summaryrefslogtreecommitdiffstats
path: root/ci/maas
diff options
context:
space:
mode:
Diffstat (limited to 'ci/maas')
-rwxr-xr-xci/maas/intel/pod5/deployment.yaml201
-rw-r--r--ci/maas/intel/pod5/environment.yaml36
-rwxr-xr-xci/maas/intel/pod6/deployment.yaml201
-rwxr-xr-xci/maas/orange/pod2/deployment.yaml201
4 files changed, 639 insertions, 0 deletions
diff --git a/ci/maas/intel/pod5/deployment.yaml b/ci/maas/intel/pod5/deployment.yaml
new file mode 100755
index 00000000..caae88bd
--- /dev/null
+++ b/ci/maas/intel/pod5/deployment.yaml
@@ -0,0 +1,201 @@
+# This file defines the deployment for the MAAS environment which is to be
+# deployed and automated.
+demo-maas:
+ maas:
+ # Defines the general setup for the MAAS environment, including the
+ # username and password for the host as well as the MAAS server.
+ user: ubuntu
+ password: ubuntu
+
+ # Contains the virtual machine parameters for creating the MAAS virtual
+ # server. Here you can configure the name of the virsh domain, the
+ # parameters for how the network is attached.
+ name: maas-boot-vm-dc1
+ interfaces: ['bridge=br0,model=virtio']
+ memory: 4096
+ vcpus: 2
+ arch: amd64
+ pool: default
+ disk_size: 160G
+
+ # Apt http proxy setting(s)
+ apt_http_proxy:
+
+ apt_sources:
+ - ppa:maas/stable
+ - ppa:juju/stable
+
+ # Virsh power settings
+ # Specifies the uri and keys to use for virsh power control of the
+ # juju virtual machine. If the uri is omitted, the value for the
+ # --remote is used. If no power settings are desired, then do not
+ # supply the virsh block.
+ virsh:
+ rsa_priv_key: /home/ubuntu/.ssh/id_rsa
+ rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub
+ uri: qemu+ssh://ubuntu@10.4.1.1/system
+
+ # Defines the IP Address that the configuration script will use to
+ # to access the MAAS controller via SSH.
+ ip_address: 10.4.1.2
+
+ # This section allows the user to set a series of options on the
+ # MAAS server itself. The list of config options can be found in
+ # the upstream MAAS documentation:
+ # - http://maas.ubuntu.com/docs/api.html#maas-server
+ settings:
+ main_archive: http://us.archive.ubuntu.com/ubuntu
+ upstream_dns: 10.4.0.2
+ maas_name: automaas
+ # kernel_opts: "console=tty0 console=ttyS1,115200n8"
+ # ntp_server: ntp.ubuntu.com
+
+ # This section is used to define the networking parameters for when
+ # the node first comes up. It is fed into the meta-data cloud-init
+ # configuration and is used to configure the networking piece of the
+ # service. The contents of this section are written directly to the
+ # /etc/network/interfaces file.
+ #
+ # Please note, this is slightly different than the
+ # node-group-interfaces section below. This will configure the
+ # machine's networking params, and the node-group-interfaces will
+ # configure the maas node-group interfaces which is used for
+ # controlling the dhcp, dns, etc.
+ network_config: |
+ auto lo
+ iface lo inet loopback
+
+ auto eth0
+ iface eth0 inet static
+ address 10.4.1.2
+ netmask 255.255.248.0
+ network 10.4.0.0
+ broadcast 10.4.7.255
+ gateway 10.4.0.1
+ dns-nameservers 10.4.0.2 127.0.0.1
+
+ #auto lo
+ #iface lo inet loopback
+
+ #auto eth0
+ #iface eth0 inet static
+ # address 192.168.122.2
+ # netmask 255.255.248.0
+ # network 192.168.122.0
+ # broadcast 192.168.122.255
+ # gateway 192.168.122.1
+ # dns-nameservers 192.168.122.1 127.0.0.1
+
+ # The node-group-interfaces section is used to configure the MAAS
+ # network interfaces. Basic configuration is supported, such as which
+ # device should be bound, the range of IP addresses, etc.
