summaryrefslogtreecommitdiffstats
path: root/ci/maas/att/virpod1
diff options
context:
space:
mode:
Diffstat (limited to 'ci/maas/att/virpod1')
-rw-r--r--ci/maas/att/virpod1/deployment.yaml126
1 files changed, 0 insertions, 126 deletions
diff --git a/ci/maas/att/virpod1/deployment.yaml b/ci/maas/att/virpod1/deployment.yaml
deleted file mode 100644
index f03031fe..00000000
--- a/ci/maas/att/virpod1/deployment.yaml
+++ /dev/null
@@ -1,126 +0,0 @@
-# This file defines the deployment for the MAAS environment which is to be
-# deployed and automated.
-demo-maas:
- maas:
- # Defines the general setup for the MAAS environment, including the
- # username and password for the host as well as the MAAS server.
- user: ubuntu
- password: ubuntu
-
- # Contains the virtual machine parameters for creating the MAAS virtual
- # server. Here you can configure the name of the virsh domain, the
- # parameters for how the network is attached.
- name: opnfv-maas-att
- interfaces: ['bridge=brAdm,model=virtio']
- memory: 4096
- vcpus: 2
- arch: amd64
- pool: default
- disk_size: 160G
-
- # Apt http proxy setting(s)
- apt_http_proxy:
-
- apt_sources:
- - ppa:maas/stable
- - ppa:juju/stable
-
- # Virsh power settings
- # Specifies the uri and keys to use for virsh power control of the
- # juju virtual machine. If the uri is omitted, the value for the
- # --remote is used. If no power settings are desired, then do not
- # supply the virsh block.
- virsh:
- rsa_priv_key: /home/ubuntu/.ssh/id_rsa
- rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub
- uri: qemu+ssh://ubuntu@192.168.10.2/system
-
- # Defines the IP Address that the configuration script will use to
- # to access the MAAS controller via SSH.
- ip_address: 192.168.10.3
-
- # This section allows the user to set a series of options on the
- # MAAS server itself. The list of config options can be found in
- # the upstream MAAS documentation:
- # - http://maas.ubuntu.com/docs/api.html#maas-server
- settings:
- main_archive: http://us.archive.ubuntu.com/ubuntu
- upstream_dns: 8.8.8.8
- maas_name: attvirpod1
- # kernel_opts: "console=tty0 console=ttyS1,115200n8"
- # ntp_server: ntp.ubuntu.com
-
- # This section is used to define the networking parameters for when
- # the node first comes up. It is fed into the meta-data cloud-init
- # configuration and is used to configure the networking piece of the
- # service. The contents of this section are written directly to the
- # /etc/network/interfaces file.
- #
- # Please note, this is slightly different than the
- # node-group-interfaces section below. This will configure the
- # machine's networking params, and the node-group-interfaces will
- # configure the maas node-group interfaces which is used for
- # controlling the dhcp, dns, etc.
- network_config: |
- auto lo
- iface lo inet loopback
-
- auto eth0
- iface eth0 inet static
- address 192.168.10.3
- netmask 255.255.255.0
- network 192.168.10.0
- broadcast 192.168.10.255
- gateway 192.168.10.1
- dns-nameservers 8.8.8.8 127.0.0.1
-
- # The node-group-interfaces section is used to configure the MAAS
- # network interfaces. Basic configuration is supported, such as which
- # device should be bound, the range of IP addresses, etc.
- # Note: this may contain the special identifiers:
- # ${maas_net} - the first 3 octets of the ipv4 address
- # ${maas_ip} - the ip address of the MAAS controller
- node_group_ifaces:
- - device: eth0
- ip: 192.168.10.3
- subnet_mask: 255.255.255.0
- broadcast_ip: 192.168.10.255
- router_ip: 192.168.10.1
- static_range:
- low: 192.168.10.20
- high: 192.168.10.100
- dynamic_range:
- low: 192.168.10.101
- high: 192.168.10.200
-
- # Defines the physical nodes which are added to the MAAS cluster
- # controller upon startup of the node.
- nodes:
- - name: node1-control
- tags: control
- architecture: amd64/generic
- mac_addresses:
- - "<controller1-mac>"
- power:
- type: ether_wake
- mac_address: <controller1-mac>
-
- - name: node2-compute
- tags: compute
- architecture: amd64/generic
- mac_addresses:
- - "<compute1-mac>"
- power:
- type: ether_wake
- mac_address: <compute1-mac>
-
- # Contains the virtual machine parameters for creating the Juju bootstrap
- # node virtual machine
- juju-bootstrap:
- name: bootstrap
- interfaces: ['bridge=brAdm,model=virtio']
- memory: 4096
- vcpus: 2
- arch: amd64
- pool: default
- disk_size: 120G