diff options
Diffstat (limited to 'ci')
| -rw-r--r-- | ci/maas/juniper/pod1/compute-interfaces.host | 24 | ||||
| -rw-r--r-- | ci/maas/juniper/pod1/control-interfaces.host | 24 | ||||
| -rwxr-xr-x[-rw-r--r--] | ci/maas/juniper/pod1/deployment.yaml | 410 | ||||
| -rw-r--r-- | ci/maas/juniper/pod1/environments.yaml | 80 | ||||
| -rw-r--r-- | ci/maas/juniper/pod1/interfaces.host | 24 | ||||
| -rw-r--r-- | ci/maas/juniper/pod1/lxc-add-more-interfaces | 35 | ||||
| -rwxr-xr-x | ci/maas/orange/pod2/deployment.yaml | 18 |
7 files changed, 224 insertions, 391 deletions
diff --git a/ci/maas/juniper/pod1/compute-interfaces.host b/ci/maas/juniper/pod1/compute-interfaces.host deleted file mode 100644 index afa009c9..00000000 --- a/ci/maas/juniper/pod1/compute-interfaces.host +++ /dev/null @@ -1,24 +0,0 @@ -#### original juju generated part ####
-auto lo
-
-# Primary interface (defining the default route)
-iface p2p1 inet manual
-
-# Bridge to use for LXC/KVM containers
-auto juju-br0
-iface juju-br0 inet dhcp
- bridge_ports p2p1
-######################################
-
-auto p2p2
-iface p2p2 inet manual
-
-# The public network interface
-
-auto brPublic
-iface brPublic inet dhcp
- bridge_ports p2p2
- bridge_stp off
- bridge_fd 0
- bridge_maxwait 0
-
diff --git a/ci/maas/juniper/pod1/control-interfaces.host b/ci/maas/juniper/pod1/control-interfaces.host deleted file mode 100644 index 95ff6713..00000000 --- a/ci/maas/juniper/pod1/control-interfaces.host +++ /dev/null @@ -1,24 +0,0 @@ -#### original juju generated part ####
-auto lo
-
-# Primary interface (defining the default route)
-iface p1p1 inet manual
-
-# Bridge to use for LXC/KVM containers
-auto juju-br0
-iface juju-br0 inet dhcp
- bridge_ports p1p1
-######################################
-
-auto p1p2
-iface p1p2 inet manual
-
-# The public network interface
-
-auto brPublic
-iface brPublic inet dhcp
- bridge_ports p1p2
- bridge_stp off
- bridge_fd 0
- bridge_maxwait 0
-
diff --git a/ci/maas/juniper/pod1/deployment.yaml b/ci/maas/juniper/pod1/deployment.yaml index bd84147e..efb49372 100644..100755 --- a/ci/maas/juniper/pod1/deployment.yaml +++ b/ci/maas/juniper/pod1/deployment.yaml @@ -1,235 +1,175 @@ -# This file defines the deployment for the MAAS environment which is to be
-# deployed and automated.
-demo-maas:
- maas:
- # Defines the general setup for the MAAS environment, including the
- # username and password for the host as well as the MAAS server.
- user: ubuntu
- password: ubuntu
-
- # Contains the virtual machine parameters for creating the MAAS virtual
- # server. Here you can configure the name of the virsh domain, the
- # parameters for how the network is attached.
- name: opnfv-maas-juniper
- interfaces: ['bridge=brAdm,model=virtio','bridge=brPublic,model=virtio']
- #interfaces: ['bridge=brAdm,model=virtio','bridge=brData,model=virtio','bridge=brPublic,model=virtio']
- memory: 4096
- vcpus: 1
- arch: amd64
- pool: default
- disk_size: 160G
-
- # Apt http proxy setting(s)
- apt_http_proxy:
-
- apt_sources:
- - ppa:maas/stable
- - ppa:juju/stable
-
- # Virsh power settings
- # Specifies the uri and keys to use for virsh power control of the
- # juju virtual machine. If the uri is omitted, the value for the
- # --remote is used. If no power settings are desired, then do not
- # supply the virsh block.
- virsh:
- rsa_priv_key: /home/ubuntu/.ssh/id_rsa
- rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub
- uri: qemu+ssh://ubuntu@172.16.50.51/system
-
- # Defines the IP Address that the configuration script will use to
- # to access the MAAS controller via SSH.
