summaryrefslogtreecommitdiffstats
path: root/ci/config_tpl/bundle_tpl/relations.yaml
AgeCommit message (Collapse)AuthorFilesLines
2016-08-05New scripts for configs generation, based on jinja2David Blaisonneau1-0/+95
Signed-off-by: David Blaisonneau <david.blaisonneau@orange.com>
29 2016-07-21Restore the non_hz_fullYunhong Jiang1-2/+8 Please refer to http://comments.gmane.org/gmane.linux.kernel/1891417, the last two mails on this discussion. The non_hz_full is important for RT, so take it back temporarily. Unluckily I didn't find the corresponding reverting patch on the RT tree. Upstream status: pending Change-Id: I2748a8f9b7a98ef2185a1da60089984432393eff Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com> 2016-07-21Add the "timers: do not raise softirq unconditionally" temporarilyYunhong Jiang2-8/+29 This patch enable the nohz_full and is important for RT. Bring it back temporarily, while waiting for more work on RT community. Please refer to https://lkml.org/lkml/2015/3/17/783 for more information of the revert. A little rebase needed because it's reverted on old code base. Please notice that we change the rt_mutex_trylock() so that we can get the tvec_base lock there. This is sure to be wrong, and should be fixed cleanly. And that's the major reason the original patch are reverted on the upstream RT linux. Will discuss with upstream on how to achieve the solution. Upstream status: pending Change-Id: I2747e087faf4145b69b800a60b8d9414bc71e206 Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com> 2016-07-21Merge "KVM: nVMX: keep preemption timer enabled during L2 execution"Jiang, Yunhong1-2/+13 2016-07-21Merge "KVM: nVMX: avoid incorrect preemption timer vmexit in nested guest"Jiang, Yunhong1-0/+2 2016-07-21Merge "KVM: VMX: reflect broken preemption timer in vmcs_config"Jiang, Yunhong1-3/+3 2016-07-21Merge "KVM: vmx: fix missed cancellation of TSC deadline timer"Jiang, Yunhong1-24/+24 2016-07-21Merge "KVM: x86: introduce cancel_hv_tscdeadline"Jiang, Yunhong1-8/+10 2016-07-21Merge "KVM: vmx: fix underflow in TSC deadline calculation"Jiang, Yunhong1-3/+3 2016-07-21Merge "kvm: vmx: hook preemption timer support"Yunhong Jiang3-2/+183 2016-07-21Merge "kvm: vmx: rename vmx_pre/post_block to pi_pre/post_block"Jiang, Yunhong1-2/+15 2016-07-21Merge "KVM: x86: support using the vmx preemption timer for tsc deadline timer"Jiang, Yunhong5-1/+100 2016-07-21Merge "kvm: lapic: separate start_sw_tscdeadline from start_apic_timer"Jiang, Yunhong1-26/+31 2016-07-18KVM: nVMX: keep preemption timer enabled during L2 executionPaolo Bonzini1-2/+13 Because the vmcs12 preemption timer is emulated through a separate hrtimer, we can keep on using the preemption timer in the vmcs02 to emulare L1's TSC deadline timer. However, the corresponding bit in the pin-based execution control field must be kept consistent between vmcs01 and vmcs02. On vmentry we copy it into the vmcs02; on vmexit the preemption timer must be disabled in the vmcs01 if a preemption timer vmexit happened while in guest mode. The preemption timer value in the vmcs02 is set by vmx_vcpu_run, so it need not be considered in prepare_vmcs02. Cc: Yunhong Jiang <yunhong.jiang@intel.com> Cc: Haozhong Zhang <haozhong.zhang@intel.com> Tested-by: Wanpeng Li <kernellwp@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Change-Id: Iffaea7689d4e653dc6224a6f05c6e5ba2fb5c8a8 upstream-status: backport Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com> 2016-07-18KVM: nVMX: avoid incorrect preemption timer vmexit in nested guestWanpeng Li1-0/+2 The preemption timer for nested VMX is emulated by hrtimer which is started on L2 entry, stopped on L2 exit and evaluated via the check_nested_events hook. However, nested_vmx_exit_handled is always returning true for preemption timer vmexit. Then, the L1 preemption timer vmexit is captured and be treated as a L2 preemption timer vmexit, causing NULL pointer dereferences or worse in the L1 guest's vmexit handler: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [< (null)>] (null) PGD 0 Oops: 0010 [#1] SMP Call Trace: ? kvm_lapic_expired_hv_timer+0x47/0x90 [kvm] handle_preemption_timer+0xe/0x20 [kvm_intel] vmx_handle_exit+0x169/0x15a0 [kvm_intel] ? kvm_arch_vcpu_ioctl_run+0xd5d/0x19d0 [kvm] kvm_arch_vcpu_ioctl_run+0xdee/0x19d0 [kvm] ? kvm_arch_vcpu_ioctl_run+0xd5d/0x19d0 [kvm] ? vcpu_load+0x1c/0x60 [kvm] ? kvm_arch_vcpu_load+0x57/0x260 [kvm] kvm_vcpu_ioctl+0x2d3/0x7c0 [kvm] do_vfs_ioctl+0x96/0x6a0 ? __fget_light+0x2a/0x90 SyS_ioctl+0x79/0x90 do_syscall_64+0x68/0x180 entry_SYSCALL64_slow_path+0x25/0x25 Code: Bad RIP value. RIP [< (null)>] (null) RSP <ffff8800b5263c48> CR2: 0000000000000000 ---[ end trace 9c70c48b1a2bc66e ]--- This can be reproduced readily by preemption timer enabled on L0 and disabled on L1. Return false since preemption timer vmexits must never be reflected to L2. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Yunhong Jiang <yunhong.jiang@intel.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Change-Id: Iaffcd503666879e8157c8559876330110a66e5c4 upstream-status: backport Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com> 2016-07-18KVM: VMX: reflect broken preemption timer in vmcs_configPaolo Bonzini1-3/+3 Simplify cpu_has_vmx_preemption_timer. This is consistent with the rest of setup_vmcs_config and preparatory for the next patch. Tested-by: Wanpeng Li <kernellwp@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Change-Id: I3b33a881c5e47d5d3046e28374d0b0ca363ffad7 upstream-status: backport Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com> 2016-07-18KVM: vmx: fix missed cancellation of TSC deadline timerWanpeng Li1-24/+24 INFO: rcu_sched detected stalls on CPUs/tasks: 1-...: (11800 GPs behind) idle=45d/140000000000000/0 softirq=0/0 fqs=21663 (detected by 0, t=65016 jiffies, g=11500, c=11499, q=719) Task dump for CPU 1: qemu-system-x86 R running task 0 3529 3525 0x00080808 ffff8802021791a0 ffff880212895040 0000000000000001 00007f1c2c00db40 ffff8801dd20fcd3 ffffc90002b98000 ffff8801dd20fc88 ffff8801dd20fcf8 0000000000000286 ffff8801dd2ac538 ffff8801dd20fcc0 ffffffffc06949c9 Call Trace: ? kvm_write_guest_cached+0xb9/0x160 [kvm] ? __delay+0xf/0x20 ? wait_lapic_expire+0x14a/0x200 [kvm] ? kvm_arch_vcpu_ioctl_run+0xcbe/0x1b00 [kvm] ? kvm_arch_vcpu_ioctl_run+0xe34/0x1b00 [kvm] ? kvm_vcpu_ioctl+0x2d3/0x7c0 [kvm] ? __fget+0x5/0x210 ? do_vfs_ioctl+0x96/0x6a0 ? __fget_light+0x2a/0x90 ? SyS_ioctl+0x79/0x90 ? do_syscall_64+0x7c/0x1e0 ? entry_SYSCALL64_slow_path+0x25/0x25 This can be reproduced readily by running a full dynticks guest(since hrtimer in guest is heavily used) w/ lapic_timer_advance disabled. If fail to program hardware preemption timer, we will fallback to hrtimer based method, however, a previous programmed preemption timer miss to cancel in this scenario which results in one hardware preemption timer and one hrtimer emulated tsc deadline timer run simultaneously. So sometimes the target guest deadline tsc is earlier than guest tsc, which leads to the computation in vmx_set_hv_timer can underflow and cause delta_tsc to be set a huge value, then host soft lockup as above. This patch fix it by cancelling the previous programmed preemption timer if there is once we failed to program the new preemption timer and fallback to hrtimer based method. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Change-Id: I8a2decefab743aecdfab676fb9267324bf42b848 upstream-status: backport Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com> 2016-07-18KVM: x86: introduce cancel_hv_tscdeadlineWanpeng Li1-8/+10 Introduce cancel_hv_tscdeadline() to encapsulate preemption timer cancel stuff. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Change-Id: Icc038176cbf361a9ecdf37ed3425108db57617f2 upstream-status: backport Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com> 2016-07-18KVM: vmx: fix underflow in TSC deadline calculationPaolo Bonzini1-3/+3 If the TSC deadline timer is programmed really close to the deadline or even in the past, the computation in vmx_set_hv_timer can underflow and cause delta_tsc to be set to a huge value. This generally results in vmx_set_hv_timer returning -ERANGE, but we can fix it by limiting delta_tsc to be positive or zero. Reported-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Change-Id: I12eea18c3ec648dbf782d7754b7b574d7d6aa92c upstream-status: backport Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com> 2016-07-18kvm: vmx: hook preemption timer supportYunhong Jiang3-2/+183 Hook the VMX preemption timer to the "hv timer" functionality added by the previous patch. This includes: checking if the feature is supported, if the feature is broken on the CPU, the hooks to setup/clean the VMX preemption timer, arming the timer on vmentry and handling the vmexit. A module parameter states if the VMX preemption timer should be utilized. Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com> [Move hv_deadline_tsc to struct vcpu_vmx, use -1 as the "unset" value. Put all VMX bits here. Enable it by default #yolo. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Change-Id: Icb8e0b853eedce3d52c394e510fa14d2cdd432e9 upstream-status: backport Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com> 2016-07-18kvm: vmx: rename vmx_pre/post_block to pi_pre/post_blockYunhong Jiang1-2/+15 Prepare to switch from preemption timer to hrtimer in the vmx_pre/post_block. Current functions are only for posted interrupt, rename them accordingly. upstream-status: backport Change-Id: Ie1dde9be21deeb661de095e07d6c29bcba2e7d73 Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com> 2016-07-18KVM: x86: support using the vmx preemption timer for tsc deadline timerYunhong Jiang5-1/+100 The VMX preemption timer can be used to virtualize the TSC deadline timer. The VMX preemption timer is armed when the vCPU is running, and a VMExit will happen if the virtual TSC deadline timer expires. When the vCPU thread is blocked because of HLT, KVM will switch to use an hrtimer, and then go back to the VMX preemption timer when the vCPU thread is unblocked. This solution avoids the complex OS's hrtimer system, and the host timer interrupt handling cost, replacing them with a little math (for guest->host TSC and host TSC->preemption timer conversion) and a cheaper VMexit. This benefits latency for isolated pCPUs. [A word about performance... Yunhong reported a 30% reduction in average latency from cyclictest. I made a similar test with tscdeadline_latency from kvm-unit-tests, and measured - ~20 clock cycles loss (out of ~3200, so less than 1% but still statistically significant) in the worst case where the test halts just after programming the TSC deadline timer - ~800 clock cycles gain (25% reduction in latency) in the best case where the test busy waits. I removed the VMX bits from Yunhong's patch, to concentrate them in the next patch - Paolo] Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Change-Id: I4aa1ecfa3463d1cbfb317511b45d2074b33d9b6f upstream-status: backport Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com> 2016-07-18kvm: lapic: separate start_sw_tscdeadline from start_apic_timerYunhong Jiang1-26/+31 The function to start the tsc deadline timer virtualization will be used also by the pre_block hook when we use the preemption timer; change it to a separate function. No logic changes. upstream-status: backport Change-Id: Ie2fc19108c3252f8a299b17aba16c14aa8d31ae8 Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com> 2016-07-15Fix the failure of launching instances in Horizondavidjchou1-3/+4 In the Mitaka version of OpenStack, Neutron agent uses connmark module to add rules into iptable. Enable this module in opnfv.config to fix the failure of launching instances in Horizon. Upstream status - NA Change-Id: I31f346198a5ba50e83d10210bb5b5e10baf825f3 Signed-off-by: davidjchou <david.j.chou@intel.com> 2016-05-13Build uio as module to fix initialization of i40e devicesJosé Pekkarinen1-1/+1 in bare metal execution of dpdk-16.04. Upstream: NA. Change-Id: Ia98461b15348a667c4989dfe1399f0c5bc0f0c12 Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com> 2016-04-25Add kernel modules required for OPNFVDon Dugger1-130/+732 The OPNFV environment requires many kernel modules that are not part of the default RT kernel environment. This patch adds those modules back in. Upstream status: NA Change-Id: Id4e63f3d2dd3e19614e9e080adf1cdae9ab26ee1 2016-04-22Update opnfv kernel config for the new kernel 4.4.6-rt14.José Pekkarinen1-67/+237 This config file is based in the previous one, adding the changes needed in the config file for this new kernel version. It has been added in kernel support for CephFS. Upstream: NA. Change-Id: I1de8b4678bdfa81f4fc204f4a02d11f11cb5ae87 Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com> 2016-04-13These changes are the raw update to linux-4.4.6-rt14. Kernel sourcesJosé Pekkarinen20902-780094/+2132422 are taken from kernel.org, and rt patch from the rt wiki download page. During the rebasing, the following patch collided: Force tick interrupt and get rid of softirq magic(I70131fb85). Collisions have been removed because its logic was found on the source already. Change-Id: I7f57a4081d9deaa0d9ccfc41a6c8daccdee3b769 Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com> 2016-01-06Merge "Build vfio-pci as a module, as dpdk tools expect it to be."Don Dugger1-2/+2 2016-01-06Fix for KVMFORNFV-23(Fuel installed KVM kernel blank screens on boot).José Pekkarinen1-2/+2 