diff options
Diffstat (limited to 'labconfig/intel/pod5/deployment.yaml')
| -rwxr-xr-x | labconfig/intel/pod5/deployment.yaml | 257 |
1 files changed, 257 insertions, 0 deletions
diff --git a/labconfig/intel/pod5/deployment.yaml b/labconfig/intel/pod5/deployment.yaml new file mode 100755 index 00000000..be8a7732 --- /dev/null +++ b/labconfig/intel/pod5/deployment.yaml @@ -0,0 +1,257 @@ +# This file defines the deployment for the MAAS environment which is to be +# deployed and automated. +demo-maas: + maas: + # Defines the general setup for the MAAS environment, including the + # username and password for the host as well as the MAAS server. + user: ubuntu + password: ubuntu + + # Contains the virtual machine parameters for creating the MAAS virtual + # server. Here you can configure the name of the virsh domain, the + # parameters for how the network is attached. + name: opnfv-maas-intel + interfaces: ['bridge=brAdm,model=virtio', 'bridge=brData,model=virtio', 'bridge=brPublic,model=virtio', 'bridge=brExt,model=virtio'] + memory: 4096 + vcpus: 4 + arch: amd64 + pool: default + disk_size: 160G + release: trusty + + # Apt http proxy setting(s) + apt_http_proxy: + + apt_sources: + - ppa:maas/stable + - ppa:juju/stable + + boot_source: + url: http://maas.ubuntu.com/images/ephemeral-v2/daily/ + keyring_filename: /usr/share/keyrings/ubuntu-cloudimage-keyring.gpg + exclusive: true + selections: + 1: + release: trusty + os: ubuntu + arches: amd64 + subarches: "*" + labels: daily + 2: + release: xenial + os: ubuntu + arches: amd64 + subarches: "*" + labels: daily + + # Virsh power settings + # Specifies the uri and keys to use for virsh power control of the + # juju virtual machine. If the uri is omitted, the value for the + # --remote is used. If no power settings are desired, then do not + # supply the virsh block. + virsh: + rsa_priv_key: /home/ubuntu/.ssh/id_rsa + rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub + uri: qemu+ssh://jenkins@10.5.1.1/system + + # Defines the IP Address that the configuration script will use to + # to access the MAAS controller via SSH. + ip_address: 10.5.1.2 + + # This section allows the user to set a series of options on the + # MAAS server itself. The list of config options can be found in + # the upstream MAAS documentation: + # - http://maas.ubuntu.com/docs/api.html#maas-server + settings: + main_archive: http://us.archive.ubuntu.com/ubuntu + upstream_dns: 8.8.8.8 + maas_name: intelpod5 + # kernel_opts: "console=tty0 console=ttyS1,115200n8" + # ntp_server: ntp.ubuntu.com + + # This section is used to define the networking parameters for when + # the node first comes up. It is fed into the meta-data cloud-init + # configuration and is used to configure the networking piece of the + # service. The contents of this section are written directly to the + # /etc/network/interfaces file. + # + # Please note, this is slightly different than the + # node-group-interfaces section below. This will configure the + # machine's networking params, and the node-group-interfaces will + # configure the maas node-group interfaces which is used for + # controlling the dhcp, dns, etc. + network_config: | + auto lo + iface lo inet loopback + + auto eth0 + iface eth0 inet static + address 10.5.1.2 + netmask 255.255.255.0 + network 10.5.1.0 + broadcast 10.5.1.255 + gateway 10.5.1.1 + dns-nameservers 8.8.8.8 10.5.1.2 127.0.0.1 + + auto eth1 + iface eth1 inet static + address 10.5.12.2 + netmask 255.255.255.0 + + auto