diff options
Diffstat (limited to 'playbooks/roles/bmra-config/templates/kube-node.j2')
-rw-r--r-- | playbooks/roles/bmra-config/templates/kube-node.j2 | 128 |
1 files changed, 128 insertions, 0 deletions
diff --git a/playbooks/roles/bmra-config/templates/kube-node.j2 b/playbooks/roles/bmra-config/templates/kube-node.j2 new file mode 100644 index 0000000..302fa8f --- /dev/null +++ b/playbooks/roles/bmra-config/templates/kube-node.j2 @@ -0,0 +1,128 @@ +## +## Copyright (c) 2020 Intel Corporation. +## +## Licensed under the Apache License, Version 2.0 (the "License"); +## you may not use this file except in compliance with the License. +## You may obtain a copy of the License at +## +## http://www.apache.org/licenses/LICENSE-2.0 +## +## Unless required by applicable law or agreed to in writing, software +## distributed under the License is distributed on an "AS IS" BASIS, +## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +## See the License for the specific language governing permissions and +## limitations under the License. +## +--- +# Kubernetes node configuration + +# Enable SR-IOV networking related setup +sriov_enabled: {{ bmra.features.sriov.enable }} + +# SR-IOV PF specific configuration list +sriov_nics: +{% for intf in bmra.network_roles.sriov %} + - name: {{ intf.name }} + bus_info: "{{ intf.bus_info }}" + device_info: "{{ intf.device_info }}" + sriov_numvfs: {{ bmra.features.sriov.sriov_vfs_per_port }} + vf_driver: {{ intf.driver }} +{% endfor %} +{% for intf in bmra.network_roles.sriov_dpdk %} + - name: {{ intf.name }} + bus_info: "{{ intf.bus_info }}" + device_info: "{{ intf.device_info }}" + sriov_numvfs: {{ bmra.features.sriov.sriov_dpdk_vfs_per_port }} + vf_driver: {{ intf.driver }} +{% endfor %} + +sriov_cni_enabled: {{ bmra.features.sriov_cni }} + +# Bond CNI +bond_cni_enabled: false + +# install DPDK +install_dpdk: true # DPDK installation is required for sriov_enabled:true; default to false + +# Userspace networking +userspace_cni_enabled: false +ovs_dpdk_enabled: false # Should be enabled with Userspace CNI, when VPP is set to "false"; 1G hugepages required +# CPU mask for OVS-DPDK PMD threads +ovs_dpdk_lcore_mask: 0x1 +# Huge memory pages allocated by OVS-DPDK per NUMA node in megabytes +# example 1: "256,512" will allocate 256MB from node 0 abd 512MB from node 1 +# example 2: "1024" will allocate 1GB fron node 0 on a single socket board, e.g. in a VM +ovs_dpdk_socket_mem: "256,0" +vpp_enabled: false # Should be enabled with Userspace CNI, when ovs_dpdk is set to "false"; 2M hugepages required + +# Set to 'true' to update i40e, ice and iavf kernel modules +update_nic_drivers: false + +# Set 'true' to update NIC firmware +update_nic_firmware: false + +# Additional list of NIC interfaces that the FW update will be executed on +# NOTE: FW update will be also executed on all NICs listed in "sriov_nics[*].name" +firmware_update_nics: + - intf1 + - intf2 + +# install Intel x700 & x800 series NICs DDP packages +install_ddp_packages: false + +# set how many VFs per single QAT device PF should be created +qat_sriov_numvfs: 16 + +# Enables hugepages support +hugepages_enabled: {{ bmra.features.hugepages.enable }} + +# Hugepage sizes available: 2M, 1G +default_hugepage_size: {{ bmra.features.hugepages.default }} + +# Sets how many hugepages of each size should be created +hugepages_1G: {{ bmra.features.hugepages.hugepages_1G }} +hugepages_2M: {{ bmra.features.hugepages.hugepages_2M }} + +# CPU isolation from Linux scheduler +isolcpus_enabled: {{ bmra.features.isolcpus.enable }} +isolcpus: "{{ bmra.features.isolcpus.cpus }}" # Update to match group_vars requested exclusive/shared cores + +# Max number of processors to support (physical & logical cores) +cpu_count: 144 + +# Enable/Disable Intel PState scaling driver +intel_pstate_enabled: true +# Config options for intel_pstate: disable, passive, force, no_hwp, hwp_only, support_acpi_ppc, per_cpu_perf_limits +intel_pstate: disable +# Enable/Disable Intel Turbo Boost PState attribute +turbo_boost_enabled: false + +# Intel Speed Select Base-Frequency configuration. +sst_bf_configuration_enabled: false + +# Intel Speed Select Base-Frequency configuration for Cascade Lake (CLX) Platforms. +# CLX support of SST-BF requires 'intel_pstate' to be 'enabled' +# Option clx_sst_bf_mode requires sst_bf_configuration_enabled to be set to 'true'. +# There are three configuration modes: +# [s] Set SST-BF config (set min/max to 2700/2700 and 2100/2100) +# [m] Set P1 on all cores (set min/max to 2300/2300) +# [r] Revert cores to min/Turbo (set min/max to 800/3900) +clx_sst_bf_mode: s + +# (CentOS 7 only) install real time kernel and related packages for flexran +install_real_time_package: false + +# Telemetry configuration +# intel_pmu plugin collects information provided by Linux perf interface. +enable_intel_pmu_plugin: false +# CPU Threads to be monitored by Intel PMU Plugin. +# If the field is empty, all available cores will be monitored. +# Please refer to https://collectd.org/wiki/index.php/Plugin:Intel_PMU for configuration details. +intel_pmu_plugin_monitored_cores: "" +# CPU Threads to be monitored by Intel RDT Plugin. +# If the field is empty, all available cores will be monitored. +# Please refer to https://collectd.org/wiki/index.php/Plugin:IntelRDT for configuration details. +intel_rdt_plugin_monitored_cores: "" + +# Additional list of plugins that will be excluded from collectd deployment. +exclude_collectd_plugins: [] |