diff options
Diffstat (limited to 'ci')
| -rw-r--r-- | ci/maas/att/virpod1/deployment.yaml | 46 |
1 files changed, 23 insertions, 23 deletions
diff --git a/ci/maas/att/virpod1/deployment.yaml b/ci/maas/att/virpod1/deployment.yaml index dd57d150..1400c7b1 100644 --- a/ci/maas/att/virpod1/deployment.yaml +++ b/ci/maas/att/virpod1/deployment.yaml @@ -5,7 +5,7 @@ demo-maas: # Defines the general setup for the MAAS environment, including the # username and password for the host as well as the MAAS server. user: ubuntu - password: ubuntu + password: opnfv-joid # Contains the virtual machine parameters for creating the MAAS virtual # server. Here you can configure the name of the virsh domain, the @@ -33,11 +33,11 @@ demo-maas: virsh: rsa_priv_key: /home/ubuntu/.ssh/id_rsa rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub - uri: qemu+ssh://ubuntu@192.168.1.2/system + uri: qemu+ssh://ubuntu@192.168.10.2/system # Defines the IP Address that the configuration script will use to # to access the MAAS controller via SSH. - ip_address: 192.168.1.2 + ip_address: 192.168.10.3 # This section allows the user to set a series of options on the # MAAS server itself. The list of config options can be found in @@ -45,8 +45,8 @@ demo-maas: # - http://maas.ubuntu.com/docs/api.html#maas-server settings: main_archive: http://us.archive.ubuntu.com/ubuntu - upstream_dns: 192.168.1.2 - maas_name: intelpod6 + upstream_dns: 192.168.10.1 + maas_name: attvirpod1 # kernel_opts: "console=tty0 console=ttyS1,115200n8" # ntp_server: ntp.ubuntu.com @@ -67,12 +67,12 @@ demo-maas: auto eth0 iface eth0 inet static - address 192.168.1.2 + address 192.168.10.3 netmask 255.255.255.0 - network 192.168.1.0 - broadcast 192.168.1.255 - gateway 192.168.1.1 - dns-nameservers 192.168.1.1 127.0.0.1 + network 192.168.10.0 + broadcast 192.168.10.255 + gateway 192.168.10.1 + dns-nameservers 192.168.10.1 127.0.0.1 # The node-group-interfaces section is used to configure the MAAS # network interfaces. Basic configuration is supported, such as which @@ -82,37 +82,37 @@ demo-maas: # ${maas_ip} - the ip address of the MAAS controller node_group_ifaces: - device: eth0 - ip: 192.168.1.2 + ip: 192.168.10.3 subnet_mask: 255.255.255.0 - broadcast_ip: 192.168.1.255 - router_ip: 192.168.1.1 + broadcast_ip: 192.168.10.255 + router_ip: 192.168.10.1 static_range: - low: 192.168.1.20 - high: 192.168.1.100 + low: 192.168.10.20 + high: 192.168.10.100 dynamic_range: - low: 192.168.1.101 - high: 192.168.1.200 + low: 192.168.10.101 + high: 192.168.10.200 # Defines the physical nodes which are added to the MAAS cluster # controller upon startup of the node. nodes: - - name: node2-control + - name: controller1 tags: control architecture: amd64/generic mac_addresses: - - "00:1e:67:e0:0b:71" + - "B8:AE:ED:76:FB:45" power: type: ether_wake - address: 38:63:bb:43:b8:9c + address: B8:AE:ED:76:FB:45 - - name: node5-compute + - name: compute1 tags: compute architecture: amd64/generic mac_addresses: - - "00:1e:67:cf:bc:f7" + - "B8:AE:ED:76:FB:C4" power: type: ether_wake - address: 38:63:bb:43:b8:9d + address: B8:AE:ED:76:FB:C4 # Contains the virtual machine parameters for creating the Juju bootstrap # node virtual machine |