- ip_address: 172.16.50.50
-
- # This section allows the user to set a series of options on the
- # MAAS server itself. The list of config options can be found in
- # the upstream MAAS documentation:
- # - http://maas.ubuntu.com/docs/api.html#maas-server
- settings:
- main_archive: http://us.archive.ubuntu.com/ubuntu
- upstream_dns: 8.8.8.8
- maas_name: juniperpod1
- # kernel_opts: "console=tty0 console=ttyS1,115200n8"
- # ntp_server: ntp.ubuntu.com
-
- # This section is used to define the networking parameters for when
- # the node first comes up. It is fed into the meta-data cloud-init
- # configuration and is used to configure the networking piece of the
- # service. The contents of this section are written directly to the
- # /etc/network/interfaces file.
- #
- # Please note, this is slightly different than the
- # node-group-interfaces section below. This will configure the
- # machine's networking params, and the node-group-interfaces will
- # configure the maas node-group interfaces which is used for
- # controlling the dhcp, dns, etc.
- network_config: |
- auto lo
- iface lo inet loopback
-
- auto eth0
- iface eth0 inet static
- address 172.16.50.50
- netmask 255.255.255.0
- network 172.16.50.0
- broadcast 172.16.50.255
- #gateway x.x.x.x
- dns-nameservers 8.8.8.8 127.0.0.1
-
- auto eth1
- iface eth1 inet static
- address 10.10.15.50
- netmask 255.255.240.0
- network 10.10.0.0
- broadcast 10.10.15.255
- gateway 10.10.10.1
-
- #auto eth2
- #iface eth2 inet static
- #address 10.2.65.3
- #netmask 255.255.255.0
- #network 10.2.65.0
- #broadcast 10.2.65.255
-
- # The node-group-interfaces section is used to configure the MAAS
- # network interfaces. Basic configuration is supported, such as which
- # device should be bound, the range of IP addresses, etc.
- # Note: this may contain the special identifiers:
- # ${maas_net} - the first 3 octets of the ipv4 address
- # ${maas_ip} - the ip address of the MAAS controller
- node_group_ifaces:
- - device: eth0
- ip: 172.16.50.50
- subnet_mask: 255.255.255.0
- broadcast_ip: 172.16.50.255
- router_ip: 172.16.50.50
- static_range:
- low: 172.16.50.60
- high: 172.16.50.129
- dynamic_range:
- low: 172.16.50.130
- high: 172.16.50.200
- #- device: eth1
- # ip: 10.10.15.50
- # subnet_mask: 255.255.240.0
- # broadcast_ip: 10.10.15.255
- # router_ip: 10.10.10.1
- #management: 1
- # static_range:
- # low: 10.10.15.60
- # high: 10.10.15.129
- # dynamic_range:
- # low: 10.10.15.130
- # high: 10.10.15.200
- #- device: eth2
- # ip: 10.2.65.3
- # subnet_mask: 255.255.255.0
- # broadcast_ip: 10.2.65.255
- # management: 1
- # static_range:
- # low: 10.2.65.20
- # high: 10.2.65.100
- # dynamic_range:
- # low: 10.2.65.101
- # high: 10.2.65.200
- # Defines the physical nodes which are added to the MAAS cluster
- # controller upon startup of the node.
-
- # Juniper pod1: server 2, 4 and 6 have 32GB RAM and 4 cores. server 3
- # and 5 have 64GB RAM and 12 cores. Make server 2, 4 and 6 as control
- # nodes and 3 and 5 as compute nodes.