+ # Note: this may contain the special identifiers:
+ # ${maas_net} - the first 3 octets of the ipv4 address
+ # ${maas_ip} - the ip address of the MAAS controller
+ node_group_ifaces:
+ - device: eth0
+ ip: 10.4.1.2
+ subnet_mask: 255.255.248.0
+ broadcast_ip: 10.4.7.255
+ router_ip: 10.4.0.1
+ static_range:
+ low: 10.4.2.20
+ high: 10.4.2.254
+ dynamic_range:
+ low: 10.4.1.50
+ high: 10.4.1.254
+
+ # Defines the physical nodes which are added to the MAAS cluster
+ # controller upon startup of the node.
+ nodes:
+ - name: node1
+ tags: physical
+ architecture: amd64/generic
+ mac_addresses:
+ - "00:1e:67:e0:0a:4a"
+ - "00:1e:67:e0:0a:4b"
+ - "00:1e:67:d0:9a:10"
+ - "00:1e:67:d0:9a:11"
+ power:
+ type: ipmi
+ address: 10.4.2.8
+ user: root
+ pass: root
+ driver: LAN_2_0
+# sticky_ip_address:
+# mac_address: "38:63:bb:43:b8:9c"
+# requested_address: 192.168.122.5
+
+ - name: node2
+ tags: physical
+ architecture: amd64/generic
+ mac_addresses:
+ - "00:1e:67:e0:08:b0"
+ - "00:1e:67:e0:08:b1"
+ - "00:1e:67:d0:99:ee"
+ - "00:1e:67:d0:99:ef"
+ power:
+ type: ipmi
+ address: 10.4.2.9
+ user: root
+ pass: root
+ driver: LAN_2_0
+# sticky_ip_address:
+# mac_address: "38:63:bb:43:b8:9c"
+# requested_address: 192.168.122.5
+
+ - name: node3
+ tags: physical
+ architecture: amd64/generic
+ mac_addresses:
+ - "00:1e:67:e0:08:7e"
+ - "00:1e:67:e0:08:7f"
+ - "00:1e:67:c2:23:d8"
+ - "00:1e:67:c2:23:d9"
+ power:
+ type: ipmi
+ address: 10.4.2.7
+ user: root
+ pass: root
+ driver: LAN_2_0
+# sticky_ip_address:
+# mac_address: "38:63:bb:43:b8:9c"
+# requested_address: 192.168.122.5
+
+ - name: node4
+ tags: physical
+ architecture: amd64/generic
+ mac_addresses:
+ - "00:1e:67:cf:b8:92"
+ - "00:1e:67:cf:b8:93"
+ - "00:1e:67:d0:9b:0c"
+ - "00:1e:67:d0:9b:0d"
+ power:
+ type: ipmi
+ address: 10.4.2.10
+ user: root
+ pass: root
+ driver: LAN_2_0
+# sticky_ip_address:
+# mac_address: "38:63:bb:43:b8:9c"
+# requested_address: 192.168.122.5
+
+# - name: jenkins-slave
+# tags: jenkins-slave
+# architecture: amd64/generic
+# mac_addresses:
+# - "52:54:00:f0:5c:53"
+# power:
+# type: virsh
+# address: qemu+ssh://ubuntu@10.4.1.1/system
+
+ # Contains the virtual machine parameters for creating the Juju bootstrap
+ # node virtual machine
+ juju-bootstrap:
+ name: bootstrap
+ interfaces: ['bridge=br0,model=virtio']
+ memory: 4096
+ vcpus: 2
+ arch: amd64
+ pool: default
+ disk_size: 120G
diff --git a/ci/maas/intel/pod5/environment.yaml b/ci/maas/intel/pod5/environment.yaml
new file mode 100644
index 00000000..e5b539ca
--- /dev/null
+++ b/ci/maas/intel/pod5/environment.yaml
@@ -0,0 +1,36 @@
+default: demo-maas
+environments:
+ # https://juju.ubuntu.com/docs/config-maas.html
+ maas:
+ type: maas
+
+ # maas-server specifies the location of the MAAS server. It must
+ # specify the base path.
