and Process posted +interrupts etc are helpful for latency reduction. + +Below is the CPU information on the baseline test platform. +:: + processor : 35 + vendor_id : GenuineIntel + cpu family : 6 + model : 63 + model name : Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz + stepping : 2 + microcode : 0x2d + cpu MHz : 2294.795 + cache size : 46080 KB + physical id : 1 + siblings : 18 + core id : 27 + cpu cores : 18 + apicid : 118 + initial apicid : 118 + fpu : yes + fpu_exception : yes + cpuid level : 15 + wp : yes + flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge + mca cmov pat pse36 clflush dts acpi mmx fxsr sse + sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm + constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc + aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 + ssse3 fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt + tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm arat epb + pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase + tsc_adjust bmi1 avx2 smep bmi2 erms invpcid cqm xsaveopt cqm_llc + cqm_occup_llcbugs + bogomips : 4595.54 + clflush size : 64 + cache_alignment : 64 + address sizes : 46 bits physical, 48 bits virtual + power management: + +CPU Topology +~~~~~~~~~~~~ + +NUMA topology is also important for latency reducation. + +Below is the CPU topology on the baseline test platform. +:: + [nfv@otcnfv02 ~]$ lscpu + Architecture: x86_64 + CPU op-mode(s): 32-bit, 64-bit + Byte Order: Little Endian + CPU(s): 36 + On-line CPU(s) list: 0-35 + Thread(s) per core: 1 + Core(s) per socket: 18 + Socket(s): 2 + NUMA node(s): 2 + Vendor ID: GenuineIntel + CPU family: 6 + Model: 63 + Model name: Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz + Stepping: 2 + CPU MHz: 2294.795 + BogoMIPS: 4595.54 + Virtualization: VT-x + L1d cache: 32K + L1i cache: 32K + L2 cache: 256K + L3 cache: 46080K + NUMA node0 CPU(s): 0-17 + NUMA node1 CPU(s): 18-35 + +BIOS Setup +~~~~~~~~~~ + +Careful BIOS setup is important in achieving real time latency. Different +platforms have different BIOS setups, below are the important BIOS settings on +the platform used to collect the baseline performance data. +:: + CPU Power and Performance <Performance> + CPU C-State <Disabled> + C1E Autopromote <Disabled> + Processor C3 <Disabled> + Processor C6 <Disabled> + Select Memory RAS <Maximum Performance> + NUMA Optimized <Enabled> + Cluster-on-Die <Disabled> + Patrol Scrub <Disabled> + Demand Scrub <Disabled> + Correctable Error <10> + Intel(R) Hyper-Threading <Disabled> + Active Processor Cores <All> + Execute Disable Bit <Enabled> + Intel(R) Virtualization Technology <Enabled> + Intel(R) TXT <Disabled> + Enhanced Error Containment Mode <Disabled> + USB Controller <Enabled> + USB 3.0 Controller <Auto> + Legacy USB Support <Disabled> + Port 60/64 Emulation <Disabled> + +Software Environment Setup +-------------------------- +Both the host and the guest environment need to be configured properly to +reduce latency variations. Below are some suggested kernel configurations. +The ci/envs/ directory gives etailed implementation on how to setup the +environment. + +Kernel Parameter +~~~~~~~~~~~~~~~~ + +Please check the default kernel configuration in the source code at: +kernel/arch/x86/configs/opnfv.config. + +Below is host kernel boot line example: +:: + isolcpus=11-15,31-35 nohz_full=11-15,31-35 rcu_nocbs=11-15,31-35 iommu=pt intel_iommu=on default_hugepagesz=1G hugepagesz=1G mce=off idle=poll intel_pstate=disable processor.max_cstate=1 pcie_asmp=off tsc=reliable + +Below is guest kernel boot line example +:: + isolcpus=1 nohz_full=1 rcu_nocbs=1 mce=off idle=poll default_hugepagesz=1G hugepagesz=1G + +Please refer to :doc:`tunning` for more explanation. + +Run-time Environment Setup +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Not only are special kernel parameters needed but a special run-time +environment is also required. Please refer to :doc:`tunning` for more +explanation. diff --git a/docs/all/index.rst b/docs/all/index.rst new file mode 100644 index 000000000..fed745ee6 --- /dev/null +++ b/docs/all/index.rst @@ -0,0 +1,44 @@ +=============== +KVM4NFV project +=============== + +Welcome to KVM4NFV_ project! + + + +.. _KVM4NFV: https://wiki.opnfv.org/nfv-kvm + +Contents: + +KVM4NFV Project Description +=========================== + +The NFV hypervisors provide crucial functionality in the NFV Infrastructure +(NFVI). The existing hypervisors, however, are not necessarily designed or +targeted to meet the requirements for the NFVI, and we need to make +collaborative efforts toward enabling the NFV features. + +The KVM4NFV project focuses