- nodes:
- - name: 2-R4N4B2-control
- tags: control
- architecture: amd64/generic
- mac_addresses:
- - "0c:c4:7a:16:2a:70"
- power:
- type: ipmi
- address: 10.10.7.92
- user: ADMIN
- pass: ADMIN
- driver: LAN_2_0
-# sticky_ip_address:
-# mac_address: "38:63:bb:43:b8:9c"
-# requested_address: 192.168.122.5
-
- - name: 3-R4N3B1-compute
- tags: compute
- architecture: amd64/generic
- mac_addresses:
- - "0c:c4:7a:53:57:c2"
- power:
- type: ipmi
- address: 10.10.7.84
- user: ADMIN
- pass: ADMIN
- driver: LAN_2_0
-# sticky_ip_address:
-# mac_address: "38:63:bb:43:b8:9c"
-# requested_address: 192.168.122.5
-
- - name: 4-R4N4B4-control
- tags: control
- architecture: amd64/generic
- mac_addresses:
- - "0c:c4:7a:16:22:9c"
- power:
- type: ipmi
- address: 10.10.7.95
- user: ADMIN
- pass: ADMIN
- driver: LAN_2_0
-# sticky_ip_address:
-# mac_address: "38:63:bb:43:b8:9c"
-# requested_address: 192.168.122.5
-
- - name: 5-R4N3B2-compute
- tags: compute
- architecture: amd64/generic
- mac_addresses:
- - "0c:c4:7a:53:57:16"
- power:
- type: ipmi
- address: 10.10.7.85
- user: ADMIN
- pass: ADMIN
- driver: LAN_2_0
-# sticky_ip_address:
-# mac_address: "38:63:bb:43:b8:9c"
-# requested_address: 192.168.122.5
-
- - name: 6-R4N4B3-control
- tags: control
- architecture: amd64/generic
- mac_addresses:
- - "0c:c4:7a:16:2a:0a"
- power:
- type: ipmi
- address: 10.10.7.93
- user: ADMIN
- pass: ADMIN
- driver: LAN_2_0
-# sticky_ip_address:
-# mac_address: "38:63:bb:43:b8:9c"
-# requested_address: 192.168.122.5
-
-# - name: jenkins-slave
-# tags: jenkins-slave
-# architecture: amd64/generic
-# mac_addresses:
-# - "52:54:00:f0:5c:53"
-# power:
-# type: virsh
-# address: qemu+ssh://ubuntu@10.4.1.1/system
-
- # Contains the virtual machine parameters for creating the Juju bootstrap
- # node virtual machine
- juju-bootstrap:
- name: bootstrap
- interfaces: ['bridge=brAdm,model=virtio','bridge=brPublic,model=virtio']
- #interfaces: ['bridge=brAdm,model=virtio','bridge=brData,model=virtio','bridge=brPublic,model=virtio']
- memory: 4096
- vcpus: 2
- arch: amd64
- pool: default
- disk_size: 120G
+# This file defines the deployment for the MAAS environment which is to be +# deployed and automated. +demo-maas: + maas: + # Defines the general setup for the MAAS environment, including the + # username and password for the host as well as the MAAS server. + user: ubuntu + password: ubuntu + + # Contains the virtual machine parameters for creating the MAAS virtual + # server. Here you can configure the name of the virsh domain, the + # parameters for how the network is attached. + name: opnfv-maas-juniper + interfaces: ['bridge=brAdm,model=virtio', 'bridge=brPublic,model=virtio'] + memory: 4096 + vcpus: 1 + arch: amd64 + pool: default + disk_size: 160G + + # Apt http proxy setting(s) + apt_http_proxy: + + apt_sources: + - ppa:maas/stable + - ppa:juju/stable + + # Virsh power settings + # Specifies the uri and keys to use for virsh power control of the + # juju virtual machine. If the uri is omitted, the value for the + # --remote is used. If no power settings are desired, then do not + # supply the virsh block. + virsh: + rsa_priv_key: /home/ubuntu/.ssh/id_rsa + rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub + uri: qemu+ssh://ubuntu@172.16.50.51/system + + # Defines the IP Address that the configuration script will use to + # to access the MAAS controller via SSH. + ip_address: 172.16.50.50 + + # This section allows the user to set a series of options on the + # MAAS server itself. The list of config options can be found in + # the upstream MAAS documentation: + # - http://maas.ubuntu.com/docs/api.html#maas-server + settings: + main_archive: http://us.archive.ubuntu.com/ubuntu + upstream_dns: 8.8.8.8 + maas_name: juniperpod1 + # kernel_opts: "console=tty0 console=ttyS1,115200n8" + # ntp_server: ntp.ubuntu.com + + # This section is used to define the networking parameters for when + # the node first comes up. It is fed into the meta-data cloud-init + # configuration and is used to configure the networking piece of the + # service. The contents of this