+ #
+ maas-server: 'http://10.4.1.1/MAAS/'
+
+ # maas-oauth holds the OAuth credentials from MAAS.
+ #
+ maas-oauth: 'c6tcQz4tyS3ALajCtF:sqcWhw8MkxTjUDLZrm:hBhszBLv5EqrY8h6yktFXWUT5825ShvE'
+
+ # maas-server bootstrap ssh connection options
+ #
+
+ # bootstrap-timeout time to wait contacting a state server, in seconds.
+ bootstrap-timeout: 1800
+ admin-secret: admin
+
+ # Whether or not to refresh the list of available updates for an
+ # OS. The default option of true is recommended for use in
+ # production systems, but disabling this can speed up local
+ # deployments for development or testing.
+ #
+ enable-os-refresh-update: false
+
+ # Whether or not to perform OS upgrades when machines are
+ # provisioned. The default option of true is recommended for use
+ # in production systems, but disabling this can speed up local
+ # deployments for development or testing.
+ #
+ enable-os-upgrade: false
+
diff --git a/ci/maas/intel/pod6/deployment.yaml b/ci/maas/intel/pod6/deployment.yaml
new file mode 100755
index 00000000..caae88bd
--- /dev/null
+++ b/ci/maas/intel/pod6/deployment.yaml
@@ -0,0 +1,201 @@
+# This file defines the deployment for the MAAS environment which is to be
+# deployed and automated.
+demo-maas:
+ maas:
+ # Defines the general setup for the MAAS environment, including the
+ # username and password for the host as well as the MAAS server.
+ user: ubuntu
+ password: ubuntu
+
+ # Contains the virtual machine parameters for creating the MAAS virtual
+ # server. Here you can configure the name of the virsh domain, the
+ # parameters for how the network is attached.
+ name: maas-boot-vm-dc1
+ interfaces: ['bridge=br0,model=virtio']
+ memory: 4096
+ vcpus: 2
+ arch: amd64
+ pool: default
+ disk_size: 160G
+
+ # Apt http proxy setting(s)
+ apt_http_proxy:
+
+ apt_sources:
+ - ppa:maas/stable
+ - ppa:juju/stable
+
+ # Virsh power settings
+ # Specifies the uri and keys to use for virsh power control of the
+ # juju virtual machine. If the uri is omitted, the value for the
+ # --remote is used. If no power settings are desired, then do not
+ # supply the virsh block.
+ virsh:
+ rsa_priv_key: /home/ubuntu/.ssh/id_rsa
+ rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub
+ uri: qemu+ssh://ubuntu@10.4.1.1/system
+
+ # Defines the IP Address that the configuration script will use to
+ # to access the MAAS controller via SSH.
+ ip_address: 10.4.1.2
+
+ # This section allows the user to set a series of options on the
+ # MAAS server itself. The list of config options can be found in
+ # the upstream MAAS documentation:
+ # - http://maas.ubuntu.com/docs/api.html#maas-server
+ settings:
+ main_archive: http://us.archive.ubuntu.com/ubuntu
+ upstream_dns: 10.4.0.2
+ maas_name: automaas
+ # kernel_opts: "console=tty0 console=ttyS1,115200n8"
+ # ntp_server: ntp.ubuntu.com
+
+ # This section is used to define the networking parameters for when
+ # the node first comes up. It is fed into the meta-data cloud-init
+ # configuration and is used to configure the networking piece of the
+ # service. The contents of this section are written directly to the
+ # /etc/network/interfaces file.
