diff options
Diffstat (limited to 'ci/maas')
| -rwxr-xr-x | ci/maas/intel/pod5/deployment.yaml | 201 | ||||
| -rw-r--r-- | ci/maas/intel/pod5/environment.yaml | 36 | ||||
| -rwxr-xr-x | ci/maas/intel/pod6/deployment.yaml | 201 | ||||
| -rwxr-xr-x | ci/maas/orange/pod2/deployment.yaml | 201 |
4 files changed, 639 insertions, 0 deletions
diff --git a/ci/maas/intel/pod5/deployment.yaml b/ci/maas/intel/pod5/deployment.yaml new file mode 100755 index 00000000..caae88bd --- /dev/null +++ b/ci/maas/intel/pod5/deployment.yaml @@ -0,0 +1,201 @@ +# This file defines the deployment for the MAAS environment which is to be +# deployed and automated. +demo-maas: + maas: + # Defines the general setup for the MAAS environment, including the + # username and password for the host as well as the MAAS server. + user: ubuntu + password: ubuntu + + # Contains the virtual machine parameters for creating the MAAS virtual + # server. Here you can configure the name of the virsh domain, the + # parameters for how the network is attached. + name: maas-boot-vm-dc1 + interfaces: ['bridge=br0,model=virtio'] + memory: 4096 + vcpus: 2 + arch: amd64 + pool: default + disk_size: 160G + + # Apt http proxy setting(s) + apt_http_proxy: + + apt_sources: + - ppa:maas/stable + - ppa:juju/stable + + # Virsh power settings + # Specifies the uri and keys to use for virsh power control of the + # juju virtual machine. If the uri is omitted, the value for the + # --remote is used. If no power settings are desired, then do not + # supply the virsh block. + virsh: + rsa_priv_key: /home/ubuntu/.ssh/id_rsa + rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub + uri: qemu+ssh://ubuntu@10.4.1.1/system + + # Defines the IP Address that the configuration script will use to + # to access the MAAS controller via SSH. + ip_address: 10.4.1.2 + + # This section allows the user to set a series of options on the + # MAAS server itself. The list of config options can be found in + # the upstream MAAS documentation: + # - http://maas.ubuntu.com/docs/api.html#maas-server + settings: + main_archive: http://us.archive.ubuntu.com/ubuntu + upstream_dns: 10.4.0.2 + maas_name: automaas + # kernel_opts: "console=tty0 console=ttyS1,115200n8" + # ntp_server: ntp.ubuntu.com + + # This section is used to define the networking parameters for when + # the node first comes up. It is fed into the meta-data cloud-init + # configuration and is used to configure the networking piece of the + # service. The contents of this section are written directly to the + # /etc/network/interfaces file. + # + # Please note, this is slightly different than the + # node-group-interfaces section below. This will configure the + # machine's networking params, and the node-group-interfaces will + # configure the maas node-group interfaces which is used for + # controlling the dhcp, dns, etc. + network_config: | + auto lo + iface lo inet loopback + + auto eth0 + iface eth0 inet static + address 10.4.1.2 + netmask 255.255.248.0 + network 10.4.0.0 + broadcast 10.4.7.255 + gateway 10.4.0.1 + dns-nameservers 10.4.0.2 127.0.0.1 + + #auto lo + #iface lo inet loopback + + #auto eth0 + #iface eth0 inet static + # address 192.168.122.2 + # netmask 255.255.248.0 + # network 192.168.122.0 + # broadcast 192.168.122.255 + # gateway 192.168.122.1 + # dns-nameservers 192.168.122.1 127.0.0.1 + + # The node-group-interfaces section is used to configure the MAAS + # network interfaces. Basic configuration is supported, such as which + # device should be bound, the range of IP addresses, etc. + # Note: this may contain the special identifiers: + # ${maas_net} - the first 3 octets of the ipv4 address + # ${maas_ip} - the ip address of the MAAS controller + node_group_ifaces: + - device: eth0 + ip: 10.4.1.2 + subnet_mask: 255.255.248.0 + broadcast_ip: 10.4.7.255 + router_ip: 10.4.0.1 + static_range: + low: 10.4.2.20 + high: 10.4.2.254 + dynamic_range: + low: 10.4.1.50 + high: 10.4.1.254 + + # Defines the physical nodes which are added to the MAAS cluster + # controller upon startup of the node. + nodes: + - name: node1 + tags: physical + architecture: amd64/generic + mac_addresses: + - "00:1e:67:e0:0a:4a" + - "00:1e:67:e0:0a:4b" + - "00:1e:67:d0:9a:10" + - "00:1e:67:d0:9a:11" + power: + type: ipmi + address: 10.4.2.8 + user: root + pass: root + driver: LAN_2_0 +# sticky_ip_address: +# mac_address: "38:63:bb:43:b8:9c" +# requested_address: 192.168.122.5 + + - name: node2 + tags: physical + architecture: amd64/generic + mac_addresses: + - "00:1e:67:e0:08:b0" + - "00:1e:67:e0:08:b1" + - "00:1e:67:d0:99:ee" + - "00:1e:67:d0:99:ef" + power: + type: ipmi + address: 10.4.2.9 + user: root + pass: root + driver: LAN_2_0 +# sticky_ip_address: +# mac_address: "38:63:bb:43:b8:9c" +# requested_address: 192.168.122.5 + + - name: node3 + tags: physical + architecture: amd64/generic + mac_addresses: + - "00:1e:67:e0:08:7e" + - "00:1e:67:e0:08:7f" + - "00:1e:67:c2:23:d8" + - "00:1e:67:c2:23:d9" + power: + type: ipmi + address: 10.4.2.7 + user: root + pass: root + driver: LAN_2_0 +# sticky_ip_address: +# mac_address: "38:63:bb:43:b8:9c" +# requested_address: 192.168.122.5 + + - name: node4 + tags: physical + architecture: amd64/generic + mac_addresses: + - "00:1e:67:cf:b8:92" + - "00:1e:67:cf:b8:93" + - "00:1e:67:d0:9b:0c" + - "00:1e:67:d0:9b:0d" + power: + type: ipmi + address: 10.4.2.10 + user: root + pass: root + driver: LAN_2_0 +# sticky_ip_address: +# mac_address: "38:63:bb:43:b8:9c" +# requested_address: 192.168.122.5 + +# - name: jenkins-slave +# tags: jenkins-slave +# architecture: amd64/generic +# mac_addresses: +# - "52:54:00:f0:5c:53" +# power: +# type: virsh +# address: qemu+ssh://ubuntu@10.4.1.1/system + + # Contains the virtual machine parameters for creating the Juju bootstrap + # node virtual machine + juju-bootstrap: + name: bootstrap + interfaces: ['bridge=br0,model=virtio'] + memory: 4096 + vcpus: 2 + arch: amd64 + pool: default + disk_size: 120G diff --git a/ci/maas/intel/pod5/environment.yaml b/ci/maas/intel/pod5/environment.yaml new file mode 100644 index 00000000..e5b539ca --- /dev/null +++ b/ci/maas/intel/pod5/environment.yaml @@ -0,0 +1,36 @@ +default: demo-maas +environments: + # https://juju.ubuntu.com/docs/config-maas.html + maas: + type: maas + + # maas-server specifies the location of the MAAS server. It must + # specify the base path. + # + maas-server: 'http://10.4.1.1/MAAS/' + + # maas-oauth holds the OAuth credentials from MAAS. + # + maas-oauth: 'c6tcQz4tyS3ALajCtF:sqcWhw8MkxTjUDLZrm:hBhszBLv5EqrY8h6yktFXWUT5825ShvE' + + # maas-server bootstrap ssh connection options + # + + # bootstrap-timeout time to wait contacting a state server, in seconds. + bootstrap-timeout: 1800 + admin-secret: admin + + # Whether or not to refresh the list of available updates for an + # OS. The default option of true is recommended for use in + # production systems, but disabling this can speed up local + # deployments for development or testing. + # + enable-os-refresh-update: false + + # Whether or not to perform OS upgrades when machines are + # provisioned. The default option of true is recommended for use + # in production systems, but disabling this can speed up local + # deployments for development or testing. + # + enable-os-upgrade: false + diff --git a/ci/maas/intel/pod6/deployment.yaml b/ci/maas/intel/pod6/deployment.yaml new file mode 100755 index 00000000..caae88bd --- /dev/null +++ b/ci/maas/intel/pod6/deployment.yaml @@ -0,0 +1,201 @@ +# This file defines the deployment for the MAAS environment which is to be +# deployed and automated. +demo-maas: + maas: + # Defines the general setup for the MAAS environment, including the + # username and password for the host as well as the MAAS server. + user: ubuntu + password: ubuntu + + # Contains the virtual machine parameters for creating the MAAS virtual + # server. Here you can configure the name of the virsh domain, the + # parameters for how the network is attached. + name: maas-boot-vm-dc1 + interfaces: ['bridge=br0,model=virtio'] + memory: 4096 + vcpus: 2 + arch: amd64 + pool: default + disk_size: 160G + + # Apt http proxy setting(s) + apt_http_proxy: + + apt_sources: + - ppa:maas/stable + - ppa:juju/stable + + # Virsh power settings + # Specifies the uri and keys to use for virsh power control of the + # juju virtual machine. If the uri is omitted, the value for the + # --remote is used. If no power settings are desired, then do not + # supply the virsh block. + virsh: + rsa_priv_key: /home/ubuntu/.ssh/id_rsa + rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub + uri: qemu+ssh://ubuntu@10.4.1.1/system + + # Defines the IP Address that the configuration script will use to + # to access the MAAS controller via SSH. + ip_address: 10.4.1.2 + + # This section allows the user to set a series of options on the + # MAAS server itself. The list of config options can be found in + # the upstream MAAS documentation: + # - http://maas.ubuntu.com/docs/api.html#maas-server + settings: + main_archive: http://us.archive.ubuntu.com/ubuntu + upstream_dns: 10.4.0.2 + maas_name: automaas + # kernel_opts: "console=tty0 console=ttyS1,115200n8" + # ntp_server: ntp.ubuntu.com + + # This section is used to define the networking parameters for when + # the node first comes up. It is fed into the meta-data cloud-init + # configuration and is used to configure the networking piece of the + # service. The contents of this section are written directly to the + # /etc/network/interfaces file. + # + # Please note, this is slightly different than the + # node-group-interfaces section below. This will configure the + # machine's networking params, and the node-group-interfaces will + # configure the maas node-group interfaces which is used for + # controlling the dhcp, dns, etc. + network_config: | + auto lo + iface lo inet loopback + + auto eth0 + iface eth0 inet static + address 10.4.1.2 + netmask 255.255.248.0 + network 10.4.0.0 + broadcast 10.4.7.255 + gateway 10.4.0.1 + dns-nameservers 10.4.0.2 127.0.0.1 + + #auto lo + #iface lo inet loopback + + #auto eth0 + #iface eth0 inet static + # address 192.168.122.2 + # netmask 255.255.248.0 + # network 192.168.122.0 + # broadcast 192.168.122.255 + # gateway 192.168.122.1 + # dns-nameservers 192.168.122.1 127.0.0.1 + + # The node-group-interfaces section is used to configure the MAAS + # network interfaces. Basic configuration is supported, such as which + # device should be bound, the range of IP addresses, etc. + # Note: this may contain the special identifiers: + # ${maas_net} - the first 3 octets of the ipv4 address + # ${maas_ip} - the ip address of the MAAS controller + node_group_ifaces: + - device: eth0 + ip: 10.4.1.2 + subnet_mask: 255.255.248.0 + broadcast_ip: 10.4.7.255 + router_ip: 10.4.0.1 + static_range: + low: 10.4.2.20 + high: 10.4.2.254 + dynamic_range: + low: 10.4.1.50 + high: 10.4.1.254 + + # Defines the physical nodes which are added to the MAAS cluster + # controller upon startup of the node. + nodes: + - name: node1 + tags: physical + architecture: amd64/generic + mac_addresses: + - "00:1e:67:e0:0a:4a" + - "00:1e:67:e0:0a:4b" + - "00:1e:67:d0:9a:10" + - "00:1e:67:d0:9a:11" + power: + type: ipmi + address: 10.4.2.8 + user: root + pass: root + driver: LAN_2_0 +# sticky_ip_address: +# mac_address: "38:63:bb:43:b8:9c" +# requested_address: 192.168.122.5 + + - name: node2 + tags: physical + architecture: amd64/generic + mac_addresses: + - "00:1e:67:e0:08:b0" + - "00:1e:67:e0:08:b1" + - "00:1e:67:d0:99:ee" + - "00:1e:67:d0:99:ef" + power: + type: ipmi + address: 10.4.2.9 + user: root + pass: root + driver: LAN_2_0 +# sticky_ip_address: +# mac_address: "38:63:bb:43:b8:9c" +# requested_address: 192.168.122.5 + + - name: node3 + tags: physical + architecture: amd64/generic + mac_addresses: + - "00:1e:67:e0:08:7e" + - "00:1e:67:e0:08:7f" + - "00:1e:67:c2:23:d8" + - "00:1e:67:c2:23:d9" + power: + type: ipmi + address: 10.4.2.7 + user: root + pass: root + driver: LAN_2_0 +# sticky_ip_address: +# mac_address: "38:63:bb:43:b8:9c" +# requested_address: 192.168.122.5 + + - name: node4 + tags: physical + architecture: amd64/generic + mac_addresses: + - "00:1e:67:cf:b8:92" + - "00:1e:67:cf:b8:93" + - "00:1e:67:d0:9b:0c" + - "00:1e:67:d0:9b:0d" + power: + type: ipmi + address: 10.4.2.10 + user: root + pass: root + driver: LAN_2_0 +# sticky_ip_address: +# mac_address: "38:63:bb:43:b8:9c" +# requested_address: 192.168.122.5 + +# - name: jenkins-slave +# tags: jenkins-slave +# architecture: amd64/generic +# mac_addresses: +# - "52:54:00:f0:5c:53" +# power: +# type: virsh +# address: qemu+ssh://ubuntu@10.4.1.1/system + + # Contains the virtual machine parameters for creating the Juju bootstrap + # node virtual machine + juju-bootstrap: + name: bootstrap + interfaces: ['bridge=br0,model=virtio'] + memory: 4096 + vcpus: 2 + arch: amd64 + pool: default + disk_size: 120G diff --git a/ci/maas/orange/pod2/deployment.yaml b/ci/maas/orange/pod2/deployment.yaml new file mode 100755 index 00000000..a52b9ff7 --- /dev/null +++ b/ci/maas/orange/pod2/deployment.yaml @@ -0,0 +1,201 @@ +# This file defines the deployment for the MAAS environment which is to be +# deployed and automated. +demo-maas: + maas: + # Defines the general setup for the MAAS environment, including the + # username and password for the host as well as the MAAS server. + user: ubuntu + password: ubuntu + + # Contains the virtual machine parameters for creating the MAAS virtual + # server. Here you can configure the name of the virsh domain, the + # parameters for how the network is attached. + name: maas-boot-vm-dc1 + interfaces: ['bridge=brAdm,model=virtio'] + memory: 4096 + vcpus: 2 + arch: amd64 + pool: default + disk_size: 160G + + # Apt http proxy setting(s) + apt_http_proxy: + + apt_sources: + - ppa:maas/stable + - ppa:juju/stable + + # Virsh power settings + # Specifies the uri and keys to use for virsh power control of the + # juju virtual machine. If the uri is omitted, the value for the + # --remote is used. If no power settings are desired, then do not + # supply the virsh block. + virsh: + rsa_priv_key: /home/ubuntu/.ssh/id_rsa + rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub + uri: qemu+ssh://ubuntu@192.168.2.4/system + + # Defines the IP Address that the configuration script will use to + # to access the MAAS controller via SSH. + ip_address: 192.168.2.5 + + # This section allows the user to set a series of options on the + # MAAS server itself. The list of config options can be found in + # the upstream MAAS documentation: + # - http://maas.ubuntu.com/docs/api.html#maas-server + settings: + main_archive: http://fr.archive.ubuntu.com/ubuntu + upstream_dns: 192.168.0.4 + maas_name: automaas + # kernel_opts: "console=tty0 console=ttyS1,115200n8" + # ntp_server: ntp.ubuntu.com + + # This section is used to define the networking parameters for when + # the