section are written directly to the + # /etc/network/interfaces file. + # + # Please note, this is slightly different than the + # node-group-interfaces section below. This will configure the + # machine's networking params, and the node-group-interfaces will + # configure the maas node-group interfaces which is used for + # controlling the dhcp, dns, etc. + network_config: | + auto lo + iface lo inet loopback + + auto eth0 + iface eth0 inet static + address 172.16.50.50 + netmask 255.255.255.0 + network 172.16.50.0 + broadcast 172.16.50.255 + dns-nameservers 8.8.8.8 127.0.0.1 + + auto eth1 + iface eth1 inet static + address 10.10.15.50 + netmask 255.255.240.0 + network 10.10.0.0 + broadcast 10.10.15.255 + gateway 10.10.10.1 + + # The node-group-interfaces section is used to configure the MAAS + # network interfaces. Basic configuration is supported, such as which + # device should be bound, the range of IP addresses, etc. + # Note: this may contain the special identifiers: + # ${maas_net} - the first 3 octets of the ipv4 address + # ${maas_ip} - the ip address of the MAAS controller + node_group_ifaces: + - device: eth0 + ip: 172.16.50.50 + subnet_mask: 255.255.255.0 + broadcast_ip: 172.16.50.255 + router_ip: 172.16.50.50 + static_range: + low: 172.16.50.60 + high: 172.16.50.90 + dynamic_range: + low: 172.16.50.91 + high: 172.16.50.254 + + # Defines the physical nodes which are added to the MAAS cluster + # controller upon startup of the node. + nodes: + - name: 2-R4N4B2-control + tags: control + architecture: amd64/generic + mac_addresses: + - "0c:c4:7a:16:2a:70" + power: + type: ipmi + address: 10.10.7.92 + user: ADMIN + pass: ADMIN + driver: LAN_2_0 + + - name: 3-R4N3B1-compute + tags: compute + architecture: amd64/generic + mac_addresses: + - "0c:c4:7a:53:57:c2" + power: + type: ipmi + address: 10.10.7.84 + user: ADMIN + pass: ADMIN + driver: LAN_2_0 + + - name: 4-R4N4B4-control + tags: control + architecture: amd64/generic + mac_addresses: + - "0c:c4:7a:16:22:9c" + power: + type: ipmi + address: 10.10.7.95 + user: ADMIN + pass: ADMIN + driver: LAN_2_0 + + - name: 5-R4N3B2-compute + tags: compute + architecture: amd64/generic + mac_addresses: + - "0c:c4:7a:53:57:16" + power: + type: ipmi + address: 10.10.7.85 + user: ADMIN + pass: ADMIN + driver: LAN_2_0 + + - name: 6-R4N4B3-control + tags: control + architecture: amd64/generic + mac_addresses: + - "0c:c4:7a:16:2a:0a" + power: + type: ipmi + address: 10.10.7.93 + user: ADMIN + pass: ADMIN + driver: LAN_2_0 + + # Contains the virtual machine parameters for creating the Juju bootstrap + # node virtual machine + juju-bootstrap: + name: bootstrap + interfaces: ['bridge=brAdm,model=virtio', 'bridge=brPublic,model=virtio'] + memory: 4096 + vcpus: 2 + arch: amd64 + pool: default + disk_size: 120G diff --git a/ci/maas/juniper/pod1/environments.yaml b/ci/maas/juniper/pod1/environments.yaml index 5897f32b..d138e53d 100644 --- a/ci/maas/juniper/pod1/environments.yaml +++ b/ci/maas/juniper/pod1/environments.yaml @@ -1,40 +1,40 @@ -default: demo-maas
-
-environments:
-
- # https://juju.ubuntu.com/docs/config-maas.html
- demo-maas:
- type: maas
-
- # maas-server specifies the location of the MAAS server. It must
- # specify the base path.
- #
- maas-server: 'http://10.4.1.2/MAAS'
-
- # maas-oauth holds the OAuth credentials from MAAS.
- #
- maas-oauth: 'HyacKVwxBVE9xwmJW7:CVwUpERLN3fDUbkUra:ETW88KVJxDHQA3kqmZgghUQnzanSFwH4'
-
- # maas-server bootstrap ssh connection options
- #
-
- # bootstrap-timeout time to wait contacting a state server, in seconds.
- bootstrap-timeout: 1800
-
- # Whether or not to refresh the list of available updates for an
- # OS. The default option of true is recommended for use in
- # production systems, but disabling this can speed up local
- # deployments for development or testing.
- #
- enable-os-refresh-update: false
-
- # Whether or not to perform OS upgrades when machines are
- # provisioned. The default option of true is recommended for use
- # in production systems, but disabling this can speed up local
- # deployments for development or testing.
