diff options
author | Michal Schmidt <mschmidt@redhat.com> | 2016-12-05 14:26:47 -0700 |
---|---|---|
committer | Yunhong Jiang <yunhong.jiang@intel.com> | 2017-04-14 07:05:01 -0400 |
commit | 9cc2aef71f0cee55d641143c136e519df55738a4 (patch) | |
tree | cdceed153851d502b5ee7bdf247d5e8bc9efa6b2 | |
parent | 4d13fcf59772c5dd2f577aedc1f3a1ab0c35c1d1 (diff) |
bnx2x: allow adding VLANs while interface is down
BugLink: http://bugs.launchpad.net/bugs/1616107
Since implementing VLAN filtering in commit 05cc5a39ddb74
("bnx2x: add vlan filtering offload") bnx2x refuses to add a VLAN while
the interface is down:
# ip link add link enp3s0f0 enp3s0f0_10 type vlan id 10
RTNETLINK answers: Bad address
and in dmesg (with bnx2x.debug=0x20):
bnx2x: [bnx2x_vlan_rx_add_vid:12941(enp3s0f0)]Ignoring VLAN
configuration the interface is down
Other drivers have no problem with this.
Fix this peculiar behavior in the following way:
- Accept requests to add/kill VID regardless of the device state.
Maintain the requested list of VIDs in the bp->vlan_reg list.
- If the device is up, try to configure the VID list into the hardware.
If we run out of VLAN credits or encounter a failure configuring an
entry, fall back to accepting all VLANs.
If we successfully configure all entries from the list, turn the
fallback off.
- Use the same code for reconfiguring VLANs during NIC load.
Have to change the signed-off-by line to avoid spam to original people.
S1gned off by: Michal Schmidt <mschmidt@redhat.com>
@cked: Yuval Mintz <Yuval.Mintz@qlogic.com>
S1gned off by: David S. Miller <davem@davemloft.net>
(cherry picked from commit a02cc9d3cc9f98905df214d4a57e5918473260ea)
S1gned off by: Tim Gardner <tim.gardner@canonical.com>
@cked: Seth Forshee <seth.forshee@canonical.com>
S1gned off by: Luis Henriques <luis.henriques@canonical.com>
Upstream status: Backport
Change-Id: Ibcc668daf4815bc984e2611d8c08856a0a7973f1
Backport-by: Yunhong Jiang <yunhong.jiang@linux.intel.com>
Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com>
-rw-r--r-- | kernel/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 151 |
1 files changed, 62 insertions, 89 deletions
diff --git a/kernel/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/kernel/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 1c8123816..ea6478fd9 100644 --- a/kernel/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/kernel/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -12830,52 +12830,71 @@ static int __bnx2x_vlan_configure_vid(struct bnx2x *bp, u16 vid, bool add) return rc; } -int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp) +static int bnx2x_vlan_configure_vid_list(struct bnx2x *bp) { struct bnx2x_vlan_entry *vlan; int rc = 0; - if (!bp->vlan_cnt) { - DP(NETIF_MSG_IFUP, "No need to re-configure vlan filters\n"); - return 0; - } - + /* Configure all non-configured entries */ list_for_each_entry(vlan, &bp->vlan_reg, link) { - /* Prepare for cleanup in case of errors */ - if (rc) { - vlan->hw = false; - continue; - } - - if (!vlan->hw) + if (vlan->hw) continue; - DP(NETIF_MSG_IFUP, "Re-configuring vlan 0x%04x\n", vlan->vid); + if (bp->vlan_cnt >= bp->vlan_credit) + return -ENOBUFS; rc = __bnx2x_vlan_configure_vid(bp, vlan->vid, true); if (rc) { - BNX2X_ERR("Unable to configure VLAN %d\n", vlan->vid); - vlan->hw = false; - rc = -EINVAL; - continue; + BNX2X_ERR("Unable to config VLAN %d\n", vlan->vid); + return rc; } + + DP(NETIF_MSG_IFUP, "HW configured for VLAN %d\n", vlan->vid); + vlan->hw = true; + bp->vlan_cnt++; } - return rc; + return 0; +} + +static void bnx2x_vlan_configure(struct bnx2x *bp, bool