The configuration of the kernel enables the framebuffer console without any framebuffer selected other than i915. Adding the VESA compliant framebuffer should fix this issue. Change-Id: Icc384e05774e1de20985aeb19dfef25ae2431bb6 Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com> 2015-12-02Add virtual functions support to ixgbe and i40e.José Pekkarinen1-1/+1 Change-Id: Iecc8205f443e2e47fc955c80bf6f0aa55db75447 Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com> 2015-12-01Merge "Add configuration to support OVS kernel module"Don Dugger1-7/+13 2015-12-01Merge "Make vfio MSI interrupt be non-threaded."Don Dugger1-1/+1 2015-11-24Make vfio MSI interrupt be non-threaded.Yunhong Jiang1-1/+1 Currently the vfio msi interrupt is kept as IRQ thread, this is not good for NFV scenerio because in NFV scenerio, we want to inject the interrupt to the guest asap. A threaded IRQ introduces schedule latency. However, this change is like a quick and dirty and may bring potential deadlock, because the spinlock_irqsave() from eventfd_signal() is preemptible in RT kernel, which should not be held on IRQ context. But changing it to be raw_spinlock is bad because it will increase the latency a lot if the eventfd is accessed by user space. The deadlock should be ok since for vfio MSI handler is purely kernel story and the lock is a per-eventfd lock and seems no one else is using it for the vfio msi scenario. Upstream status: discussion https://lkml.org/lkml/2015/10/26/764 Change-Id: Ie4405a5b568aa75ca8c3481eeeea228a486b9794 2015-11-20Force tick interrupt and get rid of softirq magicYunhong Jiang2-44/+31 This is a backporting from upstream linux, please refer to http://marc.info/?t=142904577100001&r=1&w=2 for more information, the corresponding kernel commit is 0ff53d09642204c64842 (tick: sched: Force tick interrupt and get rid of softirq magic). The purpose of this patch is, if a tick_sched interrupt is missed, don't try to raise softirq, instead, we can simply trigger the timer interrupt. The reason is, softirq requires context switch and has much higher overhead than interrupt. Upstream status: backport 0ff53d09642204c64842 Change-Id: I70131fb85189d15972fcaa1a2a2fa190270787f9 Back-port-by: Yunhong Jiang <yunhong.jiang@linux.intel.com> 2015-11-20Add configuration to support OVS kernel moduleYunhong Jiang1-7/+13 OVS kernel module is important for NFV. The existed kernel config misses several important kernel configuration, mostly for VxLAN, which is required by the OVS kernel module. Also add the OVS as a module, so that user can use it if needed, or replace it when use the OPNFV patched OVS module. Change-Id: I032f84e0468fc2614557274a50f30d502d39cc52 Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com> 2015-11-17Fix systemd boot.José Pekkarinen1-1/+1 Change-Id: I3e91161abafc62554e793e4851df639c099421e7 Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com> 2015-11-17Build vfio-pci as a module, as dpdk tools expect it to be.José Pekkarinen1-2/+2 Change-Id: I4c0fe67609fc74fc60e6a2c99d448fd47a6d2a86 Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com> 2015-11-17Update the kernel config to match the kernel version shipped.José Pekkarinen1-1/+2 Change-Id: Icd51e1625a57867b2f79cb2b2d1ab21b23bd80e0 Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com> 2015-11-03Merge "Add the opnfv kernel config file"Don Dugger1-0/+3741 2015-10-29Add the opnfv kernel config fileYunhong Jiang1-0/+3741 Kernel config is important for RT linux. A specific config file is provided for the opnfv project to build the reference config options. Currently this config file is assumed to be used for both host and guest kernel. We may split them in future. Change-Id: Ia9ebe0bc002518bb603af8901c6f31531d2f0cee Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com> 2015-10-19These changes are a raw update to a vanilla kernel 4.1.10, with theJosé Pekkarinen343-1508/+3092 recently announced rt patch patch-4.1.10-rt10.patch. No further changes needed. Change-Id: I9a0cf084498133b10771e744b6da4b29dff706ba Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com> 2015-10-09Kernel bump from 4.1.3-rt to 4.1.7-rt.José Pekkarinen628-4568/+6245 These changes brings a vanilla kernel from kernel.org, and the patch applied for rt is patch-4.1.7-rt8.patch. No further changes needed. Change-Id: Id8dd03c2ddd971e4d1d69b905f3069737053b700 Signed-off-by: José Pekkarinen <jose.pekkarinen@nokia.com> 2015-08-04Add the rt linux 4.1.3-rt3 as baseYunhong Jiang