+ #
+ # Please note, this is slightly different than the
+ # node-group-interfaces section below. This will configure the
+ # machine's networking params, and the node-group-interfaces will
+ # configure the maas node-group interfaces which is used for
+ # controlling the dhcp, dns, etc.
+ network_config: |
+ auto lo
+ iface lo inet loopback
+
+ auto eth0
+ iface eth0 inet static
+ address 10.4.1.2
+ netmask 255.255.248.0
+ network 10.4.0.0
+ broadcast 10.4.7.255
+ gateway 10.4.0.1
+ dns-nameservers 10.4.0.2 127.0.0.1
+
+ #auto lo
+ #iface lo inet loopback
+
+ #auto eth0
+ #iface eth0 inet static
+ # address 192.168.122.2
+ # netmask 255.255.248.0
+ # network 192.168.122.0
+ # broadcast 192.168.122.255
+ # gateway 192.168.122.1
+ # dns-nameservers 192.168.122.1 127.0.0.1
+
+ # The node-group-interfaces section is used to configure the MAAS
+ # network interfaces. Basic configuration is supported, such as which
+ # device should be bound, the range of IP addresses, etc.
+ # Note: this may contain the special identifiers:
+ # ${maas_net} - the first 3 octets of the ipv4 address
+ # ${maas_ip} - the ip address of the MAAS controller
+ node_group_ifaces:
+ - device: eth0
+ ip: 10.4.1.2
+ subnet_mask: 255.255.248.0
+ broadcast_ip: 10.4.7.255
+ router_ip: 10.4.0.1
+ static_range:
+ low: 10.4.2.20
+ high: 10.4.2.254
+ dynamic_range:
+ low: 10.4.1.50
+ high: 10.4.1.254
+
+ # Defines the physical nodes which are added to the MAAS cluster
+ # controller upon startup of the node.
+ nodes:
+ - name: node1
+ tags: physical
+ architecture: amd64/generic
+ mac_addresses:
+ - "00:1e:67:e0:0a:4a"
+ - "00:1e:67:e0:0a:4b"
+ - "00:1e:67:d0:9a:10"
+ - "00:1e:67:d0:9a:11"
+ power:
+ type: ipmi
+ address: 10.4.2.8
+ user: root
+ pass: root
+ driver: LAN_2_0
+# sticky_ip_address:
+# mac_address: "38:63:bb:43:b8:9c"
+# requested_address: 192.168.122.5
+
+ - name: node2
+ tags: physical
+ architecture: amd64/generic
+ mac_addresses:
+ - "00:1e:67:e0:08:b0"
+ - "00:1e:67:e0:08:b1"
+ - "00:1e:67:d0:99:ee"
+ - "00:1e:67:d0:99:ef"
+ power:
+ type: ipmi
+ address: 10.4.2.9
+ user: root
+ pass: root
+ driver: LAN_2_0
+# sticky_ip_address:
+# mac_address: "38:63:bb:43:b8:9c"
+# requested_address: 192.168.122.5
+
+ - name: node3
+ tags: physical
+ architecture: amd64/generic
+ mac_addresses:
+ - "00:1e:67:e0:08:7e"
+ - "00:1e:67:e0:08:7f"
+ - "00:1e:67:c2:23:d8"
+ - "00:1e:67:c2:23:d9"
+ power:
+ type: ipmi
+ address: 10.4.2.7
+ user: root
+ pass: root
+ driver: LAN_2_0
+# sticky_ip_address:
+# mac_address: "38:63:bb:43:b8:9c"
+# requested_address: 192.168.122.5
+
+ - name: node4
+ tags: physical
+ architecture: amd64/generic
+ mac_addresses:
+ - "00:1e:67:cf:b8:92"
+ - "00:1e:67:cf:b8:93"
+ - "00:1e:67:d0:9b:0c"
+ - "00:1e:67:d0:9b:0d"
+ power:
+ type: ipmi
+ address: 10.4.2.10
+ user: root
+ pass: root
+ driver: LAN_2_0
+# sticky_ip_address:
+# mac_address: "38:63:bb:43:b8:9c"
+# requested_address: 192.168.122.5
+
+# - name: jenkins-slave
+# tags: jenkins-slave
+# architecture: amd64/generic
+# mac_addresses:
+# - "52:54:00:f0:5c:53"
+# power:
+# type: virsh
+# address: qemu+ssh://ubuntu@10.4.1.1/system
+
+ # Contains the virtual machine parameters for creating the Juju bootstrap
+ # node virtual machine
+ juju-bootstrap:
+ name: bootstrap
+ interfaces: ['bridge=br0,model=virtio']
+ memory: 4096
+ vcpus: 2
+ arch: amd64
+ pool: default
+ disk_size: 120G
diff --git a/ci/maas/orange/pod2/deployment.yaml b/ci/maas/orange/pod2/deployment.yaml
new file mode 100755
index 00000000..a52b9ff7
--- /dev/null
+++ b/ci/maas/orange/pod2/deployment.yaml
@@ -0,0 +1,201 @@
+# This file defines the deployment for the MAAS environment which is to be
+# deployed and automated.
