diff options
Diffstat (limited to 'ci/maas/cengn_lynx/pod1/deployment.yaml')
| -rwxr-xr-x | ci/maas/cengn_lynx/pod1/deployment.yaml | 229 |
1 files changed, 0 insertions, 229 deletions
diff --git a/ci/maas/cengn_lynx/pod1/deployment.yaml b/ci/maas/cengn_lynx/pod1/deployment.yaml deleted file mode 100755 index fe71144a..00000000 --- a/ci/maas/cengn_lynx/pod1/deployment.yaml +++ /dev/null @@ -1,229 +0,0 @@ -# This file defines the deployment for the MAAS environment which is to be -# deployed and automated. -cengn-lynx-pod1: - maas: - # Defines the general setup for the MAAS environment, including the - # username and password for the host as well as the MAAS server. - user: ubuntu - password: ubuntu - - # Contains the virtual machine parameters for creating the MAAS virtual - # server. Here you can configure the name of the virsh domain, the - # parameters for how the network is attached. - name: opnfv-maas-cengn-lynx - interfaces: ['bridge=brAdm,model=virtio','bridge=brData,model=virtio','bridge=brPublic,model=virtio'] - memory: 4096 - vcpus: 4 - arch: amd64 - pool: default - disk_size: 160G - series: trusty - - # Apt http proxy setting(s) - apt_http_proxy: - - apt_sources: - - ppa:maas/stable - - ppa:juju/stable - - boot_source: - url: http://maas.ubuntu.com/images/ephemeral-v2/daily/ - keyring_filename: /usr/share/keyrings/ubuntu-cloudimage-keyring.gpg - exclusive: true - selections: - 1: - release: trusty - os: ubuntu - arches: amd64 - subarches: "*" - labels: daily - 2: - release: xenial - os: ubuntu - arches: amd64 - subarches: "*" - labels: daily - - # Virsh power settings - # Specifies the uri and keys to use for virsh power control of the - # juju virtual machine. If the uri is omitted, the value for the - # --remote is used. If no power settings are desired, then do not - # supply the virsh block. - virsh: - rsa_priv_key: /home/ubuntu/.ssh/id_rsa - rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub - uri: qemu+ssh://ubuntu@10.120.0.2/system - - # Defines the IP Address that the configuration script will use to - # to access the MAAS controller via SSH. - ip_address: 10.120.0.3 - - # This section allows the user to set a series of options on the - # MAAS server itself. The list of config options can be found in - # the upstream MAAS documentation: - # - http://maas.ubuntu.com/docs/api.html#maas-server - settings: - upstream_dns: 192.168.60.1 - maas_name: cengnlynxpod1 - # kernel_opts: "console=tty0 console=ttyS1,115200n8" - # ntp_server: ntp.ubuntu.com - - # This section is used to define the networking parameters for when - # the node first comes up. It is fed into the meta-data cloud-init - # configuration and is used to configure the networking piece of the - # service. The contents of this section are written directly to the - # /etc/network/interfaces file. - # - # Please note, this is slightly different than the - # node-group-interfaces section below. This will configure the - # machine's networking params, and the node-group-interfaces will - # configure the maas node-group interfaces which is used for - # controlling the dhcp, dns, etc. - network_config: | - auto lo - iface lo inet loopback - - auto eth0 - iface eth0 inet static - address 10.120.0.3 - netmask 255.255.255.0 - network 10.120.0.0 - broadcast 10.120.0.255 - gateway 10.120.0.254 - dns-nameservers 192.168.60.1 8.8.8.8 127.0.0.1 - - auto eth1 - iface eth1 inet static - address 172.16.121.3 - netmask 255.255.255.0 - - auto eth2 - iface eth2 inet static - address 172.16.122.3 - netmask 255.255.255.0 - - - # The node-group-interfaces section is used to configure the MAAS - # network interfaces. Basic configuration is supported, such as which - # device should be bound, the range of IP addresses, etc. - # Note: this may contain the special identifiers: - # ${maas_net} - the first 3 octets of the ipv4 address - # ${maas_ip} - the ip address of the MAAS controller - node_group_ifaces: - - device: eth0 - ip: 10.120.0.3 - subnet_mask: 255.255.255.0 - broadcast_ip: 10.120.0.255 - router_ip: 10.120.0.254 - static_range: - low: 10.120.0.50 - high: 10.120.0.80 - dynamic_range: - low: 10.120.0.81 - high: 10.120.0.249 - - device: eth1 - ip: 172.16.121.3 - subnet_mask: 255.255.255.0 - broadcast_ip: 172.16.121.255 - management: 1 - static_range: - low: 172.16.121.50 - high: 172.16.121.80 - dynamic_range: - low: 172.16.121.81 - high: 172.16.121.249 - - device: eth2 - ip: 172.16.122.3 - subnet_mask: 255.255.255.0 - broadcast_ip: 172.16.122.255 - management: 1 - static_range: - low: 172.16.122.50 - high: 172.16.122.80 - dynamic_range: - low: 172.16.122.81 - high: 172.16.122.249 - - # Defines the physical nodes which are added to the MAAS cluster - # controller upon startup of the node. - nodes: - - name: node3-control - tags: control - architecture: amd64/generic - mac_addresses: - - "0c:c4:7a:3a:c5:b6" - power: - type: ipmi - address: 192.168.42.72 - user: root - pass: root - driver: LAN_2_0 - - - name: node2-compute - tags: compute - architecture: amd64/generic - mac_addresses: - - "0c:c4:7a:3a:b2:ae" - power: - type: ipmi - address: 192.168.42.40 - user: root - pass: root - driver: LAN_2_0 - - - name: node1-compute - tags: compute - architecture: amd64/generic - mac_addresses: - - "0c:c4:7a:1f:6f:c0" - power: - type: ipmi - address: 192.168.42.33 - user: root - pass: root - driver: LAN_2_0 - - - name: node4-control - tags: control - architecture: amd64/generic - mac_addresses: - - "0c:c4:7a:31:9d:bc" - power: - type: ipmi - address: 192.168.42.6 - user: root - pass: root - driver: LAN_2_0 - - - name: node5-control - tags: control - architecture: amd64/generic - mac_addresses: - - "00:25:90:fd:2e:48" - power: - type: ipmi - address: 192.168.42.35 - user: root - pass: root - driver: LAN_2_0 - - -# - name: jenkins-slave -# tags: jenkins-slave -# architecture: amd64/generic -# mac_addresses: -# - "52:54:00:f0:5c:53" -# power: -# type: virsh -# address: qemu+ssh://ubuntu@10.4.1.1/system - - # Contains the virtual machine parameters for creating the Juju bootstrap - # node virtual machine - juju-bootstrap: - name: bootstrap - interfaces: ['bridge=brAdm,model=virtio','bridge=brPublic,model=virtio'] - memory: 4096 - vcpus: 4 - arch: amd64 - pool: default - disk_size: 120G |