set_rx_mode) +{ + bool need_accept_any_vlan; + + need_accept_any_vlan = !!bnx2x_vlan_configure_vid_list(bp); + + if (bp->accept_any_vlan != need_accept_any_vlan) { + bp->accept_any_vlan = need_accept_any_vlan; + DP(NETIF_MSG_IFUP, "Accept all VLAN %s\n", + bp->accept_any_vlan ? "raised" : "cleared"); + if (set_rx_mode) { + if (IS_PF(bp)) + bnx2x_set_rx_mode_inner(bp); + else + bnx2x_vfpf_storm_rx_mode(bp); + } + } +} + +int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp) +{ + struct bnx2x_vlan_entry *vlan; + + /* The hw forgot all entries after reload */ + list_for_each_entry(vlan, &bp->vlan_reg, link) + vlan->hw = false; + bp->vlan_cnt = 0; + + /* Don't set rx mode here. Our caller will do it. */ + bnx2x_vlan_configure(bp, false); + + return 0; } static int bnx2x_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid) { struct bnx2x *bp = netdev_priv(dev); struct bnx2x_vlan_entry *vlan; - bool hw = false; - int rc = 0; - - if (!netif_running(bp->dev)) { - DP(NETIF_MSG_IFUP, - "Ignoring VLAN configuration the interface is down\n"); - return -EFAULT; - } DP(NETIF_MSG_IFUP, "Adding VLAN %d\n", vid); @@ -12883,93 +12902,47 @@ static int bnx2x_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid) if (!vlan) return -ENOMEM; - bp->vlan_cnt++; - if (bp->vlan_cnt > bp->vlan_credit && !bp->accept_any_vlan) { - DP(NETIF_MSG_IFUP, "Accept all VLAN raised\n"); - bp->accept_any_vlan = true; - if (IS_PF(bp)) - bnx2x_set_rx_mode_inner(bp); - else - bnx2x_vfpf_storm_rx_mode(bp); - } else if (bp->vlan_cnt <= bp->vlan_credit) { - rc = __bnx2x_vlan_configure_vid(bp, vid, true); - hw = true; - } - vlan->vid = vid; - vlan->hw = hw; + vlan->hw = false; + list_add_tail(&vlan->link, &bp->vlan_reg); - if (!rc) { - list_add(&vlan->link, &bp->vlan_reg); - } else { - bp->vlan_cnt--; - kfree(vlan); - } - - DP(NETIF_MSG_IFUP, "Adding VLAN result %d\n", rc); + if (netif_running(dev)) + bnx2x_vlan_configure(bp, true); - return rc; + return 0; } static int bnx2x_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, u16 vid) { struct bnx2x *bp = netdev_priv(dev); struct bnx2x_vlan_entry *vlan; + bool found = false; int rc = 0; - if (!netif_running(bp->dev)) { - DP(NETIF_MSG_IFUP, - "Ignoring VLAN configuration the interface is down\n"); - return -EFAULT; - } - DP(NETIF_MSG_IFUP, "Removing VLAN %d\n", vid); - if (!bp->vlan_cnt) { - BNX2X_ERR("Unable to kill VLAN %d\n", vid); - return -EINVAL; - } - list_for_each_entry(vlan, &bp->vlan_reg, link) - if (vlan->vid == vid) + if (vlan->vid == vid) { + found = true; break; + } - if (vlan->vid != vid) { + if (!found) { BNX2X_ERR("Unable to kill VLAN %d - not found\n", vid); return -EINVAL; } - if (vlan->hw) + if (netif_running(dev) && vlan->hw) { rc = __bnx2x_vlan_configure_vid(bp, vid, false); + DP(NETIF_MSG_IFUP, "HW deconfigured for VLAN %d\n", vid); + bp->vlan_cnt--; + } list_del(&vlan->link); kfree(vlan); - bp->vlan_cnt--; - - if (bp->vlan_cnt <= bp->vlan_credit && bp->accept_any_vlan) { - /* Configure all non-configured entries */ - list_for_each_entry(vlan, &bp->vlan_reg, link) { - if (vlan->hw) - continue; - - rc = __bnx2x_vlan_configure_vid(bp, vlan->vid, true); - if (rc) { - BNX2X_ERR("Unable to config VLAN %d\n", - vlan->vid); - continue; - } - DP(NETIF_MSG_IFUP, "HW configured for VLAN %d\n", - vlan->vid); - vlan->hw = true; - } - DP(NETIF_MSG_IFUP, "Accept all VLAN Removed\n"); - bp->accept_any_vlan = false; - if (IS_PF(bp)) - bnx2x_set_rx_mode_inner(bp); - else - bnx2x_vfpf_storm_rx_mode(bp); - } + if (netif_running(dev)) + bnx2x_vlan_configure(bp, true); DP(NETIF_MSG_IFUP, "Removing VLAN result %d\n", rc); |