+demo-maas:
+ maas:
+ # Defines the general setup for the MAAS environment, including the
+ # username and password for the host as well as the MAAS server.
+ user: ubuntu
+ password: ubuntu
+
+ # Contains the virtual machine parameters for creating the MAAS virtual
+ # server. Here you can configure the name of the virsh domain, the
+ # parameters for how the network is attached.
+ name: maas-boot-vm-dc1
+ interfaces: ['bridge=brAdm,model=virtio']
+ memory: 4096
+ vcpus: 2
+ arch: amd64
+ pool: default
+ disk_size: 160G
+
+ # Apt http proxy setting(s)
+ apt_http_proxy:
+
+ apt_sources:
+ - ppa:maas/stable
+ - ppa:juju/stable
+
+ # Virsh power settings
+ # Specifies the uri and keys to use for virsh power control of the
+ # juju virtual machine. If the uri is omitted, the value for the
+ # --remote is used. If no power settings are desired, then do not
+ # supply the virsh block.
+ virsh:
+ rsa_priv_key: /home/ubuntu/.ssh/id_rsa
+ rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub
+ uri: qemu+ssh://ubuntu@192.168.2.4/system
+
+ # Defines the IP Address that the configuration script will use to
+ # to access the MAAS controller via SSH.
+ ip_address: 192.168.2.5
+
+ # This section allows the user to set a series of options on the
+ # MAAS server itself. The list of config options can be found in
+ # the upstream MAAS documentation:
+ # - http://maas.ubuntu.com/docs/api.html#maas-server
+ settings:
+ main_archive: http://fr.archive.ubuntu.com/ubuntu
+ upstream_dns: 192.168.0.4
+ maas_name: automaas
+ # kernel_opts: "console=tty0 console=ttyS1,115200n8"
+ # ntp_server: ntp.ubuntu.com
+
+ # This section is used to define the networking parameters for when
+ # the node first comes up. It is fed into the meta-data cloud-init
+ # configuration and is used to configure the networking piece of the
+ # service. The contents of this section are written directly to the
+ # /etc/network/interfaces file.
+ #
+ # Please note, this is slightly different than the
+ # node-group-interfaces section below. This will configure the
+ # machine's networking params, and the node-group-interfaces will
+ # configure the maas node-group interfaces which is used for
+ # controlling the dhcp, dns, etc.
+ network_config: |
+ auto lo
+ iface lo inet loopback
+
+ auto eth0
+ iface eth0 inet static
+ address 192.168.2.5
+ netmask 255.255.255.0
+ network 192.168.2.0
+ broadcast 192.168.2.255
+ gateway 192.168.2.4
+ dns-nameservers 192.168.0.4 127.0.0.1
+
+ #auto lo
+ #iface lo inet loopback
+
+ #auto eth0
+ #iface eth0 inet static
+ # address 192.168.122.2
+ # netmask 255.255.248.0
+ # network 192.168.122.0
+ # broadcast 192.168.122.255
+ # gateway 192.168.122.1
+ # dns-nameservers 192.168.122.1 127.0.0.1
+
+ # The node-group-interfaces section is used to configure the MAAS
+ # network interfaces. Basic configuration is supported, such as which
+ # device should be bound, the range of IP addresses, etc.