eth2 + iface eth2 inet static + address 10.5.15.2 + netmask 255.255.255.0 + + auto eth3 + iface eth3 inet static + address 10.2.117.92 + netmask 255.255.255.0 + #auto lo + #iface lo inet loopback + + #auto eth0 + #iface eth0 inet static + # address 192.168.122.2 + # netmask 255.255.248.0 + # network 192.168.122.0 + # broadcast 192.168.122.255 + # gateway 192.168.122.1 + # dns-nameservers 192.168.122.1 127.0.0.1 + + # The node-group-interfaces section is used to configure the MAAS + # network interfaces. Basic configuration is supported, such as which + # device should be bound, the range of IP addresses, etc. + # Note: this may contain the special identifiers: + # ${maas_net} - the first 3 octets of the ipv4 address + # ${maas_ip} - the ip address of the MAAS controller + node_group_ifaces: + - device: eth0 + ip: 10.5.1.2 + subnet_mask: 255.255.255.0 + broadcast_ip: 10.5.1.255 + router_ip: 10.5.1.1 + static_range: + low: 10.5.1.50 + high: 10.5.1.80 + dynamic_range: + low: 10.5.1.81 + high: 10.5.1.250 + - device: eth1 + ip: 10.5.12.2 + subnet_mask: 255.255.255.0 + broadcast_ip: 10.5.12.255 + management: 1 + static_range: + low: 10.5.12.20 + high: 10.5.12.150 + dynamic_range: + low: 10.5.12.151 + high: 10.5.12.200 + - device: eth2 + ip: 10.5.15.2 + subnet_mask: 255.255.255.0 + broadcast_ip: 10.5.15.255 + router_ip: 10.5.15.254 + management: 1 + static_range: + low: 10.5.15.20 + high: 10.5.15.150 + dynamic_range: + low: 10.5.15.151 + high: 10.5.15.200 + + # Defines the physical nodes which are added to the MAAS cluster + # controller upon startup of the node. + nodes: + - name: node1-control + tags: control + architecture: amd64/generic + mac_addresses: + - "00:1e:67:cf:bb:54" + power: + type: ipmi + address: 10.2.117.81 + user: root + pass: root + driver: LAN_2_0 +# sticky_ip_address: +# mac_address: "38:63:bb:43:b8:9c" +# requested_address: 192.168.122.5 +# + - name: node2-control + tags: control + architecture: amd64/generic + mac_addresses: + - "00:1e:67:cf:b8:93" + power: + type: ipmi + address: 10.2.117.82 + user: root + pass: root + driver: LAN_2_0 + + - name: node3-control + tags: control + architecture: amd64/generic + mac_addresses: + - "00:1e:67:e0:08:7f" + power: + type: ipmi + address: 10.2.117.83 + user: root + pass: root + driver: LAN_2_0 +# sticky_ip_address: +# mac_address: "38:63:bb:43:b8:9c" +# requested_address: 192.168.122.5 + + - name: node4-compute + tags: compute + architecture: amd64/generic + mac_addresses: + - "00:1e:67:e0:08:b1" + power: + type: ipmi + address: 10.2.117.84 + user: root + pass: root + driver: LAN_2_0 +# sticky_ip_address: +# mac_address: "38:63:bb:43:b8:9c" +# requested_address: 192.168.122.5 + + - name: node5-compute + tags: compute + architecture: amd64/generic + mac_addresses: + - "00:1e:67:e0:0a:4b" + power: + type: ipmi + address: 10.2.117.85 + user: root + pass: root + driver: LAN_2_0 +# sticky_ip_address: +# mac_address: "38:63:bb:43:b8:9c" +# requested_address: 192.168.122.5 + +# - name: jenkins-slave +# tags: jenkins-slave +# architecture: amd64/generic +# mac_addresses: +# - "52:54:00:f0:5c:53" +# power: +# type: virsh +# address: qemu+ssh://ubuntu@10.4.1.1/system + + # Contains the virtual machine parameters for creating the Juju bootstrap + # node virtual machine + juju-bootstrap: + name: bootstrap + interfaces: ['bridge=brAdm,model=virtio', 'bridge=brPublic,model=virtio', 'bridge=brExt,model=virtio'] + memory: 4096 + vcpus: 4 + arch: amd64 + pool: default + disk_size: 120G |