node first comes up. It is fed into the meta-data cloud-init + # configuration and is used to configure the networking piece of the + # service. The contents of this section are written directly to the + # /etc/network/interfaces file. + # + # Please note, this is slightly different than the + # node-group-interfaces section below. This will configure the + # machine's networking params, and the node-group-interfaces will + # configure the maas node-group interfaces which is used for + # controlling the dhcp, dns, etc. + network_config: | + auto lo + iface lo inet loopback + + auto eth0 + iface eth0 inet static + address 192.168.2.5 + netmask 255.255.255.0 + network 192.168.2.0 + broadcast 192.168.2.255 + gateway 192.168.2.4 + dns-nameservers 192.168.0.4 127.0.0.1 + + #auto lo + #iface lo inet loopback + + #auto eth0 + #iface eth0 inet static + # address 192.168.122.2 + # netmask 255.255.248.0 + # network 192.168.122.0 + # broadcast 192.168.122.255 + # gateway 192.168.122.1 + # dns-nameservers 192.168.122.1 127.0.0.1 + + # The node-group-interfaces section is used to configure the MAAS + # network interfaces. Basic configuration is supported, such as which + # device should be bound, the range of IP addresses, etc. + # Note: this may contain the special identifiers: + # ${maas_net} - the first 3 octets of the ipv4 address + # ${maas_ip} - the ip address of the MAAS controller + node_group_ifaces: + - device: eth0 + ip: 192.168.2.5 + subnet_mask: 255.255.255.0 + broadcast_ip: 192.168.2.255 + router_ip: 192.168.2.1 + static_range: + low: 192.168.2.30 + high: 192.168.2.150 + dynamic_range: + low: 192.168.2.151 + high: 192.168.2.254 + + # Defines the physical nodes which are added to the MAAS cluster + # controller upon startup of the node. +# nodes: +# - name: node1 +# tags: physical +# architecture: amd64/generic +# mac_addresses: +# - "00:1e:67:e0:0a:4a" +# - "00:1e:67:e0:0a:4b" +# - "00:1e:67:d0:9a:10" +# - "00:1e:67:d0:9a:11" +# power: +# type: ipmi +# address: 10.4.2.8 +# user: root +# pass: root +# driver: LAN_2_0 +# sticky_ip_address: +# mac_address: "38:63:bb:43:b8:9c" +# requested_address: 192.168.122.5 +# +# - name: node2 +# tags: physical +# architecture: amd64/generic +# mac_addresses: +# - "00:1e:67:e0:08:b0" +# - "00:1e:67:e0:08:b1" +# - "00:1e:67:d0:99:ee" +# - "00:1e:67:d0:99:ef" +# power: +# type: ipmi +# address: 10.4.2.9 +# user: root +# pass: root +# driver: LAN_2_0 +# sticky_ip_address: +# mac_address: "38:63:bb:43:b8:9c" +# requested_address: 192.168.122.5 +# +# - name: node3 +# tags: physical +# architecture: amd64/generic +# mac_addresses: +# - "00:1e:67:e0:08:7e" +# - "00:1e:67:e0:08:7f" +# - "00:1e:67:c2:23:d8" +# - "00:1e:67:c2:23:d9" +# power: +# type: ipmi +# address: 10.4.2.7 +# user: root +# pass: root +# driver: LAN_2_0 +# sticky_ip_address: +# mac_address: "38:63:bb:43:b8:9c" +# requested_address: 192.168.122.5 +# +# - name: node4 +# tags: physical +# architecture: amd64/generic +# mac_addresses: +# - "00:1e:67:cf:b8:92" +# - "00:1e:67:cf:b8:93" +# - "00:1e:67:d0:9b:0c" +# - "00:1e:67:d0:9b:0d" +# power: +# type: ipmi +# address: 10.4.2.10 +# user: root +# pass: root +# driver: LAN_2_0 +# sticky_ip_address: +# mac_address: "38:63:bb:43:b8:9c" +# requested_address: 192.168.122.5 + +# - name: jenkins-slave +# tags: jenkins-slave +# architecture: amd64/generic +# mac_addresses: +# - "52:54:00:f0:5c:53" +# power: +# type: virsh +# address: qemu+ssh://ubuntu@10.4.1.1/system + + # Contains the virtual machine parameters for creating the Juju bootstrap + # node virtual machine + juju-bootstrap: + name: bootstrap + interfaces: ['bridge=brAdm,model=virtio'] + memory: 4096 + vcpus: 2 + arch: amd64 + pool: default + disk_size: 120G |