on the KVM hypervisor to enhance it for NFV, by +looking at the following areas + ++ Minimal Interrupt latency variation for data plane VNFs + * Minimal Timing Variation for Timing correctness of real-time VNFs + * Minimal packet latency variation for data-plane VNFs ++ Fast live migration + +hile these items require software development and/or specific hardware features +there are also some adjustments that need to be made to system configuration +information, like hardware, BIOS, OS, etc. + +.. toctree:: + :numbered: + :maxdepth: 1 + +Setup Guides +============ +.. toctree:: + :maxdepth: 2 + + environment-setup + tunning + diff --git a/docs/all/tunning.rst b/docs/all/tunning.rst new file mode 100644 index 000000000..075bf0488 --- /dev/null +++ b/docs/all/tunning.rst @@ -0,0 +1,97 @@ +Low Latency Tunning Suggestion +============================== + +The correct configuration is critical for improving the NFV performance/latency. +Even working on the same codebase, configurations can cause wildly different +performance/latency results. + +There are many combinations of configurations, from hardware configuration to +Operating System configuration and application level configuration. And there +is no one simple configuration that works for every case. To tune a specific +scenario, it's important to know the behaviors of different configurations and +their impact. + +Platform Configuration +---------------------- + +Some hardware features can be configured through firmware interface(like BIOS) +but others may not be configurable (e.g. SMI on most platforms). + +* **Power management:** + Most power management related features save power at the + expensive of latency. These features include: IntelĀ®Turbo Boost Technology, + Enhanced IntelĀ®SpeedStep, Processor C state and P state. Normally they should + be disabled but, depending on the real-time application design and latency + requirements, there might be some features can be enabled if the impact on + deterministic execution of the workload is small. + +* **Hyper-Threading:** + The logic cores that share resource with other logic cores can introduce + latency so the recommendation is to disable this feature for realtime use + cases. + +* **Legacy USB Support/Port 60/64 Emulation:** + These features involve some emulation in firmware and can introduce random + latency. It is recommended that they are disabled. + +* **SMI (System Management Interrupt):** + SMI runs outside of the kernel code and can potentially cause + latency. It is a pity there is no simple way to disable it. Some vendors may + provide related switches in BIOS but most machines do not have this capability. + +Operating System Configuration +------------------------------ + +* **CPU isolation:** + To achieve deterministic latency, dedicated CPUs should be allocated for + realtime application. This can be achieved by isolating cpus from kernel + scheduler. Please refer to + http://lxr.free-electrons.com/source/Documentation/kernel-parameters.txt#L1608 + for more information. + +* **Memory allocation:** + Memory shoud be reserved for realtime applications and usually hugepage should + be used to reduce page fauts/TLB misses. + +* **IRQ affinity:** + All the non-realtime IRQs should be affinitized to non realtime CPUs to + reduce the impact on realtime CPUs. Some OS distributions contain an irqbalance + deamon which balances the IRQs among all the cores dynamically. It should be + disabled as well. + +* **Device assignment for VM:** + If a device is used in a VM, then device passthrough is desirable. In this case, + the IOMMU should be enabled. + +* **Tickless:** + Frequent clock ticks cause latency. CONFIG_NOHZ_FULL should be enabled in the + linux kernel. With CONFIG_NOHZ_FULL, the physical CPU will trigger many fewer + clock tick interrupts(currently, 1 tick per second). This can reduce latency + because each host timer interrupt triggers a VM exit from guest to host which + causes performance/latency impacts. + +* **TSC:** + Mark TSC clock source as reliable. A TSC clock source that seems to be + unreliable causes the kernel to continuously enable the clock source watchdog + to check if TSC frequency is still correct. On recent Intel platforms with + Constant TSC/Invariant TSC/Synchronized TSC, the TSC is reliable so the + watchdog is useless but cause latency. + +* **Idle:** + The poll option forces a polling idle loop that can slightly improve the + performance of waking up an idle CPU. + +* **RCU_NOCB:** + RCU is a kernel synchronization mechanism. Refer to + http://lxr.free-electrons.com/source/Documentation/RCU/whatisRCU.txt for more + information. With