+ # Note: this may contain the special identifiers:
+ # ${maas_net} - the first 3 octets of the ipv4 address
+ # ${maas_ip} - the ip address of the MAAS controller
+ node_group_ifaces:
+ - device: eth0
+ ip: 192.168.2.5
+ subnet_mask: 255.255.255.0
+ broadcast_ip: 192.168.2.255
+ router_ip: 192.168.2.1
+ static_range:
+ low: 192.168.2.30
+ high: 192.168.2.150
+ dynamic_range:
+ low: 192.168.2.151
+ high: 192.168.2.254
+
+ # Defines the physical nodes which are added to the MAAS cluster
+ # controller upon startup of the node.
+# nodes:
+# - name: node1
+# tags: physical
+# architecture: amd64/generic
+# mac_addresses:
+# - "00:1e:67:e0:0a:4a"
+# - "00:1e:67:e0:0a:4b"
+# - "00:1e:67:d0:9a:10"
+# - "00:1e:67:d0:9a:11"
+# power:
+# type: ipmi
+# address: 10.4.2.8
+# user: root
+# pass: root
+# driver: LAN_2_0
+# sticky_ip_address:
+# mac_address: "38:63:bb:43:b8:9c"
+# requested_address: 192.168.122.5
+#
+# - name: node2
+# tags: physical
+# architecture: amd64/generic
+# mac_addresses:
+# - "00:1e:67:e0:08:b0"
+# - "00:1e:67:e0:08:b1"
+# - "00:1e:67:d0:99:ee"
+# - "00:1e:67:d0:99:ef"
+# power:
+# type: ipmi
+# address: 10.4.2.9
+# user: root
+# pass: root
+# driver: LAN_2_0
+# sticky_ip_address:
+# mac_address: "38:63:bb:43:b8:9c"
+# requested_address: 192.168.122.5
+#
+# - name: node3
+# tags: physical
+# architecture: amd64/generic
+# mac_addresses:
+# - "00:1e:67:e0:08:7e"
+# - "00:1e:67:e0:08:7f"
+# - "00:1e:67:c2:23:d8"
+# - "00:1e:67:c2:23:d9"
+# power:
+# type: ipmi
+# address: 10.4.2.7
+# user: root
+# pass: root
+# driver: LAN_2_0
+# sticky_ip_address:
+# mac_address: "38:63:bb:43:b8:9c"
+# requested_address: 192.168.122.5
+#
+# - name: node4
+# tags: physical
+# architecture: amd64/generic
+# mac_addresses:
+# - "00:1e:67:cf:b8:92"
+# - "00:1e:67:cf:b8:93"
+# - "00:1e:67:d0:9b:0c"
+# - "00:1e:67:d0:9b:0d"
+# power:
+# type: ipmi
+# address: 10.4.2.10
+# user: root
+# pass: root
+# driver: LAN_2_0
+# sticky_ip_address:
+# mac_address: "38:63:bb:43:b8:9c"
+# requested_address: 192.168.122.5
+
+# - name: jenkins-slave
+# tags: jenkins-slave
+# architecture: amd64/generic
+# mac_addresses:
+# - "52:54:00:f0:5c:53"
+# power:
+# type: virsh
+# address: qemu+ssh://ubuntu@10.4.1.1/system
+
+ # Contains the virtual machine parameters for creating the Juju bootstrap
+ # node virtual machine
+ juju-bootstrap:
+ name: bootstrap
+ interfaces: ['bridge=brAdm,model=virtio']
+ memory: 4096
+ vcpus: 2
+ arch: amd64
+ pool: default
+ disk_size: 120G