- #
- enable-os-upgrade: false
-
-
- admin-secret: admin
- default-series: trusty
+default: demo-maas + +environments: + + # https://juju.ubuntu.com/docs/config-maas.html + demo-maas: + type: maas + + # maas-server specifies the location of the MAAS server. It must + # specify the base path. + # + maas-server: 'http://10.4.1.2/MAAS' + + # maas-oauth holds the OAuth credentials from MAAS. + # + maas-oauth: 'HyacKVwxBVE9xwmJW7:CVwUpERLN3fDUbkUra:ETW88KVJxDHQA3kqmZgghUQnzanSFwH4' + + # maas-server bootstrap ssh connection options + # + + # bootstrap-timeout time to wait contacting a state server, in seconds. + bootstrap-timeout: 1800 + + # Whether or not to refresh the list of available updates for an + # OS. The default option of true is recommended for use in + # production systems, but disabling this can speed up local + # deployments for development or testing. + # + enable-os-refresh-update: false + + # Whether or not to perform OS upgrades when machines are + # provisioned. The default option of true is recommended for use + # in production systems, but disabling this can speed up local + # deployments for development or testing. + # + enable-os-upgrade: false + + + admin-secret: admin + default-series: trusty diff --git a/ci/maas/juniper/pod1/interfaces.host b/ci/maas/juniper/pod1/interfaces.host deleted file mode 100644 index 95ff6713..00000000 --- a/ci/maas/juniper/pod1/interfaces.host +++ /dev/null @@ -1,24 +0,0 @@ -#### original juju generated part ####
-auto lo
-
-# Primary interface (defining the default route)
-iface p1p1 inet manual
-
-# Bridge to use for LXC/KVM containers
-auto juju-br0
-iface juju-br0 inet dhcp
- bridge_ports p1p1
-######################################
-
-auto p1p2
-iface p1p2 inet manual
-
-# The public network interface
-
-auto brPublic
-iface brPublic inet dhcp
- bridge_ports p1p2
- bridge_stp off
- bridge_fd 0
- bridge_maxwait 0
-
diff --git a/ci/maas/juniper/pod1/lxc-add-more-interfaces b/ci/maas/juniper/pod1/lxc-add-more-interfaces deleted file mode 100644 index 64519097..00000000 --- a/ci/maas/juniper/pod1/lxc-add-more-interfaces +++ /dev/null @@ -1,35 +0,0 @@ -#!/bin/bash
-
-set -e
-set -u
-
-cat <<EOF >> "$LXC_CONFIG_FILE"
-
-EOF
-
-USERDATA="$LXC_ROOTFS_PATH/var/lib/cloud/seed/nocloud-net/user-data"
-
-additional_interfaces="
-- |
- cat <<EOF >> /etc/network/interfaces.d/additional-interfaces
- ## added by juju charm
- ## those interfaces will be brought up by the upstart job as /etc/init/additional-interfaces.conf
- ## LP: #1483932
- EOF
-- machine_agent=\$(hostname | sed -e 's/^juju-/jujud-/')
-- |
- cat <<EOF > /etc/init/additional-interfaces.conf
- ## added by juju charm
- ## LP: #1483932
- start on started \${machine_agent}
-
- script
- sleep 10
- ifup -a -i /etc/network/interfaces.d/additional-interfaces
- end script
- EOF
-"
-additional_interfaces=$(echo "$additional_interfaces" | sed -e 's/$/\\n/' | tr -d '\n')
-
-sed -i.orig -e "s@^runcmd:@\0$additional_interfaces@" \
- "$USERDATA"
diff --git a/ci/maas/orange/pod2/deployment.yaml b/ci/maas/orange/pod2/deployment.yaml index d035f78e..69af58d9 100755 --- a/ci/maas/orange/pod2/deployment.yaml +++ b/ci/maas/orange/pod2/deployment.yaml @@ -114,10 +114,10 @@ demo-maas: router_ip: 192.168.2.1 static_range: low: 192.168.2.50 - high: 192.168.2.99 + high: 192.168.2.80 dynamic_range: - low: 192.168.2.100 - high: 192.168.2.200 + low: 192.168.2.81 + high: 192.168.2.254 - device: eth1 ip: 192.168.12.5 subnet_mask: 255.255.255.0 @@ -125,10 +125,10 @@ demo-maas: management: 1 static_range: low: 192.168.12.50 - high: 192.168.12.99 + high: 192.168.12.80 dynamic_range: - low: 192.168.12.100 - high: 192.168.12.200 + low: 192.168.12.81 + high: 192.168.12.254 - device: eth2 ip: 192.168.22.5 subnet_mask: 255.255.255.0 @@ -136,10 +136,10 @@ demo-maas: management: 1 static_range: low: 192.168.22.50 - high: 192.168.22.99 + high: 192.168.22.80 dynamic_range: - low: 192.168.22.100 - high: 192.168.22.200 + low: 192.168.22.81 + high: 192.168.22.254 # Defines the physical nodes which are added to the MAAS cluster # controller upon startup of the node. |