RCU_NOCB, the impact from RCU to the VNF will be reduced. + +* **Disable the RT throttling:** + RT Throttling is a Linux kernel mechanism that + occurs when a process or thread uses 100% of the core, leaving no resources for + the Linux scheduler to execute the kernel/housekeeping tasks. RT Throttling + increases the latency so should be disabled. + +* **NUMA configuration:** + To achieve the best latency. CPU/Memory and device allocated for realtime + application/VM should be in the same NUMA node. diff --git a/docs/etc/conf.py b/docs/etc/conf.py deleted file mode 100644 index 006603516..000000000 --- a/docs/etc/conf.py +++ /dev/null @@ -1,34 +0,0 @@ -import datetime -import sys -import os - -try: - __import__('imp').find_module('sphinx.ext.numfig') - extensions = ['sphinx.ext.numfig'] -except ImportError: - # 'pip install sphinx_numfig' - extensions = ['sphinx_numfig'] - -# numfig: -number_figures = True -figure_caption_prefix = "Fig." - -source_suffix = '.rst' -master_doc = 'index' -pygments_style = 'sphinx' -html_use_index = False - -pdf_documents = [('index', u'OPNFV', u'OPNFV Project', u'OPNFV')] -pdf_fit_mode = "shrink" -pdf_stylesheets = ['sphinx','kerning','a4'] -#latex_domain_indices = False -#latex_use_modindex = False - -latex_elements = { - 'printindex': '', -} - -project = u'OPNFV: Template documentation config' -copyright = u'%s, OPNFV' % datetime.date.today().year -version = u'1.0.0' -release = u'1.0.0' diff --git a/docs/how-to-use-docs/documentation-example.rst b/docs/how-to-use-docs/documentation-example.rst deleted file mode 100644 index afcf75814..000000000 --- a/docs/how-to-use-docs/documentation-example.rst +++ /dev/null @@ -1,86 +0,0 @@ -.. two dots create a comment. please leave this logo at the top of each of your rst files. -.. image:: ../etc/opnfv-logo.png - :height: 40 - :width: 200 - :alt: OPNFV - :align: left -.. these two pipes are to seperate the logo from the first title -| -| -How to create documentation for your OPNFV project -================================================== - -this is the directory structure of the docs/ directory that can be found in the root of your project directory - -.. code-block:: bash - - ./etc - ./etc/opnfv-logo.png - ./etc/conf.py - ./how-to-use-docs - ./how-to-use-docs/documentation-example.rst - ./how-to-use-docs/index.rst - -To create your own documentation, Create any number of directories (depending on your need) and place in each of them an index.rst. -This index file must refence your other rst files. - -* Here is an example index.rst - -.. code-block:: bash - - Example Documentation table of contents - ======================================= - - Contents: - - .. toctree:: - :numbered: - :maxdepth: 4 - - documentation-example.rst - - Indices and tables - ================== - - * :ref:`search` - - Revision: _sha1_ - - Build date: |today| - - -The Sphinx Build -================ - -When you push documentation changes to gerrit a jenkins job will create html documentation. - -* Verify Jobs -For verify jobs a link to the documentation will show up as a comment in gerrit for you to see the result. - -* Merge jobs - -Once you are happy with the look of your documentation you can submit the patchset the merge job will -copy the output of each documentation directory to http://artifacts.opnfv.org/$project/docs/$name_of_your_folder/index.html - -Here are some quick examples of how to use rst markup - -This is a headline:: - - here is some code, note that it is indented - -links are easy to add: Here is a link to sphinx, the tool that we are using to generate documetation http://sphinx-doc.org/ - -* Bulleted Items - - **this will be bold** - -.. code-block:: bash - - echo "Heres is a code block with bash syntax highlighting" - - -Leave these at the bottom of each of your documents they are used internally - -Revision: _sha1_ - -Build date: |today| diff --git a/docs/how-to-use-docs/index.rst b/docs/how-to-use-docs/index.rst deleted file mode 100644 index 36710b32d..000000000 --- a/docs/how-to-use-docs/index.rst +++ /dev/null @@ -1,30 +0,0 @@ -.. OPNFV Release Engineering documentation, created by - sphinx-quickstart on Tue Jun 9 19:12:31 2015. - You can adapt this file completely to your liking, but it should at least - contain the root `toctree` directive. - -.. image:: ../etc/opnfv-logo.png - :height: 40 - :width: 200 - :alt: OPNFV - :align: left - -Example Documentation table of contents -======================================= - -Contents: - -.. toctree:: - :numbered: - :maxdepth: 4 - - documentation-example.rst - -Indices and tables -================== - -* :ref:`search` - -Revision: _sha1_ - -Build date: |today| |